summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-20ARM: uniphier: set active ways to really enable outer cacheMasahiro Yamada
Each way must be unlocked to make it effective. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: fix range invalidate for outer cacheMasahiro Yamada
If invalidate operation is invoked against a cache-unaliged region, the both ends of the region should be flushed, not invalidated. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: factor out outer cache sync as a helper functionMasahiro Yamada
Avoid repeating the same code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: refactor outer cache operation slightlyMasahiro Yamada
Improve readability without changing the behavior. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: add bootm_low environmentMasahiro Yamada
The load address of the kernel can be changed via "kernel_addr_r" environment. The device tree and the initramdisk should be relocated according to the kernel location. The "bootm_low" should be calculated by masking the lower bits (TEXT_OFFSET part) of the "kernel_addr_r" environment value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-20ARM: uniphier: define CONFIG_SYS_BOOTMAPSZMasahiro Yamada
U-Boot relocates the device tree and the initramdisk to the tail of the memory region before booting the kernel. Some UniPhier boards are equipped with a large amount of memory. For those boards, the device tree and the initramdisk are placed out of the the kernel causing a kernel panic. Add CONFIG_SYS_BOOTMAPSZ to prevent them from going too high. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-01-19armv8: cavium: Get DRAM size from ATFSergey Temerkhanov
Change the dram_init() function on ThunderX to query ATF services for the real installed DRAM size Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
2016-01-19armv8: cavium: Add an implementation of ATF calling functionsSergey Temerkhanov
This commit adds functions issuing calls to the product-specific ATF services Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
2016-01-19armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov
This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19armv8: cavium: Add the device tree for ThunderXSergey Temerkhanov
This commit adds the FDT for the ThunderX family of SoCs Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-19armv8: Add psci.h from the Linux kernelSergey Temerkhanov
This commit adds the psci.h header file from Linux kernel which contains definitions related to the PSCI interface provided by firmware Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
2016-01-19armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructureSergey Temerkhanov
This commit adds functions issuing calls to secure monitor or hypervisore. This allows using services such as Power State Coordination Interface (PSCI) provided by firmware, e.g. ARM Trusted Firmware (ATF) The SMC call can destroy all registers declared temporary by the calling conventions. The clobber list is "x0..x17" because of this Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2016-01-19armv8: New MMU setup code allowing to use 48+ bits PA/VASergey Temerkhanov
This patch adds code which sets up 2-level page tables on ARM64 thus extending available VA space. CPUs implementing 64k translation granule are able to use direct PA-VA mapping of the whole 48 bit address space. It also adds the ability to reset the SCTRL register at the very beginning of execution to avoid interference from stale mappings set up by early firmware/loaders/etc. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
2016-01-19armv8: Add read_mpidr() functionSergey Temerkhanov
This patch adds the read_mpidr() function which returns the MPIDR_EL1 register value Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-19arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for ↵Sergey Temerkhanov
early debug output This patch adds Kconfig entries to facilitate usage of pl01x as a debug UART. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-01-19arm: serial: Add debug UART capability to the pl01x driverSergey Temerkhanov
This patch adds an ability to use pl01x as a debug UART. It must be configured like other types of debug UARTs Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Update for _debug_uart_init change] Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini
2016-01-19x86: quark: Fix boot breakageBin Meng
With driver model timer conversion, quark based board does not boot any more as mdelay() is called during quark_pcie_early_init() which is before driver model gets initialized. Fix this breakage. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-19power: regulator: max77686: Don't use switch() on boolsTom Rini
With gcc-5.3 we get a warning for using switch() on a bool type. Rewrite these sections as if/else and update the one section that was using 1/0 instead of true/false. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>
2016-01-19spi: rk_spi: Fix debug format warningTom Rini
We need to use %lx not %x to describe a fdt_addr_t Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19pci_rom.c: Fix may be used uninitialized warningTom Rini
With gcc-5.x we get: drivers/pci/pci_rom.c: In function 'dm_pci_run_vga_bios': drivers/pci/pci_rom.c:352:3: warning: 'ram' may be used uninitialized in this function [-Wmaybe-uninitialized] While unconvinced that this can happen in practice (if we malloc we set alloced to true, it will be false otherwise), silence the compiler. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-19Add more SPDX-License-Identifier tagsTom Rini
In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19scripts/Makefile* Add SPDX-License-Identifier tagTom Rini
A general best practice for SPDX is that Makefiles should have an identifier, add these as everything else is currently covered. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19gunzip.c: Only include gzwrite on CONFIG_CMD_UNZIPTom Rini
Only when we have CONFIG_CMD_UNZIP enabled do we have the 'gzwrite' command. While this command should be separated from CONFIG_CMD_UNZIP we should also only include the write portion of the gz code in that case as well. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19axm/taurus: Enable tiny printf in SPLTom Rini
Both of these boards are very close to their limit and with some toolchains such as gcc 5.x are too large. Switch to tiny printf to reclaim some size. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19vsprintf.c: Always enable CONFIG_SYS_VSNPRINTFTom Rini
Enabling this function always removes some class of string saftey issues. The size change here in general is about 400 bytes and this seems a reasonable trade-off. Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19image: fix getenv_bootm_size() functionMasahiro Yamada
Currently, this function returns wrong size if "bootm_low" is defined, but "bootm_size" is not. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-16Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
2016-01-16MIPS: implement bit manipulating I/O accessorsDaniel Schwierzeck
Add support for functions clrbits_X(), setbits_X() and clrsetbits_X() on MIPS. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: fix SPDX license identifier in remaining arch header filesDaniel Schwierzeck
Add a SPDX license identifier to MIPS header files where it is still missing. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: sync processor and register definitions with linux-4.4Daniel Schwierzeck
Update definitions for processor, registers as well as assemby macros. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: sync I/O related header files with linux-4.4Daniel Schwierzeck
Mainly sync asm/io.h to get a working ioremap() implementation as well as the full set of I/O accessors. Pull in additional header files to make this work. Furthermore port over the directory 'arch/mips/include/asm/mach-generic/' with contains default definitions for I/O and memory spaces and default implementations for mapping those spaces. All files in that directory can be overwritten by a SoC/machine. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16net: pcnet: refactor mapping of virtual addresses to physical onesDaniel Schwierzeck
pci_virt_to_mem() uses virt_to_phys() to get the physical address. But pci_virt_to_mem() is also called with uncached addresses which is wrong according to the documentation of virt_to_phys(). Refactor the PCI_TO_MEM() macro to optionally map an uncached address back to a cached one before calling pci_virt_to_mem(). Currently pcnet works because virt_to_phys() is incorrectly implemented on MIPS. With the upcoming asm header file update for MIPS, the virt_to_phys() implementation will be fixed. Thus this patch is needed to keep pcnet working on MIPS Malta board. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: kconfig: add option for MIPS_L1_CACHE_SHIFTDaniel Schwierzeck
Add Kconfig symbol for L1 cache shift like the kernel does. The value of CONFIG_SYS_CACHELINE_SIZE is not a reliable source for ARCH_DMA_MINALIGN anymore, because it is optional on MIPS. If CONFIG_SYS_CACHELINE_SIZE is not defined by a board, the cache sizes are automatically detected and ARCH_DMA_MINALIGN would be set to 128 Bytes. The default value for CONFIG_MIPS_L1_CACHE_SHIFT is 5 which corresponds to 32 Bytes. All current MIPS boards already used that value. While on it, fix the Malta board to use a value of 6 like the kernel port does. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: vct: fix I/O accessor callsDaniel Schwierzeck
Use void pointers as address argument for readl( and writel()). This is required for the upcoming MIPS asm header file and I/O accessor update. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: malta: fix IO accessor callDaniel Schwierzeck
Use void pointer as address argument for readl(). This is required for the upcoming MIPS asm header file and I/O accessor update. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: malta: do not pull in target header files in config.hDaniel Schwierzeck
config.h is used in target and host code and therefore should not pull in target header files to avoid compile errors. This change is also required for the MIPS header file sync done in follow-up patches. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: Kconfig: optimize gcc -march and -mtune setupDaniel Schwierzeck
Move setup of -march to arch/mips/Makefile and follow the design on ARM. Also add a possibility to chose specific CPU tune options. Signed-off-by: Wills Wang <wills.wang@live.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: au1x00: move SoC header files to arch/mips/mach-au1x00/include/mach/Daniel Schwierzeck
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: Kconfig: refactor machine setupDaniel Schwierzeck
Refactor machine setup like it is done on ARM. While on it, also support "include <mach/file.h" for machine specific header files. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: add initial infrastructure for device-tree filesDaniel Schwierzeck
Prepare sub-folder for device-tree files. Make support for device-tree on MIPS available in Kbuild/Kconfig. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-01-16MIPS: do not build position-independent executables for SPLDaniel Schwierzeck
SPL binaries are usually linked to a fixed address in SRAM. Furthermore SPL binaries do not need to relocate itself. Thus do not build them as position-independent binaries which helps to largely reduce the size of SPL binaries. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: create .text sub-sections for assembler functionsDaniel Schwierzeck
Put all functions coded in assembly in sub-sections of section .text. This allows the linker to garbage collect unused assembly functions too. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: fix annotation of _start and relocate_codeDaniel Schwierzeck
Correctly annotate _start and relocate_code as functions to produce more readable disassembly code generated by objdump. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-01-16MIPS: add asm/gpio.h to fix compilation error with CONFIG_CMD_GPIO.Purna Chandra Mandal
With CONFIG_CMD_GPIO compilation reports error. common/cmd_gpio.c:13:22: fatal error: asm/gpio.h: No such file or directory #include <asm/gpio.h> ^ Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Chin Liang See <clsee@altera.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-16Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2016-01-16socfpga: Modify qts-filter args to allow input for bsp generated files and ↵Dalon Westergreen
quartus project directories The hps_isw_handoff and bsp/generated folders are typically not in the same path.This patch adds support for specifying the different input directories for the bsp and quartus projects. Signed-off-by: Dalon Westergreen <dwesterg@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Chin Liang See <clsee@altera.com>
2016-01-16arm: socfpga: set the fpga global bit to disable HPS to FPGA signalsDinh Nguyen
We should be setting the FPGA Interface Group global bit that will correctly disable all interfaces between the FPGA and HPS. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2016-01-16ddr: altera: Init the rule ID in debug codeMarek Vasut
Init the rule ID, otherwise the debug code will always dump the protection settings entry 0. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Dinh Nguyen <dinh.linux@gmail.com>
2016-01-16common: usb: fix checking conditionPeng Fan
We support max USB_MAXENDPOINTS, so need to use "epno >= USB_MAXENDPOINTS", but not "epno > USB_MAXENDPOINTS". If use ">", we may exceeds the array of if_desc->ep_desc. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Marek Vasut <marex@denx.de> Cc: Paul Kocialkowski <contact@paulk.fr> Cc: "Stefan Brüns" <stefan.bruens@rwth-aachen.de> Cc: Vincent Palatin <vpalatin@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-26 23:51:31 +0000