summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-07-29powerpc/85xx: Add support for P2041[e] XAUI in SERDESKumar Gala
We add XAUI_FM1 into the SERDES tables for P2041[e] devices. However for the P2040[e] devices that dont support XAUI we handle this at runtime via SVR checks. If we are on a P2040[e] device the SERDES functions will behave as follows: is_serdes_prtcl_valid() will always report invalid if prtcl passed in is XAUI_FM1. serdes_get_prtcl() will report NONE if the prtcl in the table is set to XAUI_FM1. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-29powerpc/85xx: Rename P2040 id & SERDES to P2041Kumar Gala
P2041 is the superset part that covers both P2040 & P2041. The only difference between the two devices is that P2041 supports 10g/XAUI and has an L2 cache. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-29powerpc/85xx: Adding configuration for DCSRCR to enable 32M accessStephen George
Configuring DCSRCR to define the DCSR space to be 1G instead of the default 4M. DCSRCR only allows selection of either 4M or 1G. Most DCSR registers are within 4M but the Nexus trace buffer is located at offset 16M within the DCSR. Configuring the LAW to be 32M to allow access to the Nexus trace buffer. No TLB modification is required since accessing the Nexus trace buffer from within u-boot is not required. Signed-off-by: Stephen George <stephen.george@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-29powerpc/85xx: Fix setting of EPAPR_MAGIC valueKumar Gala
Had a typo in the ifdef for 85xx, should be CONFIG_MPC85xx for it to get triggered. Was pull in the non-BookE magic number. Reported-by: John Cortell Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-07-29cfb_console: fix build breakageAndreas Bießmann
Commit 09c2e90c110ef99f1203685acd1059114a51b167 "unify version_string" introduced a build breakage in cfb_console.c ---8<--- cfb_console.c:1497: warning: format '%s' expects type 'char *', but argument 3 has type 'const char (*)[]' --->8--- Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-07-28panic: remove warning "'noreturn' function does return"Heiko Schocher
since commit commit d2e8b911c0a0661d395ccac72156040702ac842d Author: Mike Frysinger <vapier@gentoo.org> Date: Wed Jun 29 11:58:04 2011 +0000 panic: add noreturn attribute I see the following warnings: vsprintf.c: In function 'panic': vsprintf.c:730: warning: 'noreturn' function does return for nearly all boards. This patch fixes this warning. Signed-off-by: Heiko Schocher <hs@denx.de> cc: Mike Frysinger <vapier@gentoo.org>
2011-07-28post, memory test: add memory_post_test() to include fileHeiko Schocher
This include is needed, if this memory test is used "outside" from post code, for example booting with nand_spl, and using this memory test before copying u-boot code to RAM and jumping to it. Signed-off-by: Heiko Schocher <hs@denx.de>
2011-07-28Fix build error causes by "unify version_string"Wolfgang Denk
Commit 09c2e90 "unify version_string" introduced a build error, fix it. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-07-28Removed obsolete Netstal boardsNiklaus Giger
Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
2011-07-28cleanup: Fix typos and misspellings in various files.Mike Williams
Recieve/Receive recieve/receive Interupt/Interrupt interupt/interrupt Addres/Address addres/address Signed-off-by: Mike Williams <mike@mikebwilliams.com>
2011-07-28rules.mk: replace GNU specific \w with POSIX equivalantJeroen Hofstee
If sed does not support the GNU \w regex extension, build attempts lead to circular dependency warnings and finally build failure (crc32.c not found). Build output before and after the patch on FreeBSD is at: http://lists.denx.de/pipermail/u-boot/2011-June/095235.html Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2011-07-28mkconfig: also create CONFIG defines with BSD sedJeroen Hofstee
Parsing of boards.cfg fails on FreeBSD with the error: sed: 1: "/=/ {s/=/\t/;q } ; { s/ ...": extra characters at the end of q command BSD sed expects commands to be on seperate 'lines', hence it expects an additional ; before the closing brackets. BSD sed does not support \t, replaced by literal tab. Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28include/compiler.h: typedef ulong for FreeBSDJeroen Hofstee
Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
2011-07-28unify version_stringAndreas Bießmann
This patch removes the architecture specific implementation of version_string where possible. Some architectures use a special place and therefore we provide U_BOOT_VERSION_STRING definition and a common weak symbol version_string. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> CC: Mike Frysinger <vapier@gentoo.org> CC: Peter Pan <pppeterpppan@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28Correct ih_os for u-boot.imganeeshv
Provide appropriate '-O u-boot' while doing mkimage for u-boot.img Signed-off-by: Aneesh V <aneesh@ti.com>
2011-07-28mkimage: add UBL header support for booting davinci cpusHeiko Schocher
creating an u-boot.ubl file, which contains the UBL Header needed for booting from NAND with the RBL from TI. For more information read doc/README.ublimage. Signed-off-by: Heiko Schocher <hs@denx.de>
2011-07-28MAINTAINERS: integrator+versatile boardsLinus Walleij
- Take maintainership of the unlisted integratorap board - Orphan the boards maintained by Peter Pearse, as he has retired from ARM Cc: Philippe Robin <philippe.robin@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-07-28mv_common.c: don't compile reset_environment if ENV_IS_NOWHEREMichael Jones
Doesn't make sense to provide this function to boards which defined CONFIG_ENV_IS_NOWHERE. Such a board gets a linking error because common/env_nowhere.c doesn't define saveenv(). Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-07-28fpga: support FPP Cyclone configurationMichael Jones
Support FPGAs which use Fast Passive Parallel configuration Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
2011-07-28fpga: add #define for Altera Cyclone EP3C5Michael Jones
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
2011-07-28cmd_mac: fix help for 'mac read'Michael Jones
In the only implementation of 'mac read', it doesn't display the contents of the eeprom as the help indicated unless compiled with DEBUG. It only re-reads the contents of the EEPROM into memory. Displaying the contents of the EEPROM is done by passing no arguments to 'mac'. Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28cmd_mac: cleanup helpMichael Jones
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28altera: fix printf typoMichael Jones
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28cosmetic: spell fixes etc.Michael Jones
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28Let source cross-reference targets follow symbolic linksHorst Kronstorfer
Tell 'find' to follow symbolic links, so that files under include/asm and arch/$(ARCH)/include/asm/arch are added to the indexing file list. Signed-off-by: Horst Kronstorfer <hkronsto@frequentis.com> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28km/common: i2c deblock: enabled print of i2c deblock statusStefan Bigler
Enable printout of i2c deblocking status if chips were in block state or deblocking failed. Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-28km/common: moved eeprom config to pbec specific partStefan Bigler
Moved eeprom config to specific part, to allow bigger eeprom write pages for km_kirkwood designs. Write page only used for env eeprom in std use cases. 24C128 has page size of 64bytes -> 8 time faster. Signed-off-by: Stefan Bigler <stefan.bigler@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-28km/common: use u-boot.kwb for u-boot update function on armHolger Brunck
Now we use the standard u-boot make to build the Kirkwood binary. The output file is u-boot.kwb. So use this name for the tftp update function to avoid confusion, because this is the binary we need on Kirkwood. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-28km/common: add printings to boardid commandsHolger Brunck
Be verbose if do_setboardid was called and print correct names of variables in do_checkboardidhwk. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-28ext2: Simplify partial sector access logicAnton Staaf
Previously reading or writing zero full sectors (reading the end of one sector and the beginning of the next for example) was special cased and involved stack allocating a second sector buffer. This change uses the same code path for this case as well as when there are a non-zero number of full sectors to access. The result is easier to read and reduces the maximum stack used. Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-28ext2: Fix checkpatch violationsAnton Staaf
Fix all checkpatch violations in the low level Ext2 block device reading code. This is done in preparation for cleaning up the partial sector access code. Signed-off-by: Anton Staaf <robotboy@chromium.org> Cc: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-27common: move BUILD_BUG_ON define to common.hHeiko Schocher
see discussion also here: http://patchwork.ozlabs.org/patch/75309/ Signed-off-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Holger Brunck <holger.brunck@keymile.com>
2011-07-27km/common: enable cramfs and cramfs cmdlineHolger Brunck
All the km boards uses CRAMFS images where the kernel is stored. This isn't architecture specific because we use it on ARM and POWERPC. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27powerpc/km82xx: remove 82xx specific functions from common.cHolger Brunck
Common code should be valid for more than one architecture, therefore the km82xx specific code was removed from common.c. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: remove fdt_(gs)et_node_and_valueHolger Brunck
This code is unused and therefore dead code. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: move ivm functions from to ivm.cHolger Brunck
The file common.c grows in the past. So move the IVM specific code into an ivm.c file. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: remove saveenv from do_checkboardidhwkeyHolger Brunck
This is unneeded here because we save the environment when the board boots the first time. At this time we have set the values already. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: force set ethaddr after reading IVMHolger Brunck
The ethaddr is stored inside the inventory eeprom. During boottime this value was read out and the ethaddr variable was set. Previously this was only done if it ethaddr == NULL but this is wrong for our ARM boards. Because ethaddr is at this stage never NULL for ARM due to the random calculation of a MAC address in mvgbe.c. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: remove obsolete defines and headerHolger Brunck
These defines and the header keymile_hdlc_enet.h are obsolete due to the removed hdlc code. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: simplify debug environmentHolger Brunck
The debug environment which is stored in textfiles in the scripts directory was reworked. Two usecase are now present which can be executed simply from the default environment: run develop: this configures the environment to setup the rootfs via nfs run ramfs: this configures the environment to setup the rootfs in ram Each architecture now has a "arch" variable which is used to load the architecture specific debug scripts and to set the rootpath for NFS. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27km/common: add test sw starting variableThomas Herzmann
The test SW is started when the test_bank variable is set. Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2011-07-27km/common: rework and simplify default environmentHolger Brunck
This is the second step to simplify and decrease the default environment for the keymile boards. The release usecase formaly used to set the production environment was removed and the default configuration is now the production environment. So the formar environment variable "release" which has done a lot of things in the past, simply erase the current environment and do a reset which forces u-boot to setup the default environment again. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de>
2011-07-27part_dos: fix crash with big sector sizeSergei Shtylyov
Apple iPod nanos have sector sizes of 2 or 4 KiB, which crashes U-Boot when it tries to read the MBR into 512-byte buffer situated on stack. Instead use the variable length arrays to be safe with any large sector size. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
2011-07-27post, memorytest: add support for none powerpc archsHeiko Schocher
change bd->bi_memsize to gd->ram_size, as this is defined on all archs, so this post test can used on none powerpc archs too. Signed-off-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <hs@denx.de> cc: Mike Frysinger <vapier@gentoo.org>
2011-07-27post, memorytest: fix if vstart is not = 0x0Heiko Schocher
Signed-off-by: Heiko Schocher <hs@denx.de>
2011-07-27net: Add SMSC89128 supportPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Cc: Ben Warren <biggerbadderben@gmail.com>
2011-07-27digsy_mtc: move board into vendor dir and add vendor logoAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-07-27mpc5200: digsy_mtc: add support for writing 'appreg' valueAnatolij Gustschin
Up to now only reading 'appreg' value was implemented in the digsyMTC special 'mtc appreg' command. Extend the command to support writing appreg value, too. Signed-off-by: Werner Pfister <Pfister_Werner@intercontrol.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-27mpc5200: digsy_mtc: add support for graphic extension boardAnatolij Gustschin
Add detection and initialisation for graphic extension board and support splash screen when booting. Enable "bmp" command in the board configuration and provide "disp" command to be able to switch the display on/off. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Detlev Zundel <dzu@denx.de>
2011-07-27phylib: Detect link on 10G devices correctlyAndy Fleming
gen10g_startup() had 2 bugs: 1) It had a boolean logic error in checking the MMD mask, and always checked all of them. 2) It checked devices which don't actually report link state, which meant that it would never believe the link was fully up. Fix the boolean logic, and then mask the MMD mask so only link-reporting devices are checked. Signed-off-by: Andy Fleming <afleming@freescale.com> Reported-by: Ed Swarthout <Ed.Swarthout@freescale.com>
generated by cgit (git 2.34.1) at 2024-12-28 13:34:06 +0000