summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-02common: Drop linux/crc8.hSimon Glass
We have an existing U-Boot header for the one function that this defines. Use that instead of the linux/ one. Move over the nice comment. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Move random-number functions into their own headerSimon Glass
Create a new rand.h header file and move functions into it, to reduce the size of common.h Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02status_led: Tidy up the code styleSimon Glass
There are a few whitespace problems with this code. Tidy them up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02common: Drop global inclusion of status_led.hSimon Glass
This is only used by a few files so it should not be in the common header. Move it out. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Drop CONFIG_SHOW_ACTIVITYSimon Glass
This feature is not enabled by any board. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-12-02common: Move older CPU functions to their own headerSimon Glass
These should be moved to driver model, but in the meantime, move them out of the common header to help reduce its size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-12-02Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini
- fsl-qoriq : Minor bug fixes and updates on lx2160a, ls1028a, ls1012a, ls1043aqds platforms
2019-12-02Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini
- MIPS: remove Micronas VCT boards
2019-11-29MIPS: remove Micronas VCT boardsDaniel Schwierzeck
The deadline for migration to CONFIG_DM is v2020.01. The VCT baords would need an almost complete rewrite of all drivers to support driver model. Unless someone has access to the hardware and volunteers to do the migration, the board should be scheduled for removal. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
2019-11-29configs: ls1028a: enable CMD_DMAlex Marginean
Since at least some of the drivers relevant to LS1028A are now following DM, it's useful to have dm command enabled by default. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-29board: fsl: lx2160a: Fix the typo in board_fix_fdtPankaj Bansal
Fix a typo that caused incorrect reg-name for pcie node in lx2160a rev2. Fixes: 5d535aa40b ("board: fsl: lx2160a: implement board_fix_fdt") Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-29configs/lx2160a: Add CONFIG_ENV_SECT_SIZE in defconfigPriyanka Jain
Define CONFIG_ENV_SECT_SIZE as 0x20000 in lx2160a related defconfigs: lx2160ardb_tfa_defconfig, lx2160ardb_tfa_SECURE_BOOT_defconfig, lx2160aqds_tfa_defconfig, lx2160aqds_tfa_SECURE_BOOT_defconfig Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-28Merge git://git.denx.de/u-boot-socfpgaTom Rini
- Assorted Gen5 fixes
2019-11-28Merge git://git.denx.de/u-boot-usbTom Rini
- USB keyboard improvements
2019-11-28Merge tag 'mmc-11-27-2019' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mmc - fsl_esdhc update and some cleanup in ls1021a/mpc83xx code - mmc tmio sdhi update for hs400
2019-11-28Merge tag 'u-boot-stm32-20191126' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - Solve warning for stih410-b2260 - Device tree alignment on v5.4-rc4 for all stm32 boards - Correct the eMMC pin configuration on stm32mp157c-ev1 - Add DFU and SPI-NAND support for stm32mp1 board
2019-11-28Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
- powerpc: Fix DM_MMC related build warnings by adding eSDHC device module support for T4240RDB, T2080RDB, T1042D4RDB, T1024RDB, P5040DS, P4080DS, P3041DS, P2041RDB, P2020RDB, P1020RDB platforms
2019-11-27mmc: tmio: sdhi: Add calibration tablesMarek Vasut
Instead of using single fixed value for the calibration offset, add tables which dynamically adjust this per calibration code from the SCC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Skip bad tapsMarek Vasut
Some of the tuning taps produce suboptimal results. Add code which skips those "bad" taps. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Add SCC error checkingMarek Vasut
Check SCC for errors after check command if applicable and optionally adjust the bus skew settings accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Disable auto-retuning in HS400Marek Vasut
Disable the auto-retuning in HS400 mode in favor of manual calibration. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Adjust HS400 calibration offsetsMarek Vasut
Adjust the TMPPORT3 offsets according to the latest information from the chip vendor. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Adjust DT2FF settings for HS400 modeMarek Vasut
Adjust the DT2FF offsets in HS400 according to latest information from the chip vendor. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Use 4 tuning taps on M3W up to ES1.2Marek Vasut
The M3W up to ES1.2 uses 4 tuning taps for HS400, make it so. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Track SMPCMP valu in private dataMarek Vasut
Retain the SMPCMP value from last calibration in private data. This will be later used for skipping bad taps. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mmc: tmio: sdhi: Track current tap number in private dataMarek Vasut
Retain the tap number from last calibration in private data. This will be later used for SCC error checking after each command. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-27mpc83xx: remove unused clock.hYangbo Lu
The clock.h was to define mxc_get_clock() providing clock value to fsl_esdhc driver. Since fsl_esdhc driver is using global data gd->arch.sdhc_clk directly now, we can remove this file. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27arm: drop eSDHC clock getting in mxc_get_clock() for layerscapeYangbo Lu
Although layerscape platforms reuse mxc_get_clock() of i.MX platforms, eSDHC clock getting do not have to use it. It uses global data gd->arch.sdhc_clk directly in fsl_esdhc driver. Even there are more than one eSDHC controllers on SoC, they use same reference clock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27arm: ls1021a: drop redundant board_mmc_init()Yangbo Lu
The board_mmc_init() defined in board files is actually doing same thing with the cpu_mmc_init() defined in arch/arm/cpu/armv7/ls102xa/cpu.c. So drop it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27mmc: fsl_esdhc: get clock directly from global dataYangbo Lu
This patch is to get clock directly from global data. - Remove uclass clk api method. This was what i.MX platforms were using, while QorIQ platforms weren't. - Get clock only from global data, dropping mxc_get_clock(). QorIQ eSDHC controllers on one silicon use same reference clock. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27mmc: sdhci: make sdhci_get_cd staticBaruch Siach
sdhci_get_cd() is not referenced anywhere else. Limit its scope to sdhci.c. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2019-11-27include/configs: ls1012a: add pfe stop commandBiwen Li
This adds pfe stop command before boot linux kernel to fix a problem that ethernet won't be workable after enter linux. Because there is a h/w limitation in LS1012A PFE, to re-initialize PFE it has to be safe shutdown, these steps are done through PFE stop. Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27armv8: ls1043aqds: modify the qspi_bootcmd definitionWen He
Fix the kernel offset of qspi_bootcmd scripts, followed the qoriq_memory_layout definition. Signed-off-by: Wen He <wen.he_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27configs: ls1028a: enable OF_LIBFDT_OVERLAYAlex Marginean
LS1028A QDS board supports multiple combinations of SerDes protocols and multiple add-on cards with Ethernet PHYs. Some of them require specific configuration in Linux DT, and the plan is to use DT overlays for them. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-27armv8: ls1028a: Add environment variables to facilitate the bootYuantian Tang
Add some environment variables to facilitate the auto boot. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-26stm32mp1: add support for virtual partition readPatrick Delaunay
Add read for OTP and PMIC NVM with alternates on virtual DFU device. Serie-cc: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26stm32mp1: board: add spi nand supportPatrick Delaunay
This patch adds the support of the spi nand device in mtdparts command and in dfu_alt_info. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26stm32mp1: configs: activate CONFIG_MTD_SPI_NANDPatrick Delaunay
Activate the support of SPI NAND in stm32mp1 U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26stm32mp1: activate SET_DFU_ALT_INFOPatrick Delaunay
Generate automatically dfu_alt_info for the supported device. The simple command "dfu 0" allows to start the dfu stack on usb 0 for the supported devices: - dfu mtd for nand0 - dfu mtd for nor0 - dfu mmc for SDCard - dfu mmc for eMMC - dfu ram for images in DDR The DUF alternate use the "part", "partubi" and "mmcpart" options to select the correct MTD or GPT partition or the eMMC hw boot partition. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26stm32mp1: activate DFU support and command MTDPatrick Delaunay
Add support of DFU for MMC, MTD, RAM and MTD command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1Patrick Delaunay
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1. - update slew-rate for pin configuration - update "vqmmc-supply" - remove "st,sig-dir" - add mandatory "pinctrl-names" - add "mmc-ddr-3_3v" This patch solve the eMMC detection issue for command "mmc dev 1". Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26ARM: dts: stm32: DT alignment with kernel v5.4-rc4Patrick Delaunay
Device tree and binding alignment with kernel v5.4-rc4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26ARM: dts: stm32: DT alignment with kernel v5.3Patrick Delaunay
Device tree and binding alignment with kernel v5.3 and converted to SPDX. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26configs: stih410-b2260: Enable DM_ETH flagPatrice Chotard
This patch allows to fix the following compilation warning: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. ==================================================== Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-25Merge tag 'rpi-next-2020.01' of https://github.com/mbgg/u-bootTom Rini
- add RPi4 upstream compatible to pinctrl - fix boot banner on RPi3/4 - add support for one binary on RPi3/4
2019-11-25Merge tag 'fixes-for-v2020.01' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix mxsfb regression on pico-imx7d and imx7d-sabre
2019-11-25sandbox: enable USB_KEYBOARD_FN_KEYSHeinrich Schuchardt
Enable the support of function keys on the USB keyboard. This is necessary to test the USB keyboard driver. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25dm: test: usb: rework keyboard testHeinrich Schuchardt
Allow the unit test to pass full 8 byte scan code sequences to the USB keyboard emulation driver and to parse multi-byte escape sequences. The following features are not yet tested: * LED status * caps-lock * num-lock * numerical pad keys The following features are not yet implemented by the USB keyboard driver and therefore not tested: * modifiers for non-alpha-numeric keys, e.g. <SHIFT><TAB> and <ALT><F4> * some special keys, e.g. <PRINT> * some modifiers, e.g. <ALT> and <META> * alternative keyboard layouts Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-25usb: kbd: move USB_KBD_BOOT_REPORT_SIZE to usb.hHeinrich Schuchardt
Move constant USB_KBD_BOOT_REPORT_SIZE. This allows us to reuse it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-11-25usb: kbd: implement special keysHeinrich Schuchardt
Provide support for F1-F12, Insert, Delete, Home, End, Page Up, Page Down. As this leads to a size increase provide a customizing setting CONFIG_USB_KEYBOARD_FN_KEYS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2024-12-28 06:33:48 +0000