summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-08watchdog: Move watchdog_dev to data section (BSS may not be cleared)Stefan Roese
This patch moves all instances of static "watchdog_dev" declarations to the "data" section. This may be needed, as the BSS may not be cleared in the early U-Boot phase, where watchdog_reset() is already beeing called. This may result in incorrect pointer access, as the check to "!watchdog_dev" in watchdog_reset() may not be true and the function may continue to run. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Marek Behún" <marek.behun@nic.cz> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100) Reviewed-by: Michal Simek <michal.simek@xilinx.com>
2019-04-08riscv: dts: fix CONFIG_DEFAULT_DEVICE_TREE failureRick Chen
It occurs since commit 27cb7300ffda ("Ensure device tree DTS is compiled"). More details can refer to 89c2b5c02049aea746b1edee0b4e1d8519dec2f4 ARM: fix arch/arm/dts/Makefile Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: ae350: enable SMPRick Chen
Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: dts: ae350 support SMPRick Chen
Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: ax25: Andes specific cache shall only support in M-modeRick Chen
Limit the cache configuration only can be supported in M mode. It can not be manipulated in S mode. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: ax25: Add platform-specific Kconfig optionsRick Chen
Add ax25 RISC-V platform-specific Kconfig options, to include CPU and timer drivers. Also disable ATCPIT100 SoC timer and replace by PLMT. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: Add a SYSCON driver for Andestech's PLMTRick Chen
The platform-Level Machine Timer (PLMT) block holds memory-mapped mtime register associated with timer tick. This driver implements the riscv_get_time() which is required by the generic RISC-V timer driver. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: Add a SYSCON driver for Andestech's PLICRick Chen
The Platform-Level Interrupt Controller (PLIC) block holds memory-mapped claim and pending registers associated with software interrupt. It is required for handling IPI. Signed-off-by: Rick Chen <rick@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-04-08riscv: qemu: enable SMPLukas Auer
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08riscv: fu540: enable SMPLukas Auer
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08riscv: hang if relocation of secondary harts failsLukas Auer
Print an error message and hang if smp_call_function() returns an error, indicating that relocation of the secondary harts has failed. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-04-08riscv: do not rely on hart ID passed by previous boot stageLukas Auer
RISC-V U-Boot expects the hart ID to be passed to it via register a0 by the previous boot stage. Machine mode firmware such as BBL and OpenSBI do this when starting their payload (U-Boot) in supervisor mode. If U-Boot is running in machine mode, this task must be handled by the boot ROM. Explicitly populate register a0 with the hart ID from the mhartid CSR to avoid possible problems on RISC-V processors with a boot ROM that does not handle this task. Suggested-by: Rick Chen <rick@andestech.com> Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com>
2019-04-08riscv: boot images passed to bootm on all hartsLukas Auer
Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08riscv: add support for multi-hart systemsLukas Auer
On RISC-V, all harts boot independently. To be able to run on a multi-hart system, U-Boot must be extended with the functionality to manage all harts in the system. All harts entering U-Boot are registered in the available_harts mask stored in global data. A hart lottery system as used in the Linux kernel selects the hart U-Boot runs on. All other harts are halted. U-Boot can delegate functions to them using smp_call_function(). Every hart has a valid pointer to the global data structure and a 8KiB stack by default. The stack size is set with CONFIG_STACK_SIZE_SHIFT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08riscv: save hart ID in register tp instead of s0Lukas Auer
The hart ID passed by the previous boot stage is currently stored in register s0. If we divert the control flow inside a function, which is required as part of multi-hart support, the function epilog may not be called, clobbering register s0. Save the hart ID in the unallocatable register tp instead to protect the hart ID. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-04-08riscv: delay initialization of caches and debug UARTLukas Auer
Move the initialization of the caches and the debug UART until after board_init_f_init_reserve. This is in preparation for SMP support, where code prior to this point will be executed by all harts. This ensures that initialization will only be performed once on the main hart running U-Boot. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08riscv: implement IPI platform functions using SBILukas Auer
The supervisor binary interface (SBI) provides the necessary functions to implement the platform IPI functions riscv_send_ipi() and riscv_clear_ipi(). Use it to implement them. This adds support for inter-processor interrupts (IPIs) on RISC-V CPUs running in supervisor mode. Support for machine mode is already available for CPUs that include the SiFive CLINT. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-08riscv: import the supervisor binary interface header fileLukas Auer
Import the supervisor binary interface (SBI) header file from Linux (arch/riscv/include/asm/sbi.h). The last change to it was in commit 6d60b6ee0c97 ("RISC-V: Device, timer, IRQs, and the SBI"). Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Atish Patra <atish.patra@wdc.com>
2019-04-08riscv: add infrastructure for calling functions on other hartsLukas Auer
Harts on RISC-V boot independently, U-Boot is responsible for managing them. Functions are called on other harts with smp_call_function(), which sends inter-processor interrupts (IPIs) to all other available harts. Available harts are those marked as available in the device tree and present in the available_harts mask stored in global data. The available_harts mask is used to register all harts that have entered U-Boot. Functions are specified with their address and two function arguments (argument 2 and 3). The first function argument is always the hart ID of the hart calling the function. On the other harts, the IPI interrupt handler handle_ipi() must be called on software interrupts to handle the request and call the specified function. Functions are stored in the ipi_data data structure. Every hart has its own data structure in global data. While this is not required at the moment (all harts are expected to boot Linux), this does allow future expansion, where other harts may be used for monitoring or other tasks. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-04-07net: phy: implement fallback mechanism for negative phy adressesHannes Schmelzer
Negative phy-addresses can occour if the caller function was not able to determine a valid phy address (from device-tree for example). In this case we catch this here and search for ANY phy device on the given mdio- bus. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Lukasz Majewski <lukma@denx.de>
2019-04-07efi_loader: correct CTRL-A - CTRL-Z console inputHeinrich Schuchardt
In the extended text input protocol CTRL-A - CTRL-Z have to be signaled as Unicode characters a-z or A-Z depending on the shift state and not as 0x01 to 0x1a. Update Python unit test. This patch is required for using the EFI shell `edit` command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: enable file SetInfo()Heinrich Schuchardt
EFI shell command edit uses the SetInfo() methods to unset the read only attribute of the file to be edited. So let efi_file_setinfo() return success in this case. Return an error if the function is called for to rename or resize a file as we do not support this yet. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: correct file creationHeinrich Schuchardt
The EFI shell expects that after opening a file with EFI_FILE_MODE_CREATE GetInfo() succeeds. Up to now we do not actually create the file when method Open() of the EFI_FILE_PROTOCOL is called. If method Open() of the EFI_FILE_PROTOCOL is called with EFI_FILE_MODE_CREATE and the file does not yet exist, call fs_write() with a buffer size of zero to actually create the file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: debug output file handle in efi_file_open()Heinrich Schuchardt
For debugging it is helpful to know the address of the file handle created by the Open() method of the EFI file protocol. So let's write it with EFI_PRINT(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: boottime: export efi_[un]load_image()AKASHI Takahiro
Those two functions will be used later to re-implement do_bootefi_exec(). Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: boottime: add loaded image device path protocol to image handleAKASHI Takahiro
To meet UEFI spec v2.7a section 9.2, we should add EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL to image handle, instead of EFI_DEVICE_PATH_PROTOCOL. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: variables PlatformLang and PlatformLangCodesHeinrich Schuchardt
Since TianoCore EDK2 commit d65f2cea36d1 ("ShellPkg/CommandLib: Locate proper UnicodeCollation instance") in edk2 the UEFI Shell crashes if EFI variable PlatformLang is not defined. As this variable is anyway prescribed in the UEFI 2.7 spec let's define it to L"en-US". Use the same value for PlatformLangCodes that defines the list of all supported languages. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: EFI_PRINT instead of debug for memory servicesHeinrich Schuchardt
For debug messages inside EFI API functions we should use the EFI_PRINT macro which gives us well aligned output like: EFI: Entry efi_allocate_pool_ext(4, 14, 000000007edd7718) EFI: efi_add_memory_map: 0x7dcfa000 0x1 4 yes EFI: Exit: efi_allocate_pool_ext: 0 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: EFI_PRINT instead of debug for variable servicesHeinrich Schuchardt
For debug messages inside EFI API functions we should use the EFI_PRINT macro which gives us well aligned output like: EFI: Entry efi_get_variable("PlatformLang" ...) EFI: get 'efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_PlatformLang' EFI: Exit: efi_get_variable: 14 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: parameter checks in StartImage and Exit()Heinrich Schuchardt
Add parameter checks in the StartImage() and Exit() boottime services: - check that the image handle is valid and has the loaded image protocol installed - in StartImage() record the current image - in Exit() check that the image is the current image Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: rearrange boottime service functionsHeinrich Schuchardt
To avoid forward declarations move efi_start_image() and efi_exit() down. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: sanity checks when freeing memoryHeinrich Schuchardt
Use a checksum to validate that efi_free_pool() is only called for memory allocated by efi_allocated_pool(). Add a plausibility check to efi_free_pages() checking that the address passed is page aligned. Update related function comments to match Sphinx style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_selftest: check image_base, image_sizeHeinrich Schuchardt
In efi_selftest_start_image_exit.c test the image_base and image_size are correctly set in the loaded image protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: set image_base and image_size to correct valuesAKASHI Takahiro
Currently, image's image_base points to an address where the image was temporarily uploaded for further loading. Since efi_loader relocates the image to final destination, image_base and image_size should reflect that. This bug was detected in UEFI SCT, "Loaded Image Protocol Test - test 2," which shows that 'Unload' function doesn't fit into a range suggested by image_base and image_size. TestCase/UEFI/EFI/Protocol/LoadedImage/BlackBoxTest/ LoadedImageBBTestMain.c:1002 Changes in this patch also includes: * reverts a patch, "efi_loader: save image relocation address and size" since newly added fields are no longer needed. * copy PE headers as well since those information will be needed for module loading, in particular, at gurb. (This bug was reported by Heinrich.) Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Rebase patch. Remove unused fields from struct efi_loaded_image_obj. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: bootmgr: support BootNext and BootCurrent variable behaviorAKASHI Takahiro
See UEFI v2.7, section 3.1.2 for details of the specification. With efidebug command, you can run any EFI boot option as follows: => efi boot add 1 SHELL ... => efi boot add 2 HELLO ... => efi boot order 1 2 => efi bootmgr (starting SHELL ...) => efi boot next 2 => efi bootmgr (starting HELLO ...) => env print -e <snip ...> BootCurrent: {boot,run}(blob) 00000000: 02 00 .. BootOrder: {boot,run}(blob) 00000000: 01 00 02 00 .... Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-07efi_loader: release file buffer after loading imageHeinrich Schuchardt
Commit 0e18f584de59 ("efi_loader: LoadImage: always allocate new pages") ensured that whether we load an image from file or from memory we end up with the same number of newly allocated buffers. But essentially we ended up with one buffer too many in both cases: efi_load_pe() copies and rebases the UEFI image. We do not need the buffer with the file contents afterwards. Fixes: 0e18f584de59 ("efi_loader: LoadImage: always allocate new pages") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-04-05Merge tag 'u-boot-imx-20190405' of git://git.denx.de/u-boot-imxTom Rini
Fixes for 2019.04 - fix bashism for MX8 - fix ethernet for MX53 - fix docs for i.MX8
2019-04-03Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Documentation fix
2019-04-03Merge branch '2019-04-03-master-imports'Tom Rini
- Important Khadas VIM2 fix - Build fix for macOS Mojave - Build fix for gcc-4.7 for host tools.
2019-04-03tools/Makefile: build host tools with -std=gnu99Thomas Petazzoni
Parts of the code are using C99 constructs (such as variables declared inside loops), but also GNU extensions (such as typeof), so using -std=gnu99 is necessary to build with older versions of gcc that don't default to building with gnu99. It fixes the following build failure: ./tools/../lib/crc16.c: In function "crc16_ccitt": ./tools/../lib/crc16.c:70:2: error: "for" loop initial declarations are only allowed in C99 mode for (int i = 0; i < len; i++) ^ ./tools/../lib/crc16.c:70:2: note: use option -std=c99 or -std=gnu99 to compile your code when building the host tools with gcc 4.7. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2019-04-03fix compile error on macOS Mojave默默
2019-04-03configs: khadas_vim2: Fix defconfigNeil Armstrong
The Khadas VIM2 defconfig was missing the USB PHY config and two other misc configs to setup dram banks and call misc_init_r. Align it on the other Amlogic SoC based boards defconfig. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-03phy: Also allow MESON_GXM for MESON_GXL_USB_PHYNeil Armstrong
The MESON_GXL_USB_PHY is also used on the Amlogic Meson GXM SoCs. Fixes: 2960e27e38 ("phy: Add Amlogic Meson USB2 & USB3 Generic PHY drivers") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-02travis-ci: fix at91 missing boardsEugen Hristev
Fix missing at91 boards and split the at91 in two categories: at91 arm v7 at91 arm926esj which are the two main cores for the at91 architecture. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-02DTS: Fix ETH PHY reset on HSC|DDC boards (imx53)Lukasz Majewski
After the commit: "eth: dm: fec: Add gpio phy reset binding" SHA1: efd0b791069af93e9d439a70d1fe2ae8994dbbfa The FEC ETH driver switched to PHY GPIO reset performed with data defined in DTS. For the HSC|DDC boards the GPIO reset signal is active low and hence the wrong DTS description must be changed (otherwise the reset for ETH is not properly setup). Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02cosmetic: Remove not needed string from kp_imx53.h configLukasz Majewski
Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02cosmetic: config: Remove empty #ifdefsLukasz Majewski
After running tools/moveconfig.py it turned out that for various boards there are an empty #ifdef statements. Remove them to clean u-boot source code. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2019-04-02doc: Fix outdated ohci board hook documentationKrzysztof Kozlowski
The ohci driver calls board_usb_init(), not usb_board_init(). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2019-04-02imx8mq_evk: README: Make the underline marker fill the whole sentenceFabio Estevam
Let the underline marker "=" fill the whole sentence for better readability. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2019-04-02imx8mq_evk: README: Fix a typo in the destination pathFabio Estevam
The DDR firmware binaries should be copied to '$(srctree)', so fix a typo. Signed-off-by: Fabio Estevam <festevam@gmail.com>