summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-11-07rockchip: dts: rk3399-puma: fix the modelling of BIOS_DISABLEPhilipp Tomsich
The fixed regulator for overriding BIOS_DISABLE had been modelling backwards (i.e. the GPIO polarity and the enable-active-low/high property had both been inverted), causing the 'regulator' command to always print/expect 'disabled'/'enabled' backwards. This fixes the mix-up and models it correctly: * the GPIO is low-active * the regulator should be enabled (enable-active-high) during boot-on initialisation Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
2017-11-07rockchip: config: use common CONFIG_ENV_SIZE for all SoCsKever Yang
All Rockchip SoCs use 32KB as CONFIG_ENV_SIZE. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07rockchip: config: sync the ENV offset from rockchip legacy U-BootKever Yang
Using the ENV offset from rockchip legacy U-Boot for all SoCs, the offset is 4MB-32KB Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-07rockchip: rock: remove CONFIG_ENV_OFFSETKever Yang
We use the same default ENV setting in rockchip_common.h for all SoC. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-06Prepare v2017.11-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-06cosmetic: rmobile: renesas spelled wrongChris Brandt
Renesas was spelled wrong. Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
2017-11-06Do not attempt to use the systemwide libfdtJan Kundrát
U-Boot bundles a patched copy of libfdt, so it's wrong to attempt to include it <like/this>. This breaks the build for me when I have dtc fully installed in my host -- as happened earlier tonight with Buildroot, for example. There are several other occurrences throughout the code where '<libfdt' matches. I'm not modifying these because I have no clue why the <systemwide> include style is being used -- IMHO wrongly. Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
2017-11-06m68k: doc: update outdated documentationAngelo Dureghello
Update m68k documentation to reflect the current ColdFire architecture support status. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2017-11-06disk: part_dos: fix part_get_info_extended() functionShawn Guo
The check in part_get_info_extended() for a successful partition searching misses a condition for extended partition. In case of (ext_part_sector == 0), we should anyway mark the partition as found, even if it's an extended partition, i.e. (is_extended(pt->sys_ind) == 0). Otherwise, the extended partition (type 0x0f) will never be identified, and the following recursive call to part_get_info_extended() will get a wrong 'part_num' and 'which_part' parameter. In the end, all those partitions in extended table will not be identified. Let's add the missing OR condition of (ext_part_sector == 0) for is_extended() check to fix the problem. The issue is discovered by running fastboot flash to an extended partition on eMMC. $ fastboot flash mmcsda5 cache.img target reported max download size of 536870912 bytes sending 'mmcsda5' (18796 KB)... OKAY [ 2.144s] writing 'mmcsda5'... FAILED (remote: cannot find partition) finished. total time: 2.261s Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2017-11-06gpt: Use cache aligned buffers for gpt_h and gpt_eLukasz Majewski
Before this patch one could receive following errors when executing "gpt write" command on machine with cache enabled: display5 factory > gpt write mmc ${mmcdev} ${partitions} Writing GPT: CACHE: Misaligned operation at range [4ef8f7f0, 4ef8f9f0] CACHE: Misaligned operation at range [4ef8f9f8, 4ef939f8] CACHE: Misaligned operation at range [4ef8f9f8, 4ef939f8] CACHE: Misaligned operation at range [4ef8f7f0, 4ef8f9f0] success! To alleviate this problem - the calloc()s have been replaced with malloc_cache_aligned() and memset(). After those changes the buffers are properly aligned (with both start address and size) to SoC cache line. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2017-11-06tools: image: fix message when fail to add verification data for configMasahiro Yamada
This function is called when signing configuration nodes. Adjust the error message. I do not know why we do not need to show the error message in case of ENOSPC. Remove the if-conditional that seems unnecessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06tools: image: allow to sign image nodes without -K optionMasahiro Yamada
If -K option is missing when you sign image nodes, it fails with an unclear error message: tools/mkimage Can't add hashes to FIT blob: -1 It is hard to figure out the cause of the failure. In contrast, when you sign configuration nodes, -K is optional because fit_config_process_sig() returns successfully if keydest is unset. Probably this is a preferred behavior when you want to update FIT with the same key; you do not have to update the public key in this case. So, this commit changes fit_image_process_sig() to continue signing without keydest. If ->add_verify_data() fails, show a clearer error message, which has been borrowed from fit_config_process_sig(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06tools: image: fix "algo" property of public key for verified bootMasahiro Yamada
The "algo_name" points to a property in a blob being edited. The pointer becomes stale when fit_image_write_sig() inserts signatures. Then crypto->add_verify_data() writes wrong data to the public key destination. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-06test/py: regenerate persistent GPT image if code changesStephen Warren
test_gpt generates a persistent disk image which can be re-used across multiple test runs. Currently, if the Python code that generates the disk image change, the image is not regenerated, which could cause test failures e.g. if a test was updated to expect some new partition name or size, yet the persistent disk image contained the old name or size. This change introduces functionality to regenerate the disk image if the instructions to generate the image have changed. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2017-11-06tools: env: allow to print U-Boot versionStefan Agner
The fw_env utility family has a default environment compiled in which ties it quite strongly to the U-Boot source/config it has been built with. Allow to display the U-Boot version it has been built with using the -v/--version argument. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2017-11-06image-sig: use designated initializers for algorithmMasahiro Yamada
Designated initializers are more readable because we do not have to check the order in the struct definitions. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-06MAINTAINERS: Add missing boards and config entriesTom Rini
As part of my usual round of build testing, output about missing MAINTAINERS information was not logged, and thus often overlooked. Correct that mistake by ensuring that I log the output of genboardscfg.py every time. As part of that, address a number of missing MAINTAINERS entires. In the case of a missing file, I have put the original submitter down. In the rest of the cases I have added the config (and sometimes relevant header file) to the existing set of file globs. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-06tpm: st33zp24: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights header Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06spear: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for SPEAR related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06stv0991: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STV0991 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06stm32: fix STMicroelectronics copyrightPatrice Chotard
Uniformize STMicroelectronics copyrights headers for STM32 related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06sti: fix STMicroelectronics copyrightPatrice Chotard
Uniformize all STMicroelectronics copyrights headers for STi related code. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-11-06Merge git://git.denx.de/u-boot-samsungTom Rini
2017-11-06ARM: dts: exynos: fix property values of LDO15/17 for ODROID-XU3/4Dongjin Kim
Looking at the schematic, LDO15 and LDO17 are tied as a power source of a builtin network chipset. The voltage on LDO15 is corrected to 3.3V and the name of LDO17 is corrected to "vdd_ldo17". Signed-off-by: Dongjin Kim <tobetter@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-11-05Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULTTom Rini
We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-11-03Merge tag 'xilinx-fixes-for-v2017.11' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx fix for v2017.11 - Fix ceva sata initialization
2017-11-03scsi: ceva: Start port in probeMichal Simek
The patch: "dm: ahci: Unwind the confusing init code" (sha1: 7cf1afce7fa3fe64189020fe14b93f7326dd0758) introduce bug for ceva sata because port didn't start. On the other hand the dwc_ahci.c was fixed correctly. Do the same change for ceva too. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
2017-11-01Merge git://git.denx.de/u-boot-rockchipTom Rini
2017-11-01rockchip: lion-rk3368: defconfig: select PHY_MICREL_KSZ90X1Philipp Tomsich
The RK3368-uQ7 uses a KSZ9031 PHY on-module. Enable PHY_MICREL_KSZ90X1 in the associated defconfig. References: da3b9e7f ("Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: puma-rk3399: defconfig: select PHY_MICREL_KSZ90X1Philipp Tomsich
The RK3368-uQ7 uses a KSZ9031 PHY on-module. Enable PHY_MICREL_KSZ90X1 in the associated defconfig (this somehow got lost with da3b9e7f). References: da3b9e7f ("Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: evb-rk3328: remove CONFIG_ENV_OFFSETKever Yang
Remove CONFIG_ENV_OFFSET for there already have one in rockchip_common.h Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: rk3328: fix rockchip_get_cru apiKever Yang
The API for get priv pointer is wrong, fix it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: rk3399: init CPU clock when rkclk_init()Kever Yang
Init the CPU and its buses to speed up the boot time. Move rkclk_init() to a place after rk3399_configure_cpu has defined at the same time, or else there will be a warning. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: configs: only add available BOOT_TARGET_DEVICESKlaus Goger
BOOT_TARGET_DEVICES should only be added if the corresponding u-boot command is enabled. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-11-01rockchip: configs: use rockchip-common.h for rk3368Klaus Goger
rockchip-common.h already defines values that are missing from rk3368_common.h For example BOOT_TARGET_DEVICES was defined empty and therefore distroboot had no boot targets. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-10-31Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2017-10-31mx6slevk: Call gpio_request()Fabio Estevam
We should call gpio_request() prior to reading the GPIO value. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-31udoo: Remove cpu type check prior to setup_sata()Fabio Estevam
Inside setup_sata() there is a cpu type check, so there is no need to do this check in the board file. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-10-31wandboard: Remove cpu type check prior to setup_sata()Fabio Estevam
Inside setup_sata() there is a cpu type check, so there is no need to do this check in the board file. This also brings the benefit to allowing setup_sata() to be called for the mx6qp wandboard variant. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-10-31ARM: imx6: Enable UMS and DFU on DHCOM i.MX6 PDKMarek Vasut
Enable UMS and DFU, so that the eMMC can be accessed via the USB gadget port on the board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2017-10-31imx: mx6slevk: cleanup board usb codePeng Fan
Since DM_USB enabled, no need the usb code in board file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-31mx6slevk: Fix MMC breakage for the SPL targetFabio Estevam
Commit 001cdbbb32ef1f6 ("imx: mx6slevk: enable more DM drivers") breaks MMC support in U-Boot proper on the mx6slevk_spl_defconfig target: U-Boot SPL 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18) Trying to boot from MMC1 U-Boot 2017.09-00396-g6ca43a5 (Oct 01 2017 - 16:20:18 -0300) CPU: Freescale i.MX6SL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 33C Reset cause: POR Board: MX6SLEVK I2C: ready DRAM: 1 GiB MMC: FSL_SDHC: 0 MMC Device 1 not found *** Warning - No MMC card found, using default environment As mx6slevk_spl_defconfig does not use CONFIG_DM_MMC and its board file does not register the mmc controller for U-Boot proper, let's fix this by adding CONFIG_DM_MMC=y and device tree support. While at it, add more DM drivers, so that it becomes closer to mx6slevk_defconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-31wandboard: Add support for the MX6QP variantFabio Estevam
Add support for the latest MX6QP wandboard variant. Based on Richard Hu's work from Technexion's U-Boot tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-31configs: vf610: increase maximum size and enforce correct limitStefan Agner
On Vybrid SoCs U-Boot gets loaded into GFX SRAM which is 512KiB. Currently 32KiB is reserved for the IMX header. However, this is not reflected in the size limit. In v2017.11-rc2 the actual size limit (512KiB-32KiB) has been reached for Colibri VF61, which lead to a successful build of U-Boot but not a working binary. The IMX header is much smaller than 32KiB, typically around 1KiB. Decrease the reserved size to 4KiB and specify the correct U-Boot size limit. Apply this new base address and limit for all Vybrid based boards. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2017-10-30Prepare v2017.11-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-30net: fec_mxc: Change "error frame" message to debug levelFabio Estevam
As reported by Jonathan Gray: "After the recent changes to add SimpleNetworkProtocol to efi_loader when booting off mmc via an efi payload that doesn't use SimpleNetworkProtocol U-Boot's fec_mxc driver will now display various "error frame" messages. .... MMC Device 1 not found MMC Device 2 not found MMC Device 3 not found Scanning disks on sata... Found 6 disks reading efi/boot/bootarm.efi 67372 bytes read in 32 ms (2 MiB/s) ## Starting EFI application at 12000000 ... >> OpenBSD/armv7 BOOTARM 1.0 error frame: 0x8f57ec40 0x00003d74 error frame: 0x8f57ec40 0x00007079 error frame: 0x8f57ec40 0x00006964 error frame: 0x8f57ec40 0x00006f6f error frame: 0x8f57ec40 0x0000726f error frame: 0x8f57ec40 0x00002074 error frame: 0x8f57ec40 0x00006f6f" Heinrich Schuchardt explains: "A receive FIFO overrun can be expected if network packages are not processed. With the network patches we check if a package is available quite often." Move the "error frame" messages to debug level so that a clean output log can be seen. Reported-by: Jonathan Gray <jsg@jsg.id.au> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-10-30imx: Fix regression with CONFIG_DM_MMC=yFabio Estevam
When CONFIG_DM_MMC=y, CONFIG_BLK should be selected, otherwise the SD/eMMC card cannot be used. Also, select CONFIG_DM_USB=y when CONFIG_USB=y to avoid build failure. Tested on mx6slevk, mx7dsabresd and mx6ullevk. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Adam Ford <aford173@gmail.com> Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Tested-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2017-10-30configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-29scripts/get_maintainer.pl: enable find_maintainer_filesHeinrich Schuchardt
Many MAINTAINERS files are in subdirectories. We should enable searching these. Reported-by: Walt Feasel <waltfeasel@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2017-10-29checkpatch: Support wide stringsHeinrich Schuchardt
Allow prefixing typical strings with L for wide strings Patch originally by Joe Perches https://lkml.org/lkml/2017/10/17/1117 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
generated by cgit (git 2.34.1) at 2025-01-03 21:25:40 +0000