summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-08-18ARM: tegra: Disable VPRBryan Wu
On Tegra114 and Tegra124 platforms, certain display-related registers cannot be accessed unless the VPR registers are programmed. For bootloader, we probably don't care about VPR, so we disable it (which counts as programming it, and allows those display-related registers to be accessed). This patch is based on the commit 5f499646c83ba08079f3fdff6591f638a0ce4c0c in Chromium OS U-Boot project. Signed-off-by: Andrew Chew <achew@nvidia.com> Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com> Signed-off-by: Bryan Wu <pengw@nvidia.com> [acourbot: ensure write went through, vpr.c style changes] Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <TWarren@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Terje Bergstrom <tbergstrom@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2014-08-09Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-08-06Prepare v2014.10-rc1Tom Rini
Signed-off-by: Tom Rini <trini@ti.com>
2014-08-06Change Andy Fleming's email addressAndy Fleming
Messages to afleming@freescale.com now bounce, and should be directed to my personal address at afleming@gmail.com Signed-off-by: Andy Fleming <afleming@gmail.com>
2014-08-06The _config target is not present anymore, mention _defconfig insteadHolger Freyther
The _config part is gone for sure, the _defconfig target could at least work. I have not verified this for all targets though.
2014-08-06git-mailrc: add a kconfig aliasStephen Warren
It's easier to Cc Masahiro on Kconfig-related changes with a git-mailrc alias. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-06doc: README.SPL: adjust for Kbuild and KconfigMasahiro Yamada
Reflect the latest build system to doc/README.SPL. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-06doc: delete README.ARM-SoCMasahiro Yamada
This document is too old and useless. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2014-08-06Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2014-08-06Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini
2014-08-06spi, spi_mxc: do not hang in spi_xchg_singleHeiko Schocher
if status register do never set MXC_CSPICTRL_TC, spi_xchg_single endless loops. Add a timeout here to prevent endless hang. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Dirk Behme <dirk.behme@gmail.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-08-06spi: Support half-duplex mode in FDT decodeSimon Glass
This parameter should also be supported. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-08-06exynos: spi: Fix calculation of SPI transaction start timeSimon Glass
The SPI transaction delay is supposed to be measured from the end of one transaction to the start of the next. The code does not work that way, so fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-08-06cros_ec: Fix two bugs in the SPI implementationSimon Glass
An incorrect message version is passed to the EC in some cases and the parameters of one function are switched. Fix these problems. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-08-06sf: sf_ops: Stop leaking memoryMarek Vasut
It's usually a common pattern to free() the memory that we allocated. Implement this here to stop leaking memory. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-08-04Merge http://git.denx.de/u-boot-dmTom Rini
2014-08-04arm: Support pre-relocation malloc()Simon Glass
Add support for re-relocation malloc() in arm's start-up code. Signed-off-by: Simon Glass <sjg@chromium.org>
2014-08-04arm: Set up global data before board_init_f()Simon Glass
At present arm defines CONFIG_SYS_GENERIC_GLOBAL_DATA, meaning that the global_data pointer is set up in board_init_f(). However it is actually set up before this, it just isn't zeroed. If we zero the global data before calling board_init_f() then we don't need to define CONFIG_SYS_GENERIC_GLOBAL_DATA. Make this change (on arm32 only) to simplify the init process. I don't have the ability to test aarch64 yet. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Tom Rini <trini@ti.com>
2014-08-01kmp204x: prepare to use CPU watchdogBoschung, Rainer
This patch configures the qrio to trigger a core reset on a CPU reset request. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01kmp204x/qrio: support for setting the CPU reset request modeBoschung, Rainer
To acheive this, the qrio_uprstreq() function that sets the UPRSTREQN flag in the qrio RESCNF reg is added. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01kmp204x: set CPU watchdog reset reason flagBoschung, Rainer
Check the core timer status register (TSR) for watchdog reset, and and set the QRIO's reset reason flag REASON1[0] accordingly. This allows the appliction SW to identify the cpu watchdog as a reset reason, by setting the REASON1[0] flag in the QRIO. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01kmp204x/qrio: prepare support for the CPU watchdog reset reasonBoschung, Rainer
To achieve this, the qrio_cpuwd_flag() function that sets the CPU watchdog flag in the REASON1 reg is added. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01kmp204x: CPU watchdog enabledBoschung, Rainer
The booting of the board is now protected by the CPU watchdog. A failure during the boot phase will end up in board reset. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01powerpc: mpc85xx watchdog init added to init_funcBoschung, Rainer
When CONFIG_WATCHDOG is defined the board initialization just performs a WATCHDOG_RESET, an initialization of the watchdog is not done. This has been modified fot the MPC85xx, the board initialization calls its watchdog initialitzation allowing for full watchdog configuration very early in the boot phase. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01mpc85xx: watchdog initialisation addedBoschung, Rainer
Function to inititialize the cpu watchdog added. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> [York Sun: Add prototype in watchdog.h] Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01powerpc: macros for e500mc timer regs addedBoschung, Rainer
For e500mc cores the watchdog timer period has to be set by means of a 6bit value, that defines the bit of the timebase counter used to signal a watchdog timer exception on its 0 to 1 transition. The macro used to set the watchdog period TCR_WP, was redefined for e500mc to support 6 WP setting. The parameter (x) given to the macro specifies the prescaling factor of the time base clock (fTB): watchdog_period = 1/fTB * 2^x Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01mpc85xx: fix interrupt init to not affect watchdogBoschung, Rainer
TCR watchdog bit are overwritten when dec interrupt is enabled. This has been fixed with this patch. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-08-01env_mmc: support env partition setup in runtimeDmitry Lifshitz
Add callback with __weak annotation to allow setup of environment partition number in runtime from a board file. Propagate mmc_switch_part() return value into init_mmc_for_env() instead of -1 in case of failure. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01env_mmc: add mmc_get_env_addr() prototypeDmitry Lifshitz
Add missing mmc_get_env_addr() prototype in environment.h Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01MMC: atmel_mci: enable high speed mode supportBo Shen
If the MCI IP version >= 0x300, it supports hight speed mode option, this patch enable it. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01MMC: atmel_mci: add configuration register definitionBo Shen
Add configuration register definition, this register only exists on MCI IP version >= 0x300. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01MMC: atmel_mci: refactor setting the mode registerBo Shen
The mode register is different between MCI IP version. So, according to MCI IP version to set the mode register. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01mmc/dw_mmc: Fix clock divider calculation error for bypass modeChin Liang See
To fix the clock divider calculation error when the controller clock same as the operating frequency. This is known as bypass mode. In this mode, the divider should be 0. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Mischa Jonker <mjonker@synopsys.com>
2014-08-01mmc: s3c: Add SD driverMarek Vasut
Implement SD driver for the S3C24xx family. This implementation is currently only capable of using the PIO transfers, DMA is not supported. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01arm: s3c: Unify the S3C24xx SDI structureMarek Vasut
Unify the register structure so they can be easily used across all of S3C24xx lineup. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-08-01bcm2835_sdhci: Add SDHCI_QUIRK_NO_HISPD_BIT flagLubomir Rintel
Seems like the controller doesn't support the flag. None of the hi-speed cards I've tried could be read, while they successfully worked with the quirk enabled. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2014-08-01ARM: kirkwood: add mvsdio driverDrEagle
This patch add Marvell kirkwood MVSDIO/MMC driver and enable it for Sheevaplugs and OpenRD boards. Signed-off-by: Gerald Kerma <drEagle@doukki.net> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
2014-07-31sun7i: Add bananapi boardHans de Goede
The Banana Pi is an A20 based development board using Raspberry Pi compatible IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi and stereo audio out + various expansion headers: http://www.lemaker.org/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sunxi: HYP/non-sec: configure CNTFRQ on all CPUsMarc Zyngier
CNTFRQ needs to be properly configured on all CPUs. Otherwise, virtual machines hoping to find valuable information on secondary CPUs will be disapointed... Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-07-31sunxi: HYP/non-sec: add sun7i PSCI backendMarc Zyngier
So far, only supporting the CPU_ON method. Other functions can be added later. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-07-31sun7i: Add support for a number of new sun7i boardsHans de Goede
Add support for boards which I own and which already have a dts file in the upstream kernel. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sun5i: Add support for a number of new sun5i boardsHans de Goede
Add support for boards which I own and which already have a dts file in the upstream kernel. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sun4i: Add support for a number of new sun4i boardsHans de Goede
Add support for boards which I own and which already have a dts file in the upstream kernel. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sunxi: Add CONFIG_MACPWR optionHans de Goede
On some boards the ethernet-phy needs to be powered up through a gpio, add support for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sunxi: Enable EHCI on various sunxi boardsHans de Goede
Most sunxi boards have the EHCI controller hooked up, enable it on all relevant boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sun5i: add USB EHCI settingsHans de Goede
Specific USB EHCI settings to be set for sun5i if CONFIG_USB_EHCI is enabled. Note we don't specify default VBUS gpio pins for sun5i since they vary too much from board to board. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31sun4i: add USB EHCI settingsHans de Goede
Specific USB EHCI settings to be set for sun4i if CONFIG_USB_EHCI is enabled. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2014-07-31cubieboard2: Enable AXP209 power controllerIan Campbell
Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-07-31sun7i: cubietruck: enable USB EHCIRoman Byshko
Cubietruck has two USB host controllers. This makes them usable by enabling the EHCI driver for them. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Also enable ehci for Cubietruck_FEL] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2014-07-31sun7i: add USB EHCI settingsRoman Byshko
Specific USB EHCI settings to be set for sun7i if CONFIG_USB_EHCI is enabled. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> [hdegoede@redhat.com: Use SUNXI_GPH macro for SUNXI_USB_VBUS#_GPIO] [hdegoede@redhat.com: Add #ifndef SUNXI_USB_VBUS#_GPIO to allow override of the default pins from boards.cfg] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit (git 2.34.1) at 2024-12-27 03:47:16 +0000