summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-04ARM: meson: add unique MAC address generationNeil Armstrong
Add support for generating an unique MAC address using the SoC internal serial number from the Secure Monitor interface. The algorithm generates an unicast locally administered 6bytes minus 2bits address using an crc16 of the serial for the top 16bits with the lower 2 bits masked to setup the unicast locally administered property and a crc24 for the lower 24bits. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04ARM: meson: sm: Add secure monitor calls to retrieve SoC serial numberNeil Armstrong
The Secure Monitor interface permits retrieving the SoC Serial Number, add a function to retrieve it. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-04board: amlogic: vim: Fix READMEAndreas Färber
Unlike the BayLibre repos Khadas' repo defaults to using native gcc, so specify the CROSS_COMPILE setting matching the prescribed toolchain. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-07-02Merge tag 'rockchip-for-v2019.07-rc5-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - fix for atf bl31_image_info pointer - fix for rockpro64 vdd_log init - fix for tinker-rk3288 SPL size too big
2019-07-02rockchip: rk3288: enable TPL for tinker-boardKever Yang
All the config for TPL has been update, we can enable the TPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: config: tiner-rk3288: extend CONFIG_SYS_MONITOR_LEN to 600KBKever Yang
The raw u-boot.bin for tinker board has been about 450KB without debug option, and 550KB with all debug on, and the default value is 200KB, which is not enough for run raw u-boot.bin. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: config: update config for TPL support on tinker-rk3288Kever Yang
We need to update TEXT BASE for TPL/SPL/U-Boot; SPL no need relocate STACK after enable TPL, so remove it; Don't enable pinctrl names so that SPL can get pinctrl dts; Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: rk3288-tinker: enable sdmmc pinctrl node in splKever Yang
rockchip pinctrl driver has update to use dts, so we need to add the pinctrl config in SPL for sdmmc. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: tinker: migrate the dm-pre-reloc tag into -u-boot dtsKever Yang
Migrate all the "u-boot,dm-pre-reloc" tag from rk3288-tinker.dts into rk3288-tinker-u-boot.dtsi. When both board level and soc level '-u-boot.dtsi' files exist, we need to include the soc level 'rk3288-u-boot.dtsi' manually. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: rk3288: move reloc tag into -u-boot dtsKever Yang
Move all the tag "u-boot,dm-pre-reloc" from rk3288.dtsi into rk3288-u-boot.dtsi. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: rk3288: add separate TPL STACK addressKever Yang
TPL is at SRAM while other stage is at SDRAM, so it needs separate STACK. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-02rockchip: rk3288: enable TPL configs to chip levelKever Yang
More boards other than vyasa needs TPL, so enable the TPL configs at chip level instead of board level. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-02rockchip: dts: rk3399: rockpro64: Provide init voltageMark Kettenis
Add missing regulator-init-microvolt property to vdd_log regulator. Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Rebase on latest u-boot-rockchip master) Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Change-Id: I13b24fb81e8ad269d7dbb0c7b67f5f4795d2e775
2019-07-02spl: atf: Fix uninitialized pointer to bl31_image_infoFrieder Schrempf
The pointer to struct atf_image_info in bl31_params_mem.bl31_params.bl31_image_info is not initialized before being dereferenced. This can cause U-Boot to crash right before jumping to the BL31 ATF binary. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Fixes: bcc1726a7bdd ("spl: add support to booting with ATF") Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-01poplar: increase SYS_MALLOC_F_LEN for DM_FLAG_PRE_RELOC supportShawn Guo
There is a regression seen on Poplar platform, which doesn't even show a U-Boot version banner on booting. It turns out that due to landing of commit 3a7c45f6a772 ("simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver"), we need to increase SYS_MALLOC_F_LEN from its default size 0x400, as pre-relocation requires more memory there. Let's increase SYS_MALLOC_F_LEN to 0x4000 to fix the regression. Thanks to Andreas Färber <afaerber@suse.de> for reporting, and Bin Meng <bmeng.cn@gmail.com> for trouble shooting. Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Andreas Färber <afaerber@suse.de>
2019-07-01Merge tag 'u-boot-atmel-fixes-2019.07-b' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel Second set of u-boot-atmel fixes for 2019.07 cycle
2019-06-29Merge tag 'uniphier-v2019.07' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-uniphier UniPhier SoC updates for v2019.07 - Add SPI pin-mux data for pinctrl driver - Remove unused code - Trivial bug-fix and clean-up
2019-06-29Merge tag 'efi-2019-07-rc5-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.07-rc5 (4) The definition of an unimplemented function is corrected.
2019-06-29ARM: uniphier: move sg_set_{pinsel, iectrl} to more relevant placesMasahiro Yamada
Move the sg_set_pinsel macro to arch/arm/mach-uniphier/arm32/debug_ll.S since it is not used anywhere else. Move the C functions sg_set_{pinsel,iectrl} to debug-uart.c since they are not used anywhere else. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29ARM: uniphier: remove unused init code for CONFIG_DEBUG_UARTMasahiro Yamada
debug_uart_init() is called from spl_board_init(), which is only compiled for SPL. For U-boot proper, _debug_uart_init() is unreachable, so dropped by the dead code elimination. Now that 64-bit SoCs of this SoC family no longer support SPL, debug-uart-ld20.c is never compiled. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29ARM: uniphier: include <linux/io.h> from dram_init.cMasahiro Yamada
This file calls readl(), so needs to include <linux/io.h>. Currently, it relies on someone else including it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29ARM: uniphier: remove unused sg_set_iectrl_range()Masahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29ARM: uniphier: remove unused SC_DPLLOSCCTRLMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29ARM: uniphier: fix build error for CONFIG_DEBUG_LL=yMasahiro Yamada
Commit e27d6c7d328c ("ARM: uniphier: simplify SoC ID get function") accidentally removed the macros needed to compile debug_ll.S Revive them. Fixes: e27d6c7d328c ("ARM: uniphier: simplify SoC ID get function") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29pinctrl: uniphier: Add SPI pin-mux settingsKunihiko Hayashi
Add pin-mux settings for SPI controller. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-06-29efi_loader: correct signature of ConvertPointer()Heinrich Schuchardt
ConvertPointer() must be EFIAPI. The first parameter should be of type efi_uint_t. Use the same parameter name as the UEFI specification. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-28Merge tag 'u-boot-imx-20190628' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board
2019-06-28Merge tag 'u-boot-stm32-20190628' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm STM32 MCU fixes/cleanup: - Fix SPL console for STM32F769 Discovery - Fix Memory Protection Unit size for STM32F4 series - Cleanup DT for STM32F746 Discovery
2019-06-28mach-stm32: Fix MPU region size dedicated to SDRAM for STM32F4Patrice Chotard
The MPU region dedicated for SDRAM for STM32F4 SoCs family was set to 16MB, but STM32F429 Evaluation board have 32MB of SDRAM. When kernel starts, only first 16MB of SDRAM are configured with XN (eXecute Never) bit disabled, whereas kernel is using 32MB. To avoid such situation in the future, extend this MPU region to 512MB as for STM32F7/H7. It fixes the following user land exception on STM32F429 Evaluation board : [ 1.713002] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.722605] devtmpfs: mounted [ 1.733057] Freeing unused kernel memory: 72K [ 1.737622] This architecture does not have kernel memory protection. [ 1.744070] Run /sbin/init as init process [ 1.906850] [ 1.906850] Unhandled exception: IPSR = 00000004 LR = fffffffd [ 1.914282] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6 [ 1.921433] Hardware name: STM32 (Device Tree Support) [ 1.926601] PC is at 0x1a00b64 [ 1.929642] LR is at (null) [ 1.932669] pc : [<01a00b64>] lr : [<00000000>] psr: 01000000 [ 1.938993] sp : 01a5cfb0 ip : 00000000 fp : 00000000 [ 1.944269] r10: 01a43b00 r9 : 00000000 r8 : 00000000 [ 1.949564] r7 : 00000000 r6 : 00000000 r5 : 00000000 r4 : 00000000 [ 1.956168] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : 00000000 [ 1.962701] xPSR: 01000000 [ 1.965506] CPU: 0 PID: 1 Comm: init Not tainted 5.1.0-00002-gcf9ca5719954 #6 [ 1.972658] Hardware name: STM32 (Device Tree Support) [ 1.978132] [<0000c009>] (unwind_backtrace) from [<0000b24f>] (show_stack+0xb/0xc) [ 1.986024] [<0000b24f>] (show_stack) from [<0000b947>] (__invalid_entry+0x4b/0x4c) Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28ARM: dts: stm32: Remove useless u-boot, dm-pre-reloc in ↵Patrice Chotard
stm32f746-disco-u-boot.dtsi As in stm32f7-u-boot.dtsi these nodes already have "u-bootdm-pre-reloc" property, no need to add them again in stm32f746-disco-u-boot.dtsi. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28ARM: dts: stm32: Add u-boot, dm-pre-reloc for usart1_pins_a for stm32f769-discoPatrice Chotard
This allow to get console output in SPL for stm32f769-disco. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-06-28apalis_imx6: increase phy autoneg timeoutIgor Opaniuk
Default value (4000ms) of PHY_ANEG_TIMEOUT for Micrel KSZ9031 contoller isn't sufficient to finish auto-negotiation, which sometimes leads to timeout errors: Apalis iMX6 # dhcp FEC Waiting for PHY auto negotiation to complete......... TIMEOUT ! Increase the auto-negotiation time-out to 15000ms. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-06-28ARM: imx: m53menlo: Convert to DM VIDEOMarek Vasut
Enable DM Video support on iMX53 M53Menlo and fix minor details to restore previous behavior of the system. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27ARM: imx: m53menlo: Convert MMC, USB and block to DMMarek Vasut
Enable DM block and DM MMC and DM USB support on iMX53 M53Menlo . Convert board code to match the DM support. This also enables DM pincontrol to configure the SDHI pins. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27ARM: imx: m53menlo: Enable DM GPIOMarek Vasut
Enable DM GPIO support on iMX53 M53Menlo and fix up board code where applicable. Enable MALLOC_F to let the GPIO controllers bind early on. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27ARM: dts: imx: m53menlo: Import M53Menlo DT from LinuxMarek Vasut
Import iMX53 M53Menlo device tree from Linux next-20190607 3f310e51ceb1 . Enable DT control in full U-Boot . Add U-Boot extras into separate DTSi, the GPIO controllers need to be inited early, otherwise m53_set_clock() won't be able to detect the correct CPU clock frequency by reading the GPIO. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27ARM: dts: imx: imx53: Synchronize iMX53 DT with LinuxMarek Vasut
Synchronize iMX53 device tree from Linux next-20190607 3f310e51ceb1 , this is needed to get NFC, UART, USBOTG DT nodes. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2019-06-27pico-imx7d: remove unused 'script' variablePierre-Jean Texier
Since the pico-pi uses the distroboot, this commit remove the 'script' variable (cf boot_scripts). Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-27mx6sl: hab: Fix pu_irom_mmu_enabled addressBreno Matheus Lima
According to hab.c code we have to notify the ROM code if the MMU is enabled or not. This is achieved by setting the "pu_irom_mmu_enabled" to 0x1. The current address in hab.c code is wrong for i.MX6SL, according to ROM map file the correct address is 0x00901c60. As we are writing in the wrong address the ROM code is not flushing the caches when needed, and the following HAB event is observed in certain scenarios: --------- HAB Event 1 ----------------- event data: 0xdb 0x00 0x14 0x41 0x33 0x18 0xc0 0x00 0xca 0x00 0x0c 0x00 0x01 0xc5 0x00 0x00 0x00 0x00 0x07 0xe4 STS = HAB_FAILURE (0x33) RSN = HAB_INV_SIGNATURE (0x18) CTX = HAB_CTX_COMMAND (0xC0) ENG = HAB_ENG_ANY (0x00) Update MX6SL_PU_IROM_MMU_EN_VAR to address this issue. Reported-by: Frank Zhang <frank.zhang@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-27pico-imx7d: README: Adjust the binary name after DM conversionFabio Estevam
After the conversion to DM the U-Boot binary is called u-boot-dtb.imx, so fix the README file accordingly. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Joris Offouga <offougajoris@gmail.com>
2019-06-27apalis_imx6: fix set_emmcargs wrapperIgor Opaniuk
Fix set_emmcargs wrapper, which prepares proper bootargs for booting from eMMC. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
2019-06-27usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDPFrieder Schrempf
Add support for loading u-boot FIT images over the USB SDP protocol in the SPL Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> [Various build fixes] Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Tested-by: Fabio Estevam <festevam@gmail.com> Tested-by: Lukasz Majewski <lukma@denx.de>
2019-06-27Merge tag 'rockchip-for-v2019.07-rc5' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - new board: rk3328 rock64 - rk3328 SPL support - rk3399 spl/tpl board init cleanup - use environment to get ATF binary for rk3399 - build u-boot.itb target by default for rockchip - rk3399 board init fix after pinctrl patch set merged
2019-06-27board: atmel: fix pda variable not being resetEugen Hristev
In case someone detects a PDA and u-boot sets the 'pda' variable, and the user does a saveenv, the pda is set in env, and if the screen is removed, u-boot will still have in the env the 'pda' variable, even if no screen is attached. In order to fix this, we have to reset the 'pda' variable, such that it's not just set if the screen is detected, but also unset if no screen is detected. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-06-26rockchip: rk3399: Fix enabling boot-on regulatorsMark Kettenis
The new common rockchip pinctrl driver does not support explicit requests for a particular pinctrl function. As a result, the board_init() function bails out early before enabling the boot-on regulators. Fix this by simply removing the request for pwm0, pwm2 and pwm3. The generic DM code already does the necessary configuration if necessary. Reported-by: Levin Du <djw@t-chip.com.cn> Signed-of-by: Mark Kettenis <kettenis@openbsd.org>
2019-06-26rockchip: rk3399: Enable TPL_BOARD_INITJagan Teki
Enable TPL_BOARD_INIT, this would help us to show TPL boot prints. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: tpl: Mark printascii into debugJagan Teki
Now, we have spl_board_init which has TPL banner prints. So mark the 'U-Boot TPL board init' print into debug. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: tpl: Add spl_board_initJagan Teki
Add spl_board_init for TPL, that have TPL banner will help to print tpl boot prints. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: Enable SPL_BOARD_INITJagan Teki
Enable SPL_BOARD_INIT globally to rk3399, this would help to print the SPL banner during bootup. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2Jagan Teki
u-boot,dm-pre-reloc for uart0, uart2 indeed u-boot specific properties. Move them into rk3399-u-boot.dtsi so the boards which enabled these node will available during SPL. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-27 21:46:28 +0000