summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-17x86: fsp: Support a warning message when DRAM init is slowSimon Glass
With DDR4, Intel SOCs take quite a long time to init their memory. During this time, if the user is watching, it looks like SPL has hung. Add a message in this case. This works by adding a return code to fspm_update_config() that indicates whether MRC data was found and a new property to the device tree. Also add one more debug message while starting. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUMESimon Glass
At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17coral: Enable the copy framebufferSimon Glass
Enable this feature on chromebook_coral to speed up the display. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from 1830ms to 62ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17timer: Allow delays with a 32-bit microsecond timerSimon Glass
The current get_timer_us() uses 64-bit arithmetic on 32-bit machines. When implementing microsecond-level timeouts, 32-bits is plenty. Add a new function that uses an unsigned long. On 64-bit machines this is still 64-bit, but this doesn't introduce a penalty. On 32-bit machines it is more efficient. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: p2sb: make P2SB driver depend on P2SB uclassWolfgang Wallner
Currently it is possible to select the P2SB driver without selecting the P2SB uclass, which can't work. Fix this by adding a "depends on" in Kconfig. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband BridgeWolfgang Wallner
In Intel's documentation the term P2SB stands for "Primary to Sideband Bridge". Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-16Merge tag 'efi-2020-10-rc1-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-10-rc1 (4) Improvements for the UEFI subsystem include: * support for read-only TEE-backed variables * allow to compile PK, KEK, db, dbx fixed values into U-Boot * bug fixes Python testing related changes comprise: * enable 'bootefi hello' for better test coverage * remove SKIP messages in UEFI Python tests The fitupd command is dropped. Build errors for the lsblk command are fixed.
2020-07-16mx6memcal: fix buildStefano Babic
Commit 4503299 has a side effect on this board, and build is broken. Adjust mx6memcal_defconfig to build it again. Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-07-16efi_loader: simplify 'printenv -e'Heinrich Schuchardt
Currently default output of 'printenv -e' is restricted to variables with GUID EFI_GLOBAL_VARIABLE. This excludes db and dbx. As the number of variables is small there is no need for this restriction. If no GUID is provided, print all matching variables irrespective of GUID. Always show the numeric value of the GUID. If the GUID provided to 'setenv -e' is invalid, return CMD_RET_USAGE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: describe EFI_VAR_FILE_MAGICHeinrich Schuchardt
Add documentation for EFI_VAR_FILE_MAGIC used in the file format for UEFI variables. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: pre-seed UEFI variablesHeinrich Schuchardt
Include a file with the initial values for non-volatile UEFI variables into the U-Boot binary. If this variable is set, changes to variable PK will not be allowed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: identify PK, KEK, db, dbx correctlyHeinrich Schuchardt
To determine if a varible is on the of the authentication variables PK, KEK, db, dbx we have to check both the name and the GUID. Provide a function converting the variable-name/guid pair to an enum and use it consistently. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: configuration of variables storeHeinrich Schuchardt
The file based and the OP-TEE based UEFI variable store are mutually exclusive. Define them as choice options in Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16doc: provide links to Microsoft UEFI certificatesHeinrich Schuchardt
Some distributions provide UEFI binaries like Shim that have been signed using a Microsoft certificate. Provide the download paths for the public keys. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: update secure stateHeinrich Schuchardt
Update the UEFI secure state when variable 'PK' is updated in the TEE variables implementation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-07-16efi_loader: restructure code for TEE variablesHeinrich Schuchardt
When using secure boot functions needed both for file and TEE based UEFI variables have to be moved to the common code module efi_var_common.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: display RO attribute with TEE-backed variablesIlias Apalodimas
A previous commit adds support for displaying variables RO flag. Let's add it on the TEE backed variable storage as well. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: skip warnings for network configurationHeinrich Schuchardt
Skip messages should only be written if the setup is not suitable for testing. If DHCP is enabled, we should not write a skip message if no static network configuration is supplied. Likewise if a static network configuration is supplied, we should not write a skip message if DHCP is not enabled. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_selftest: enable 'bootefi hello'Heinrich Schuchardt
In our Python tests we want to run 'bootefi hello'. Enable it by default when compiling with CMD_BOOTEFI_SELFTEST. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16cmd: fix lsblk commandHeinrich Schuchardt
Add missing includes. Add CMD_LSBLK to sandbox_defconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16cmd: drop fitupd commandHeinrich Schuchardt
The `fitupd' command is not used by any board. The `dfu tftp' command provides the same capabilities. So let's drop the `fitupd' command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16imx6: Remove unneeded CONFIG_DM_MDIOFabio Estevam
As explained in the CONFIG_DM_MDIO text inside drivers/net/Kconfig: "Useful in particular for systems that support DM_ETH and have a stand-alone MDIO hardware block shared by multiple Ethernet interfaces." i.MX6 has a single FEC instance, so there is no need to select CONFIG_DM_MDIO. Remove it from the i.MX6 defconfig files. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-07-16arm: dts: imx7: Fix error in coresight TPIU graph connectionIlko Iliev
OF graph endpoint connections must be bidirectional and dtc warn if they are not. i.MX7 based DTs have an error and generate warnings: arch/arm/dts/imx7d-sdb.dtb: Warning (graph_endpoint): /replicator/ports/port@0/endpoint: graph connection to node '/soc/tpiu@30087000/port/endpoint' is not bidirectional arch/arm/dts/imx7d-sdb.dtb: Warning (graph_endpoint): /soc/tpiu@30087000/port/endpoint: graph connection to node '/replicator/ports/port@1/endpoint' is not bidirectional Signed-off-by: Ilko Iliev <iliev@ronetix.at>
2020-07-16arm: Add extra boot device (UART) to run Ymodem u-boot.img boot on XEA (imx28)Lukasz Majewski
This commit enables imx28 based XEA board's u-boot.sb (SPL) to download u-boot proper (u-boot.img) via Ymodem protocol. This is extremely useful in the recovery scenario where u-boot.sb is downloaded via uuu utility to SDRAM [*], and then one can upload u-boot proper via serial console to fully debrick the device. Note - debricking procedure of imx28 devices: - NXP's original USB based tools (like mxsldr or uuu) expect single u-boot.sb which is a relic of the old U-Boot (~2013) without SPL and U-Boot proper distinction. [*] On Host: ------------ cat << EOF > imx28_xea.lst uuu_version 1.3.0 SDPS: boot -f /srv/tftp/xea/u-boot.sb SDPU: done EOF Please start picocom: sudo picocom -b 115200 -s "sz -vv" /dev/ttyUSB1 sudo ./uuu/uuu -V imx28_xea.lst On the U-boot console one shall see: Trying to boot from UART CCC Then please press CTRL+A, S and type u-boot.img Signed-off-by: Lukasz Majewski <lukma@denx.de> Acked-by: Peng Fan <peng.fan@nxp.com>
2020-07-16imx6: aristainetos: sync defconfig with 2020.10Heiko Schocher
as patch gpio: search for gpio label if gpio is not found through bank name is now in mainline, but functionality is disabled, we need to enable CONFIG_DM_GPIO_LOOKUP_LABEL for the aristainetos boards. Signed-off-by: Heiko Schocher <hs@denx.de>
2020-07-16watchdog: imx: Support set timeout by wdt commandMo, Yuezhang
After "4b969deac0 watchdog: imx: Add DM support", the imx watchdog can be started by wdt command. But the imx watchdog driver only support start with the default timeout. This commit adds the support for setting the timeout which pass from the wdt command into the imx watchdog. If the timeout out of the valid range(0.5~128s), start the watchdog with a timeout within the valid range and the timeout is the one which closest to the passed timeout. Signed-off-by: Yuezhang.Mo <yuezhang.mo@sony.com> Reviewed-by: Andy.Wu <Andy.Wu@sony.com> Reviewed-by: stefano Babic <sbabic@denx.de>
2020-07-16power: pmic_pca9450: fix PCA9450A I2C addressSébastien Szymanski
Quoting Ye Li from NXP: "We have confirmed with PMIC team, 0x35 is used only on early chips and not used any more. 0x25 is the final address." Fix it by merging power_pca9450a_init and power_pca9450b_init into one function power_pca9450_init. Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-07-16ARM: mx6: make CAAM usable on the i.MX6 boardsHeinrich Schuchardt
Even if the HAB fuse is not set we want to be able to use the Cryptographic Accelerator and Assurance Module (CAAM) for generating random numbers. So SYS_FSL_HAS_SEC should be selected even if IMX_HAB is not set. arch_misc_init() has to be called to initialize the CAAM. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16pico-imx6ul: Fix Quick Start Guide URLFabio Estevam
The current URL for the pico imx6ul board is not valid anymore. Change to a different URL that works. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-07-16gpio: mxc_gpio: Improve to use ofdata_to_platdataYe Li
Current mxc_gpio DM driver allocates the platdata in bind function to handle both OF_CONTROL enabled case and disabled case. This implementation puts the devfdt_get_addr in bind, which introduces much overhead especially in board_f phase. Change the driver to a common way for handling the cases by using ofdata_to_platdata and using DM framework to allocate platdata. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-16misc: scu_api: Add SCFW API to get the index of boot container setYe Li
Add SCFW API sc_misc_get_boot_container to get current boot container set index. The index value returns 1 for primary container set, 2 for secondary container set. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-07-16spi: fsl_qspi: Support to use full AHB space on i.MXYe Li
i.MX platforms provide large AHB mapped space for QSPI, each controller has 256MB. However, current driver only maps small size (AHB buffer size) of AHB space, this implementation causes i.MX failed to boot M4 with QSPI XIP image. Add config CONFIG_FSL_QSPI_AHB_FULL_MAP (default enabled for i.MX) to address above problem. When the config is set: 1. Full AHB space is divided to each CS. 2. A dedicated LUT entry is used for AHB read only. 3. The MODE instruction in LUT is replaced to standard ADDR instruction 4. The address in spi_mem_op is used to SFAR and AHB read Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
2020-07-16spi: fsl_qspi: Add support for i.MX7ULPYe Li
Add compatible string and driver data for i.MX7ULP. Meanwhile, the address set to SFA1AD/SFA2AD/SFB1AD/SFB2AD should align with 1KB, because the lowest 10 bits are reserved by the registers definition. For i.MX7ULP which has only 128Bytes AHB buffer, must align it when setting the registers and selecting cs. Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
2020-07-15Merge tag 'mmc-7-24-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- Correct mmc_spi check condition - Generate R1/R2/R1b response - Read SSR for SD SPI
2020-07-15Merge branch '2020-07-15-ci-updates'Tom Rini
- Make sure GRUB is copied to the right place for CI on GitLab/Azure - Note in our GitHub PR template that you can use this to trigger Azure CI
2020-07-15Azure: copy GRUB to correct build pathHeinrich Schuchardt
The GRUB binaries are expected in $UBOOT_TRAVIS_BUILD_DIR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-15.gitlab-ci.yml: copy GRUB to correct build pathHeinrich Schuchardt
The GRUB binaries are expected in $UBOOT_TRAVIS_BUILD_DIR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-15github: azure: Update our GitHub template to note for CITom Rini
While the general policy of not taking changes to the project via pull requests directly on GitHub has not changed, it can be useful to submit a PR there in order to trigger a CI run on Azure. These are run automatically and the results are populated back to GitHub. Add a note to the template to reflect this. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-14Merge tag 'ti-v2020.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Sync DMA and CPSW DT bindings for K3 devices - Other minor fixes for mmc and other TI devices
2020-07-14arm: imx6q: pcm058: Convert pcm058 to use DM with DTsNiel Fourie
Convert pcm058 support to use device trees and the driver model. Add rudimentary boot scripts to the environment, expand README. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14arm: imx6q: pcm058: change MAINTAINERNiel Fourie
Change the MAINTAINER of pcm058. Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14arm: dts: imx6q: Add Linux dts files for Phytec MiraNiel Fourie
Add Phytec Mira device tree files, for use with pcm058. >From Linux 5.6, commit 7111951b8d49 upstream Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14dts-bindings: regulator: Add dlg,da9063-regulatorNiel Fourie
Add da9063-regulator bindings from Linux 5.6: commit 7111951b8d49 upstream Signed-off-by: Niel Fourie <lusus@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-07-14mmc_spi: generate R1b response for erase and stop transmission commandPragnesh Patel
As per the SD physical layer specification version 7.10, erase command (CMD38) and stop transmission command (CMD12) will generate R1b response. R1b = R1 + busy signal A non-zero value after the R1 response indicates card is ready for next command. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: Generate R1 response for erase block start and end addressPragnesh Patel
Erase block start address (CMD32) and erase block end address (CMD33) command will generate R1 response for mmc SPI mode. R1 response is 1 byte long for mmc SPI, so assign 1 byte as a response for this commands. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: Read R2 response for send status command - CMD13Pragnesh Patel
Send status command (CMD13) will send R1 response under SD mode but R2 response under SPI mode. R2 response is 2 bytes long, so read 2 bytes for mmc SPI mode Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: read ssr for SD spiPragnesh Patel
The content of ssr is useful only for erase operations. This saves erase time. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: generate R1 response for different mmc SPI commandsPragnesh Patel
R1 response is 1 byte long for mmc SPI commands as per the updated physical layer specification version 7.10. So correct the resp and resp_size for existing commands Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: correct the while conditionPragnesh Patel
When variable i will become 0, while(i--) loop breaks but variable i will again decrement to -1 because of i-- and that's why below condition "if (!i && (r != resp_match_value)" will never execute, So doing "i--" inside of while() loop solves this problem. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14imx8mm_evk: enlarge CONFIG_SYS_BOOTM_LENPeng Fan
Enlarge CONFIG_SYS_BOOTM_LEN when booting FIT image with kernel. Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit (git 2.34.1) at 2025-02-09 17:08:08 +0000