summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-10-18Merge tag 'u-boot-amlogic-20191018' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - document alternative libretech-cc installation methods, including upstream TF-A and opensource tools - add HDMI/CVBS display support for Amlogic G12A SoCs and SEI510 board - add support for Amlogic A311D based Khadas VIM3 - add support for Amlogic S905X3 based SEI610 board, targeting Android support like SEI510
2019-10-18Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Support sifive DM based gpio driver for FU540-SoC. - Align boot image header with Linux v5.3
2019-10-18configs: sei610: Add config file to fix userdata sizeGuillaume La Roque
Add separate config file to handle the different eMMC size on the sei610 board. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: rework header and fix userdata sizeGuillaume La Roque
Move android generic config and boot sequence in meson64_android header and fix size of userdata to use all eMMC on SEI510. Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18boards: amlogic: add SEI610 supportNeil Armstrong
Add support for the customer board SEI610 manufactured by SEI Robotics with the following specifications: - Amlogic S905X3 ARM Cortex-A55 quad-core SoC - 2GB DDR4 SDRAM - 10/100 Ethernet (Internal PHY) - 1 x USB 3.0 Host - 1 x USB Type-C DRD - 1 x FTDI USB Serial Debug Interface - eMMC - SDcard - Infrared receiver - SDIO WiFi Module Like it's SEI510 counterpart, the boot flow is designed to boot Android AOSP built for the Yukawa Android device. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: meson-sm1: add U-Boot specific DT for graphicsNeil Armstrong
Rename meson-g12a-u-boot.dtsi into meson-g12-common-u-boot.dtsi to match the new DT architecture and add meson-sm1-sei610-u-boot.dtsi to handle the U-Boot specific DT for graphics. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable everything-else power domainNeil Armstrong
The GX VPU Power Domain driver has been replaced by the Everything-Else Power Domain driver for G12A and SM1. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18power: domain: add Amlogic Everything-Else power domain driverNeil Armstrong
Based on the 54ecb8f7028c ("Linux 5.4-rc1") Everything-Else power domain driver for Amlogic SoCs. This driver handles the VPU Power domain and other domains from the Everything-Else part of the SM1 and G12A SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: dts: Import SEI610 DT from Linux 5.4-rc2Neil Armstrong
Import the Amlogic SM1 DT and the SEI610 board DT from [1] [1] da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18clk: meson-sm1: add compatibleNeil Armstrong
The SM1 clock controller is almost identical to the G12A and so far the differences don't matter. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18mmc: meson-gx: add support for mmc-pwrseq-emmcNeil Armstrong
Add support for mmc-pwrseq-emmc in the meson-gx mmc driver to support enabling the eMMC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18ARM: meson: add SM1 SoC idNeil Armstrong
Add the missing IDs to detect the SM1 S905X3 SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Recognize A311D SoCAndreas Färber
Values imported from Linux driver, but in correct numeric order. Khadas VIM3 prints: Amlogic Meson G12B (A311D) Revision 29:b (10:2) Cc: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: meson: Tidy SoC information outputAndreas Färber
Write SoC instead of Soc. The Linux driver is not affected. Fixes: f41d723b9f ("ARM: meson: display Amlogic SoC Information") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: Add Khadas VIM3 defconfigAndreas Färber
Derived from odroid-n2_defconfig and README.odroid-n2. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18arm: dts: Import and update DT for Khadas VIM3Andreas Färber
In Linux meson-g12-common.dtsi was introduced as well as new g12b nodes and headers, as dependencies of new meson-g12b-a311d-khadas-vim3.dts. Copied from da0c9ea146cb ("Linux 5.4-rc2") Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18configs: sei510: enable Video Display supportNeil Armstrong
Add the necessary config options to support BMP display over HDMI, and add a preboot command to load the BMP file from a predefined eMMC partition. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18ARM: dts: meson-g12a: add U-Boot specific DT for graphicsNeil Armstrong
Like the meson-gx support, add the U-Boot specific bits in DT to support graphics on G12A SoCs. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18arm: meson: board-g12a: Setup VPU in fdtNeil Armstrong
If VIDEO_MESON is enabled, we need to setup the fdt for the framebuffer. Call meson_vpu_rsv_fb() which reserves the framebuffer memory region for EFI, and sets up simple-framebuffer nodes if simplefb support is enabled. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: add compatible for Amlogic G12ANeil Armstrong
Finally add the Amlogic G12A SoC compatible for the VPU driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: sync with linux drm-misc treeNeil Armstrong
Synchronize the Amlogic Meson Video driver back with the latest DRM misc tree, adding G12A platform support, from the latest commit: 528a25d040bc ("drm: meson: use match data to detect vpu compatibility") The sync includes the following changes from Linux adapted to U-Boot: - Add support for VIC alternate timings - Switch PLL to 5.94GHz base for 297Mhz pixel clock - Add registers for G12A SoC - Add G12A Support for VPP setup - Add G12A Support for VIU setup - Add G12A support for OSD1 Plane - Add G12A support for plane handling in CRTC driver - Add G12A support for CVBS Encoder - Add G12A Video Clock setup - Add G12A support for the DW-HDMI Glue - fix G12A HDMI PLL settings for 4K60 1000/1001 variations - fix primary plane disabling - fix G12A primary plane disabling - mask value when writing bits relaxed - crtc: drv: vpp: viu: venc: use proper macros instead of magic constants - global clean-up - add macro used to enable HDMI PLL - venc: set the correct macrovision max amplitude value Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18video: meson: remove power domain getNeil Armstrong
Remove getting and enabling the node power domain since it's now handled by the dm core directly. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18clk: meson: g12a: add support for VPU/HDMI clocksNeil Armstrong
Add necessary clock support to set up clock for the VPU and HDMI support. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18power: domain: meson-gx-pwrc: add G12A supportNeil Armstrong
Add Amlogic G12A support for the gx-pwrc driver, aligned on the Linux v5.2 driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Anatolij Gustschin <agust@denx.de>
2019-10-18board: amlogic: document alternative libretech-cc installation methodsDaniel Drake
As already documented in this README, several binaries must be glued together in order to boot the device. Extend the documentation to cover the prebuilt binaries (saving you the hassle of installing ancient cross-compilers), and also mention the open source replacements for the encryption tool (which is especially useful if you want to avoid requiring 32-bit x86 binaries in your build system). Signed-off-by: Daniel Drake <drake@endlessm.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-18RISC-V: Align boot image header with LinuxAtish Patra
The released Linux boot image header in v5.3 is different from the one present in U-Boot. Align the header with the new version. The changes in Linux are backward compatible. Previous U-Boot releases with older header will continue to work as well. As v5.3 kernel is the first one to support image header, there is no compatibility issue between new U-Boot (with this patch) and older kernel. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-10-18configs: fu540: enable gpio driverSagar Shrikant Kadam
Enable the DM based GPIO driver for FU540-C000 SoC. Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-18gpio: sifive: add support for DM based gpio driver for FU540-SoCSagar Shrikant Kadam
This patch adds a DM based driver model for gpio controller present in FU540-C000 SoC on HiFive Unleashed A00 board. This SoC has one GPIO bank and 16 GPIO lines in total, out of which GPIO0 to GPIO9 and GPIO15 are routed to the J1 header on the board. This implementation is ported from linux based gpio driver submitted for review by Wesley W. Terpstra <wesley@sifive.com> and/or Atish Patra <atish.patra@wdc.com> (many thanks !!). The linux driver can be referred here [1] [1]: https://lkml.org/lkml/2018/10/9/1103 Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-17efi_loader: enable CONFIG_CMD_NVEDIT_EFI on QEMUHeinrich Schuchardt
To reduce the default image size CONFIG_CMD_NVEDIT_EFI was disabled by default. Re-enable it on the QEMU platforms supporting the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17efi_loader: disk: install FILE_SYSTEM_PROTOCOL only if availableAKASHI Takahiro
In the current implementation, EFI_SIMPLEFILE_SYSTEM_PROTOCOL is always installed to all the partitions even if some of them may house no file system. With this patch, that protocol will be installed only if any file system exists. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: add fs_get_type() for current filesystem typeAKASHI Takahiro
This function is a variant of fs_get_type_name() and returns a filesystem type with which the current device is associated. We don't want to export fs_type variable directly because we have to take care of it consistently within fs.c. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: clean up around fs_typeAKASHI Takahiro
fs_ls(), fs_mkdir() and fs_unlink() sets fs_type to FS_TYPE_ANY explicitly, but it is redundant as they call fs_close(). So just remove those lines. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: update fs_close() descriptionHeinrich Schuchardt
Provide a more detailed description of fs_close(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17fs: export fs_close()AKASHI Takahiro
fs_close() closes the connection to a file system which opened with either fs_set_blk_dev() or fs_set_dev_with_part(). Many file system functions implicitly call fs_close(), e.g. fs_closedir(), fs_exist(), fs_ln(), fs_ls(), fs_mkdir(), fs_read(), fs_size(), fs_write() and fs_unlink(). So just export it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17efi_loader: device_path: check against file path lengthAKASHI Takahiro
device_path strcuture has 2 bytes of "length" field, and so file path length should not exceed this limit, 65535. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-10-17Merge tag 'for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-ubiTom Rini
ubi enhancements for 2020.01 - provide a way for skipping crc checks ported from linux, and add an U-Boot command to set this flag on already installed systems. - fix redundand environment management
2019-10-16Merge tag 'dm-pull-15oct19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman enhancements: - Dropping some test Elf files and building them from source instead - Refactoring of x86 16-bit entries - Support for SPL symbols within sections - Handle the 'notes' sections and hidden symbols in recent binutils - Improved error reporting with a tool fails libfdt and documentation fixes vboot required-key test driver model power-domain controls patman Message-Id enhancement
2019-10-16Merge branch '2019-10-15-master-imports'Tom Rini
- Split travis jobs again so we don't have failures due to excessive build times. - Android image updates - cscope bugfix, update ARM maintainers entry, drop H2200 platform.
2019-10-16travis: Split and rename xilinx ARM in to two jobsTom Rini
Split the ARMv7 and AArch64 platforms into separate jobs, to avoid them taking too long to build overall. Also rename them from "Xilinx" to "Zynq*" to reflect slightly better what is being built and to pull in a few more board matches. Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16travis: Split sun8i in to two jobsTom Rini
Split the 32bit and 64bit platforms into separate jobs, to avoid them taking too long to build overall. Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16travis: Split i.MX jobs a bit moreTom Rini
- Split "tqc" and "technexion" out into their own jobs and exclude them from the catch-all jobs - Clarify the job labels a little more. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefano Babic <sbabic@denx.de>
2019-10-16MAINTAINERS: Update ARM entryTom Rini
Fully take over the ARM maintainers entry. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
2019-10-16Makefile: Skip symbolic links to files for cscopeAndy Shevchenko
cscope complains that it can't find files that appears to be symbolic links cscope: cannot find file tools/binman/test/u_boot_binman_syms_bad.c cscope: cannot find file tools/version.h `find -L` tests properties, but name, and cscope can't cope with symbolic links (a lot of bugs in upstream were simple closed as kinda invalid). To work around the problem, exclude symbolic links from the cscope.files. Note, it's done in two pass to speed up the process (`-exec realpath ...` approach is not portable and introduces a 3x delay). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-16arm: remove the H2200 boardHeinrich Schuchardt
U-Boot cannot be built for h2200_defconfig with CONFIG_DM=y. The maintainer Lukasz Dalek suggested to remove the board. https://lists.denx.de/pipermail/u-boot/2019-August/380685.html Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [trini: As this is the last non-toradex PXA board, update travis too] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-16ubi: env: fix redundand managementPhilippe Reynes
We check (with a #if defined()) the config ENV_UBI_VOLUME_REDUND to know if there is a redundant env. But this config is a string and is always defined with env is in ubi, so we always consider that a redundand env is used. To fix this issue, I've added a hidden flag ENV_UBI_IS_VOLUME_REDUND that is true when ENV_UBI_VOLUME_REDUND is not "". Then, I check this flag in the code, instead of the string ENV_UBI_VOLUME_REDUND. hs: fixed typo s/condider/consider Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-10-16ubi: Add "skipcheck" command to set/clear this bit in the UBI volume hdrStefan Roese
U-Boot now supports the "skip_check" flag to optionally skip the CRC check at open time. Currently its only possible to set this bit upon UBI volume creation. But it might be very useful to also set this bit on already installed systems (e.g. field upgrade) to make also use of the boot-time decrease on those systems. This patch now adds a new "ubi" command "ubi skipcheck" to set or clear this bit in the UBI volume header: => ubi skipcheck rootfs0 on Setting skip_check on volume rootfs0 BTW: This saves approx. 10 seconds Linux bootup time on a MT7688 based target with 128MiB of SPI NAND. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Heiko Schocher <hs@denx.de> Cc: Andreas Dannenberg <dannenberg@ti.com>
2019-10-16ubi: Print skip_check in ubi_dump_vol_info()Stefan Roese
It might be interesting, if "skip_check" is set or not, so lets print this flag in ubi_dump_vol_info() as well. hs: fix typo in commit message Signed-off-by: Stefan Roese <sr@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
2019-10-16ubi: provide a way to skip CRC checksQuentin Schulz
Some users of static UBI volumes implement their own integrity check, thus making the volume CRC check done at open time useless. For instance, this is the case when one use the ubiblock + dm-verity + squashfs combination, where dm-verity already checks integrity of the block device but this time at the block granularity instead of verifying the whole volume. Skipping this test drastically improves the boot-time. Adapted to U-Boot by Stefan Roese. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Quentin Schulz <quentin.schulz@bootlin.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-15sandbox: fix build error due to missing struct udevice definitionAKASHI Takahiro
Without this patch, compiling may potentially fail. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-10-15dm: Tidy up dump output when there are many devicesPatrick Delaunay
At present the 'Index' column of 'dm tree' assumes there is two digits, this patch increase it to 3 digits. It also aligns output of 'dm uclass', assuming the same 3 digits index. The boards with CONFIG_PINCTRL_FULL activated have one pinconfig by pin configuration, so they can have more than 100 devices pinconfig (for example with stm32mp157c-ev1 board we have 106 pinconfig node). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-01-15 11:49:01 +0000