summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-18pmic: dm: Add support for MC34708 for PMIC DMLukasz Majewski
This patch adds support for MC34708 PMIC, to be used with driver model (DM). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes ↵Lukasz Majewski
transmissions This commit provides support for transmissions larger than 1 byte for PMIC devices used with DM (e.g. MC34708 from NXP). Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: Add support for setting transmission length in uclass private dataLukasz Majewski
The struct uc_pmic_priv's trans_len field stores the number of types to be transmitted per PMIC transfer. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: fsl: Define number of bytes sent at once by MC34708 PMICLukasz Majewski
This patch adds definition of the number of bytes sent at once by the MC34708 PMIC. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18pmic: fsl: Provide some more definitions for MC34708 PMICLukasz Majewski
This commit adds some more defines for MC34708 PMIC. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-18configs: imx6dl-mamoj: Enable HABJagan Teki
Enable Secure boot(HAB) for BTicino Mamoj board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18configs: imx6dl-mamoj: Add Falcon mode supportJagan Teki
Add Falcon mode support to boot Linux directly after SPL. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18configs: imx6dl-mamoj: Add DFU supportJagan Teki
Add DFU support for BTicino Mamoj board and update the same steps in README. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18configs: imx6dl_mamoj: Enable fastboot and umsJagan Teki
Enable fastboot and ums for host to interact eMMC on Mamoj board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6DL: mamoj: Add PFUZE100 supportJagan Teki
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support for it through DM_PMIC dt definition. pmic log: Reviewed-by: Stefano Babic <sbabic@denx.de> ======== => pmic list | Name | Parent name | Parent uclass @ seq | pfuze100@08 | i2c@021f8000 | i2c @ 3 => pmic dev pfuze100@08 dev: 0 @ pfuze100@08 => pmic dump Dump pmic: pfuze100@08 registers 0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81 0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00 0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b 0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08 0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00 0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10 0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6DL: mamoj: Add I2C supportJagan Teki
i.MX6DL Mamoj has i2c3 and i2c4 buses, add support through DM_I2C with dt definition. i2c log: Reviewed-by: Stefano Babic <sbabic@denx.de> ======= => i2c bus Bus 2: i2c@021a8000 Bus 3: i2c@021f8000 => i2c dev 2 Setting bus to 2 => i2c speed 400000 Setting bus speed to 400000 Hz => i2c probe Valid chip addresses: 20 51 53 => i2c md 53 0xff 00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ => i2c md 51 0xff 00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53 ..@P.CFRB......S => i2c dev 3 Setting bus to 3 => i2c speed 100000 Setting bus speed to 100000 Hz => i2c probe Valid chip addresses: 08 40 48 4B => i2c md 08 0xff 00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
2018-05-18i.MX6: board: Add BTicino i.MX6DL Mamoj initial supportJagan Teki
Add initial support for i.MX6DL BTicino Mamoj board. Mamoh board added: - SPL - SPL_DM - SPL_OF_CONTROL - DM for U-Boot proper - OF_CONTROL for U-Boot proper - eMMC - FEC - Boot from eMMC - Boot from USB SDP Signed-off-by: Simone CIANNI <simone.cianni@bticino.it> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: i.MX6: dts: Build dtb based on SOC typeJagan Teki
Build dtb's based on SOC type instead building arch type. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6UL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: imx6ul-isiot: Move usdhc2 into dtsiJagan Teki
Move usdhc2 node along with pinctrl to imx6ul-isiot.dts from imx6ul-isiot-emmc.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-18ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-splJagan Teki
u-boot,dm-spl property is specific to U-Boot, so move it into *u-boot.dtsi files for relevant i.MX6QDL files. This make syncing Linux dts files straight forward. Also update the MAINTAINERS file for dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-05-17imx6: sabrelite: update defconfig to use distro defaultsGuillaume GARDET
Boot tested with boot.scr script and EFI/Grub2 on mmc0 and mmc1 slots on sabrelite board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Gary Bisson <gary.bisson@boundarydevices.com>
2018-05-17imx6: Convert sabrelite and nitrogen6x boards to distro boot supportGuillaume GARDET
Boot tested on sabrelite board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Denis Pynkin <denis.pynkin@collabora.com>
2018-05-17Merge git://www.denx.de/git/u-boot-marvellTom Rini
2018-05-17net: MVGBE don't automatically select PHYLIBChris Packham
When Kconfig support was added for MVGBE it included automatically selected PHYLIB support. But MVGBE does not need PHYLIB it will build fine without it. Commit ed52ea507f12 ("net: add Kconfig for MVGBE") should have been a no-op in terms of build size but because of the selecting PHYLIB the openrd configs increased in size. Remove the automatic selection of PHYLIB, boards that need it will have already enabled it in their config header file. Fixes: commit ed52ea507f12 ("net: add Kconfig for MVGBE") Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for sheevaplugChris Packham
Import the dts files from Linux 4.17 and enable device tree control in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for pogo_e02Chris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for openrdChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for nas220Chris Packham
Import the dts file from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for iconnectChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for ib62x0Chris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for guruplugChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for goflexhomeChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for dockstarChris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: kirkwood: Add device-tree for dns325Chris Packham
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17ARM: add devicetree files for kirkwood SoCChris Packham
These files are taken verbatim from the Linux kernel 4.17 Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-17dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrlLukasz Majewski
The SION pin must be set for proper operation of I2C when DM is enabled. When legacy I2C is used, this bit is set implicitly in the u-boot code: arch/arm/include/asm/arch-mx5/iomux-mx53.h:92: MX53_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x368, 0x040, 4 | IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL), The Linux kernel uses similar approach with: arch/arm/boot/dts/imx53-tqma53.dtsi:182: MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000 After applying this patch it is possible to have the I2C working with DM on imx53 devices: MX53_PAD_KEY_ROW3__I2C2_SDA (0x1ee | IMX_PAD_SION) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-17dts: imx53: Add gpio and i2c nodes to imx53.dtsi fileLukasz Majewski
Those DTS nodes has been ported from Linux kernel (v4.16) Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-05-17ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfigSebastian Reichel
CONFIG_ENV_IS_IN_MMC must be declared in defconfig to properly support "env save". Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17mx6: remove duplicated BOUNCE_BUFFER definesPeter Robinson
The mx6_common.h file already defines BOUNCE_BUFFER so no need to definit it again in specific configs. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2018-05-17mx6: Select CONFIG_MP with MX6_SMPPeter Robinson
It makes sense to select the MP multi processor option at the same time we select the other SMP options needed for SMP capable i.MX6 SoCs. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17mx7: remove empty ifndef statementPeter Robinson
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17mx6 common: remove dangling commentPeter Robinson
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-05-17mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.Magnus Lilja
Also remove the #ifdef's from clock.h since the Kconfig values defaults the to old default values in clock.h. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.Magnus Lilja
Move CONFIG_MX31 from mx31pdk.h to mx31pdk_defconfig and introduce necessary Kconfig changes as well. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-05-17board: ge: bx50v3: remove redundant targetsIan Ray
This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3. The boards are identified automatically at runtime. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: configure video arguments using VPDIan Ray
Configure video arguments at run-time instead of at compile-time. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: use VPD instead of compile-time checksIan Ray
B{46}50v3s have an internal LCD that needs to be configured, in comparison with B850v3 which has only external displays. Use VPD instead of `CONFIG_TARGET_GE_B{4,6,8}50V3' compile-time checks to correct initialize video based on the monitor type. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: detect the monitor type by reading VPD earlierNandor Han
Move the VPD reading earlier in order to establish the monitor type as soon as possible. The configuration of the specific environment variables needs to be done later after the environment is configured. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: fix display support for b{46}50v3Ian Ray
Enable Video PLL to fix non-working display support for Bx50v3 internal displays. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: unify two switch statementsNandor Han
Simplify process_vpd() by unifying the switch statements handling product specific configurations. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: rename detect_baseboard functionIan Ray
The detect_baseboard() function actually determines whether there is an internal LCD panel or not. Rename for clarity. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-17board: ge: bx50v3: add winbond SPI NOR supportIan Ray
Add winbond SPI NOR support, which is being used by newer hardware. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2018-05-16Merge git://git.denx.de/u-boot-dmTom Rini
2018-05-16ARM: re-enable MVGBE for edminiv2Chris Packham
This was unintentionally disabled when moving MVGBE to Kconfig. Fixes: commit ed52ea507f12 ("net: add Kconfig for MVGBE") Signed-off-by: Chris Packham <judge.packham@gmail.com>
generated by cgit (git 2.34.1) at 2025-02-14 12:53:25 +0000