summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-30pci: Avoid auto-config when chain loadingSimon Glass
When U-Boot is not the first-stage bootloader we don't want to re-configure the PCI devices, since this has already been done. Add a check to avoid this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30x86: cpu: Skip init code when chain loadingSimon Glass
When U-Boot is not the first-stage bootloader the interrupt and cache init must be skipped, as well as init for various peripherals. Update the code to add checks for this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30x86: apl: Skip init code when chain loadingSimon Glass
When U-Boot is not the first-stage bootloader the FSP-S init must be skipped. Update it to add a check. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30x86: fsp: Allow skipping init code when chain loadingSimon Glass
It is useful to be able to boot the same x86 image on a device with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like. When U-Boot is not the first-stage bootloader much of this code is not needed and can break booting. Add checks for this to the FSP code. Rather than checking for the amount of available SDRAM, just use 1GB in this situation, which should be safe. Using 2GB may run into a memory hole on some SoCs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30acpi: Add an acpi commandSimon Glass
It is useful to dump ACPI tables in U-Boot to see what has been generated. Add a command to handle this. To allow the command to find the tables, add a position into the global data. Support subcommands to list and dump the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Move the xsdt pointer to acpi_ctxSimon Glass
Put this in the context along with the other important pointers. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Put table-setup code in its own functionSimon Glass
We always write three basic tables to ACPI at the start. Move this into its own function, along with acpi_fill_header(), so we can write a test for this code. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-30acpi: Move acpi_add_table() to generic codeSimon Glass
Move this code to a generic location so that we can test it with sandbox. This requires adding a few new fields to acpi_ctx, so drop the local variables used in the original code. Also use mapmem to avoid pointer-to-address casts which don't work on sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Drop code for missing XSDT from acpi_write_rsdp()Simon Glass
We don't actually support tables without an XSDT so we can drop this dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30x86: Allow devices to write ACPI tablesSimon Glass
Call the new core function to permit devices to write their own ACPI tables. These tables will appear after all other tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Convert part of acpi_table to use acpi_ctxSimon Glass
The current code uses an address but a pointer would result in fewer casts. Also it repeats the alignment code in a lot of places so this would be better done in a helper function. Update write_acpi_tables() to make use of the new acpi_ctx structure, adding a few helpers to clean things up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Add a method to write tables for a deviceSimon Glass
A device may want to write out ACPI tables to describe itself to Linux. Add a method to permit this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-04-30acpi: Add a binding for ACPI settings in the device treeSimon Glass
Devices need to report various identifiers in the ACPI tables. Rather than hard-coding these in drivers it is typically better to put them in the device tree. Add a binding file to describe this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-30x86: cbfs: Drop unwanted declarationSimon Glass
The intention here is add a forward declaration, not actually declare a variable. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-30efi_loader: fix 'efidebug bootorder'Heinrich Schuchardt
* don't copy GUIDs for no reason * shorten print format strings by using variable names * don't use the run-time table to access exported functions * check the result of malloc() (fixes Coverity CID 300331) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: efidebug, avoid illegal memory accessHeinrich Schuchardt
For EFI_PERSISTENT_MEMORY_TYPE the 'efidebug memmap' command produces an illegal memory access. * Add the missing descriptive string for EFI_PERSISTENT_MEMORY_TYPE. * Replace the check for EFI_MAX_MEMORY_TYPE by the ARRAY_SIZE() macro. Reported-by: Coverity (CID 300336) Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: fix 'efidebug boot dump'Heinrich Schuchardt
* Do not recreate a variable name that we already have as u16 string. * Check the return value of malloc() * EFI_NOT_FOUND cannot occur for a variable name returned by GetNextVariableName(). Remove a print statement. * Don't copy a GUID for no reason. * Don't use the run-time service table to call exported functions. * Don't pass NULL to show_efi_boot_opt_data() (fixes Coverity CID 300338). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30MAINTAINERS: assign test/py/tests/test_efi*/ to EFI PAYLOADHeinrich Schuchardt
Some UEFI related files are not assigned currently. Add them to the EFI PAYLOAD area. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: remove CONFIG_EFI_SECURE_BOOT in efi_loader.hAKASHI Takahiro
The guard doesn't make any difference, so remove it. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30doc/efi: rework secure boot descriptionHeinrich Schuchardt
Ensure a uniform formatting. Some rephrasing. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: identify EFI system partitionHeinrich Schuchardt
In subsequent patches UEFI variables shalled be stored on the EFI system partition. Hence we need to identify the EFI system partition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30part: detect EFI system partitionHeinrich Schuchardt
Up to now for MBR and GPT partitions the info field 'bootable' was set to 1 if either the partition was an EFI system partition or the bootable flag was set. Turn info field 'bootable' into a bit mask with separate bits for bootable and EFI system partition. This will allow us to identify the EFI system partition in the UEFI sub-system. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30efi_loader: remove superfluous NULL check in bootefi.cHeinrich Schuchardt
efi_free_pool() and efi_delete_handle() both check if their argument is NULL. The caller should not duplicate this check. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-30test/py: fix test_efi_secboot/conftest.pyHeinrich Schuchardt
If udisksctl is present test/py/tests/test_efi_secboot/conftest.py fails because the disk image is never mounted. Normal users can only mount fuse file systems. Unfortunately fusefat is still in an experimental state and seems not to work here correctly. So as we have to be root or use the sudo command anyway delete all coding referring to udisksctl. -- We should not use mount point /mnt as this directory or one of its sub-directories might already be in use as active mount points. Instead create a new directory in the build root as mount point. -- Remove debug print statements that have been commented out. print without parentheses is anyway invalid in Python 3. And pytest anyway filters out the output if there is no exception reported. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-29Merge https://gitlab.denx.de/u-boot/custodians/u-boot-shTom Rini
- rmobile gen2/gen3 DTS sync and defconfig consolidation
2020-04-29configs: ls2088ardb: Correct DEFAULT_DEVICE_TREE valueKuldeep Singh
LS2088A-RDB has CONFIG_DEFAULT_DEVICE_TREE value correctly set as "fsl-ls2088a-rdb-qspi" for QSPI secure/non-secure boot and TFA non-secure boot mode. Fix the value for TFA secure boot mode. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: enable DM_ETH support for LS1046ARDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the LS1046ARDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: enable DM_ETH support for LS1043ARDBMadalin Bucur
Enable DM_ETH on all the defconfigs for the LS1043ARDB board. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: add DM ETH supportMadalin Bucur
Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: add DM MDIO supportMadalin Bucur
Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: separate receive buffer free codeMadalin Bucur
Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: change init_phy() paramMadalin Bucur
Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1046ARDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1046ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1046AMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the LS1046A SoC. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1043ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1043AMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the LS1043A SoC. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodesMadalin Bucur
Add the QorIQ DPAA Frame Manager v3 device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1012afrwy: drop env qspi_bootcmdBiwen Li
Drop useless environment variable installer and qspi_bootcmd for ls1012afrwy. Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from the nor flash, then drop it. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1046aqds: support distro bootBiwen Li
Add support of distro boot for ls1046aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1028aqds: add lpuart configYuantian Tang
Add lpuart config to enable lpuart feature. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>. Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29armv8: ls1028aqds: add lpuart dts supportYuantian Tang
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that it can be used as common device tree for lpuart and duart. Add lpuart device tree and duart device tree respectively for qds which are used with duart and lpuart console. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1028a: add lpuart nodesYuantian Tang
Add lpuart nodes to enable lpuart feature Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: freescale: ls1028a: mux changes for lpuartYuantian Tang
mux changes in board file to enable lpuart1 and macro define for lpuart1 used for mux changes in board configuation register 13 Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: lx2160ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls2088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (8 x VSC8514, AQR105). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (4 x AQR405 and 4 x CS4340). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs and the 2 AQR107 PHYs. Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-24 05:52:36 +0000