summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-20arm: baltos: use device tree alias to access Ethernet slaveYegor Yefremov
The full path has changed in the recent kernels so that it is not possible to load them. Aliases "ethernet0" and "ethernet1" are still present in both legacy and new kernels. Also, fix error messages to correspond to the taken actions. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2019-08-19Merge tag 'u-boot-rockchip-20190819' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add ROC-RK3399-PC board support - Move CONFIG_SPI_FLASH_GIGADEVICE and CONFIG_CMD_USB_MASS_STORAGE to Kconfig - using SYSRESET_POWER_OFF for poweroff (Note that patch for rk8xx pmic is droped for it can not pass Travis build) - fix ofnode_get_name() assert
2019-08-19Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- QEMU build warning fix when CONFIG_DISTRO_DEFAULTS=n - Small fixes on x86 reST docs - Allow CBFS to be used in SPL - Remove x86 specific GD flags
2019-08-19sysreset: move stm32mp sysreset poweroff implementation to sysreset uclassUrja Rannikko
This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF to signal when we need it. Enable it from the STPMIC1 config and in sandbox. The config flag is transitionary, that is it can be removed after all poweroff implementations use sysreset, and just have CMD_POWEROFF depend on sysreset. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-19sysreset: switch to using SYSRESET_POWER_OFF for poweroffUrja Rannikko
It seems that SYSRESET_POWER_OFF was added recently, and all previous code used SYSRESET_POWER for poweroff. SYSRESET_POWER is supposed to be a PMIC-level power cycle, not a poweroff. (Comment by Simon Glass) SYSRESET_POWER means to do a power reset (removing and reinstating all power) SYSRESET_POWER_OFF means to turn the device off and leave it off Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> (Update comment to help understand the patch) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19configs: update rk3288 veyron defconfigsUrja Rannikko
Updates jerry, mickey, minnie and speedy defconfigs to: - fit the SPL in 32k - boot from SPI (only) - remove gadget support (these have no OTG port) Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Rebase on top of tree) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19configs: Move CONFIG_CMD_USB_MASS_STORAGE properly into KconfigUrja Rannikko
This affects RK3036, RK322X and RK3288 - the defconfig changes done by moveconfig.py for the veyrons were left out on purpose because they dont have an OTG port, and will get their config updated in the next commit. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19configs: Move CONFIG_SPI_FLASH_GIGADEVICE properly into KconfigUrja Rannikko
Affects rk3288 veyrons and rk3036, this was mostly done by moveconfig.py. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-19core: ofnode: do not assert if node not valid in ofnode_get_name()Kever Yang
In some case with LIVE DT, some node always not valid, or not have a valid name, eg. blk driver add by mmc. Return fail instead of Assert for this kind of ofnode, and this help with assert happen from time to time when of_live is enabled and DEBUG is enabled. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-08-19rockchip: rk3399: Add ROC-RK3399-PC supportLevin Du
Add initial support for ROC-RK3399-PC board. Specification - Rockchip RK3399 - LPDDR4 4GiB - eMMC slot - SD card slot - RTL8211E 1Gbps - HDMI Out, DP, MIPI DSI/CSI, EDP - PCIe M.2 - USB 2.0, USB-3.0 - USB C Type Commit details of rk3399-roc-pc.dts sync from Linux v5.2: "arm64: dts: rockchip: add support for ROC-RK3399-PC board" (sha1: 8bb878cf20ae10809c36db96993bfce7026d062b) Signed-off-by: Levin Du <djw@t-chip.com.cn> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-08-18global_data: Remove comment of reserved arch-specific GD flagsStefan Roese
With the removal of the x86 specific GD flags, there are no arch- specific GD flags any more. Let's remove the comment about reserving the upper 16 bits for arch-specific flags in the common header. This gives us more flexibility with the usage of the GD flags. As a matter of fact, we are already using more than 16 bits for common GD flags (with the addition of GD_FLG_WDT_READY). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-08-18x86: Remove x86 specific GD flags as they are not referenced at allStefan Roese
This patch removes the x86 architecture specific GD flags (GD_FLG_COLD_BOOT & GD_FLG_WARM_BOOT), as they are not used. Only GD_FLG_COLD_BOOT is referenced in coreboot.c but assigned in start16.S. But the coreboot target does not use start16.S at all and boots directly from the 32-bit start code. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-18cbfs: Rename camel-case variablesSimon Glass
Rename some camel-case variables to match U-Boot style. Camel case is not generally allowed in U-Boot. Rename this variable to fit in with the style. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Add functions to support multiple CBFSsSimon Glass
Sometimes an image has multiple CBFS. The current CBFS API is limited to handling only one at time. Also it keeps track of the CBFS internally in BSS, which does not work before relocation, for example. Add a few new functions to overcome these limitations. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Move result variable into the structSimon Glass
Move the result variable into the struct also, so that it can be used when BSS is not available. Add a function to read it. Note that all functions sill use the BSS version of the data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Move static variables into a structSimon Glass
At present there are a number of static variables in BSS. This cannot work with SPL, at least until BSS is available in board_init_r(). Move the variables into a struct, so it is possible to malloc() it and use it before BSS is available. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Move declarations above functionsSimon Glass
At present this file has a function at the top, above declarations. This is normally avoided, so fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18cbfs: Allow CBFS to be used in SPLSimon Glass
Add a new Kconfig option to enable CBFS in SPL. This can be useful when the memory-init code is in CBFS. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18doc: arch: correct links in x86.rstHeinrich Schuchardt
Correctly reference uefi/uefi.rst and uefi/u-boot_on_efi.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18doc: formatting slimbootloader.rstHeinrich Schuchardt
Avoid a warning when building the 'make htmldocs' target: doc/board/intel/slimbootloader.rst:90: WARNING: Title underline too short. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-18x86: qemu: Fix build warnings with CONFIG_DISTRO_DEFAULTS=nBin Meng
Use DISTRO_BOOTENV to decouple BOOTENV from CONFIG_DISTRO_DEFAULTS. Reported-by: Heinrich Schuchardt <xypron.debian@gmx.de> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-17Merge tag 'efi-2019-10-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc3 This pull request provides corrections for the SetVirtualAddress runtime service and avoids possible calls to NULL by consumers of the EFI_PXE_BASE_CODE_PROTOCOL.
2019-08-17Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Misc gen5 fixes
2019-08-16Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix sifive serial y-modem transfer. - Access CSRs using CSR numbers. - Update doc sifive-fu540 - Support big endian hosts and target.
2019-08-15efi_loader: do not call efi_runtime_detach twiceHeinrich Schuchardt
Commit 7f95104d91cc ("efi_loader: detach runtime in ExitBootServices()") added a call to efi_runtime_detach() to ExitBootServices() but did not remove the call in SetVirtualAddressMap(). Remove the superfluous function call. Correct a comment referring to efi_runtime_detach(). Fixes: 7f95104d91cc ("efi_loader: detach runtime in ExitBootServices()") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15efi_loader: parameter check in SetVirtualAddressMapHeinrich Schuchardt
Check the parameters DescriptorSize and DescriptiorVersion of SetVirtualAddressMap() as prescribed by the UEFI specification. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15efi_loader: EFI_PXE_BASE_CODE_PROTOCOL stubHeinrich Schuchardt
U-Boot implements the EFI_PXE_BASE_CODE_PROTOCOL because GRUB uses the mode information for booting via PXE. All function pointers in the protocol were NULL up to now which will cause immediate crashes when the services of the protocol are called. Create function stubs for all services of the protocol returning EFI_UNSUPPORTED. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-08-15arm: socfpga: gen5: don't zero bss in board_init_f()Simon Goldschmidt
The socfpga gen5 SPL manually zeroed bss in board_init_f(). Now that the DDR driver does not use bss any more, bss is not used before board_init_r() and we can remove this hack. bss is normally zeroed by crt0.S, but after board_init_f(), before board_init_r(). socfpga just had this double-zeroing because it invalidly used bss in board_init_f() already (during DDR initialization). Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-08-15ARM: socfpga: update CONFIG_SPL_FS_LOAD_PAYLOAD_NAME to u-boot.imgDalon Westergreen
Bring cyclone5 / arria5 / arria10 in line with convention and use u-boot.img as CONFIG_SPL_FS_LOAD_PAYLOAD_NAME. Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
2019-08-15arm: socfpga: Fix SYSRESET_SOCFPGA_S10 config nameLey Foon Tan
The CONFIG name should be SYSRESET_SOCFPGA_S10 instead of SYSRESET_SOCFPGA_STRATIX10. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-08-15riscv: tools: Add big endian target support to prelink-riscvMarcus Comstedt
Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-08-15riscv: tools: Fix prelink-riscv to work on big endian hostsMarcus Comstedt
All ELF fields whose values are inspected by the code are converted to CPU byteorder first. Values which are copied verbatim (relocation fixups) are not swapped to CPU byteorder and back as it is not needed. Signed-off-by: Marcus Comstedt <marcus@mc.pp.se> Cc: Rick Chen <rick@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com>
2019-08-15doc: sifive-fu540: Update README to explicitly load DTB for LinuxAnup Patel
We should explicitly load DTB from TFTP server or MMC/SD card for Linux booting. This will allow us: 1. To use different Linux DTB for SiFive Unleashed board with expansion board connected. 2. Avoid re-flashing OpenSBI firmware whenever board connections change. This patch updates reference bootlog in SiFive FU540 README as-per above. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-15riscv: Access CSRs using CSR numbersBin Meng
We should prefer accessing CSRs using their CSR numbers because: 1. It compiles fine with older toolchains. 2. We can use latest CSR names in #define macro names of CSR numbers as-per RISC-V spec. 3. We can access newly added CSRs even if toolchain does not recognize newly added CSRs by name. This commit is inspired from Linux kernel commit a3182c91ef4e ("RISC-V: Access CSRs using CSR numbers"). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-08-15riscv: Sync csr.h with Linux kernel v5.2Bin Meng
This syncs csr.h with Linux kernel 5.2, and imports asm.h that is required by csr.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2019-08-15riscv : serial: use rx watermark to indicate rx data is presentSagar Shrikant Kadam
In y-modem transfer mode, tstc/getc fail to check if there is any data available / received in RX FIFO, and so y-modem transfer never succeeds. Using receive watermark bit within ip register fixes the issue. This patch is based on commit c7392b7bc4e1 ("Use the RX watermark interrupt pending bit for TSTC") available at[1] [1] https://github.com/sifive/HiFive_U-Boot/tree/regression Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Tested-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Padmarao Begari <padmarao.begari@microchip.com> Tested-by: Padmarao Begari <padmarao.begari@microchip.com>
2019-08-14configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-13Prepare v2019.10-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvellTom Rini
- Various improvements to Keymile boards - mostly DT conversation (Pascal & Holger) - Removal of now unsupported Keymile boards (Pascal & Holger) - Small MVEBU PCI fix (Marek) - Turris Omnia defconfig update (Marek) - Misc Allied Telesis defconfig updates (Chris)
2019-08-12Merge tag 'u-boot-amlogic-20190812' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - amlogic: add support for the SEI Robotic SEI510
2019-08-12Merge branch '2019-08-11-ti-imports'Tom Rini
- More DaVinci updates and fixes - PCIe support on am65x - Watchdog converted to DM - Assorted other bugfixes
2019-08-12Merge branch '2019-08-11-master-imports'Tom Rini
- environment cleanup - HiKey 960 support - Some PCI fixes
2019-08-12gitlab-ci: Consolidate some testsuite jobsTom Rini
We do not need to split binman, buildman, dtoc and patman test suite runs into 3 jobs. Instead, run them as a single job. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12gitlab-ci: Add USER environment variable to buildman/patman testsTom Rini
The way that some of the tests here are designed, they expect USER to be set in the environment. This is not the case in the docker images, so set a reasonable value. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-12arm: K3: sysfw-loader: Do not require full printf() for version infoAndreas Dannenberg
A previous commit... commit 2a51e16bd57a ("configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default") ...causes the System Firmware version string during SPL boot to no longer getting printed to the console as expected. To fix this issue rework the handling of that string to only use basic printf() syntax rather than for example disabling CONFIG_USE_TINY_PRINTF on affected devices, this way maintaining most of the memory size benefit the initial patch brings when it comes to SPL. Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-08-12firmware: ti_sci: Parse all resource ranges even if some is not availableVignesh Raghavendra
Do not fail if any of the requested subtypes are not available, but set the number of resources to 0 and continue parsing the resource ranges. Based on Linux kernel patch by Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-08-12ARM: da850-evm: Enable SPI Flash and NAND Flash when booting NORAdam Ford
Historically there have been various boot options, SPI flash, NAND or NOR. The NOR flash is mutually exclusive with MMC, but it isn't mutually exclusive with NAND or SPI Flash, so this patch enables both NAND flash and SPI Flash when booting from NOR. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12ARM: da850-evm: Enable filesystem commands when booting from NORAdam Ford
The configuration with NOR is mutually exclusive with MMC, and as such, the filesystem commands were disabled. With the USB host enabled, this patch enables the file system command which can be executed on storage devices attached to the USB. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12ARM: da850-evm: Increase environment NOR partition offsetAdam Ford
The current size allocated to U-Boot is 384k, but U-Boot has grown to 436K which means that saving the environmental variables wipes out part of the U-Boot source and the board ceases to function. Due to the sector and erase size for the NOR part and a desire to not have to change partition sizes often, this patch moves the U-Boot environmental variables to an offset of 1M so saveenv does not brick the board. This patch also sets up MTDIDS and MTDPARTS to clearly show where U-Boot and U-Boot's environmental variables are located. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-08-12ARM: da850-evm: Fix Lowlevel initAdam Ford
A previous patch for enabling the NAND config set a flag called CONFIG_SKIP_LOWLEVEL_INIT when it should have been called CONFIG_SKIP_LOWLEVEL_INIT_ONLY. The affect this had was creating a delay on startup for the NOR version which is XIP and doesn't have SPL, so the lowlevel initialization functions need to operate. This delay was not really noticeable at first, but the delays have been getting longer, finally reached the point of nearly seven seconds before the board would appear to start. This patch sets the CONFIG_SKIP_LOWLEVEL_INIT_ONLY instead which means "The normal CP15 init (such as enabling the instruction cache) is still performed" per the README. It doesn't appear to have any adverse behavior on the SPI Flash or the NAND flash boards which use SPL. Fixes: 93f3362762f0 ("ARM: configs: Add da850evm_nand to boot from NAND") Signed-off-by: Adam Ford <aford173@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-13 23:21:55 +0000