summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-30doc: integrate UEFI documentation into Sphinx toctreeHeinrich Schuchardt
Change the UEFI documentation to Sphinx style and integrate it into the rest of the Sphinx generated documentation. Remove the inaccurate TODO list in doc/uefi/uefi.rst. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: efidebug.c function documentationHeinrich Schuchardt
make htmldocs produces a warning: ./cmd/efidebug.c:733: WARNING: Unexpected indentation. Correct the indentation. Remove 'See above for details of sub-commands.' which is not helpful in the Sphinx generated documentation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: always rebuild efi_crt0.oHeinrich Schuchardt
When changing the architecture without calling 'make clean' a subsequent make fails with lib/efi_loader/efi_crt0.o: file not recognized: File format not recognized Force efi_crt0.o to be always rebuild. Reported-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30efi_loader: re-enable GRUB workaround on 32bit ARMHeinrich Schuchardt
GRUB on ARM 32bit prior to version 2.04 lacks proper handling of caches. In U-Boot v2019.04 a workaround for this was inadvertently removed. The workaround is currently also needed for booting on systems with caches that cannot be managed via CP15 (e.g. with an i.MX6 CPU). Re-enable the workaround and make it customizable. Fixes: f69d63fae281 ("efi_loader: use efi_start_image() for bootefi") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-07-30arm64: zynqmp: Do not include pm_cfg_obj.o when SPL is disabledMichal Simek
xilinx_zynqmp_mini configuration is throwing build error: readlink: missing operand Try 'readlink --help' for more information. because CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE is not defined at all and Makefile pass ifneq condition. Add SPL_BUILD dependency which is also reflected in Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30mxc_ipuv3_fb.c: enable a backlight on a panelHeiko Schocher
check if we get a panel device, if so, enable the backlight on it. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30mxc_ipuv3_fb.c: call display_enableHeiko Schocher
call display_enable, so a display gets enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30bdinfo: show fb base with DM_VIDEOHeiko Schocher
show Framebuffer base with CONFIG_DM_VIDEO enabled. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30mxc_ipuv3_fb.c: set gd->fb_baseHeiko Schocher
set gd->fb_base so it can be shown with bdinfo command. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30global_data: enable fb_base for DM_VIDEOHeiko Schocher
with CONFIG_VIDEO we store fb base address in global data fb_base variable. Do this also in DM_VIDEO case. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-07-30cmd: fpga: Change return value to avoid printing usage textAlexander Dahl
In cmd/fpga.c the commands should return enum command_ret_t, e.g. CMD_RET_USAGE, CMD_RET_SUCCESS, or CMD_RET_FAILURE. What they actually do is passing a return value from different 'fpga_' functions. Passing on a return value of -1 from a called function leads to printing out usage text. In case of actually correct usage with correctly specified parameters but some fail at runtime printing out that usage text is distracting. The reason is most 'fpga_' functions return either FPGA_SUCCESS or FPGA_FAIL, the latter was equal to -1 which is the same value as CMD_RET_USAGE. So just passing on FPGA_FAIL lead to printing out usage. We should only return CMD_RET_USAGE in cases, where the user sent wrong input. Every other case should return CMD_RET_SUCCESS or CMD_RET_FAILURE, and not simply pass an error code. Simply changing FPGA_FAIL from -1 to 1 gets the job done. Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Check function pointer before callingAlexander Dahl
As already done for the 'pre' function, a check is added to not follow a NULL pointer, if somebody has not assigned a 'post' function. Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix indentationAlexander Dahl
Some code parts stood too far left … Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: cyclon2: Fix most checkpatch warningsAlexander Dahl
Nothing special, but done before further cleanup. * spacing * braces * __FUNCTION__ → __func__ Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30fpga: altera: Add some more device sizesAlexander Dahl
There seems to be only one place, where this is checked against: `altera_validate()`. It should be non zero. Otherwise it is only used to display it, so it probably does not really matter at the moment. But we had the datasheet open anyway … Sizes in datasheet are bit counts, display here is in bytes. Signed-off-by: Alexander Dahl <ada@thorsis.com>
2019-07-30arm64: zynqmp: add MAINTAINERS entry for Avnet UltraZed-EVLuca Ceresoli
The board was added without adding a MAINTAINERS entry. Fixes: $ ./tools/genboardscfg.py -f WARNING: no status info for 'avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0' WARNING: no maintainers for 'avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0' $ Reported-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Add slave serial programming supportRobert Hancock
This adds support for slave serial programming, in addition to the previously supported slave SelectMAP mode. There are two ways that this can be used: -Using the clk and wdata callbacks in order to write image data one bit at a time using pure bit-banging. This works, but is rather painfully slow with typical image sizes. -By specifying the wbulkdata callback instead, the image loading process can be offloaded to SPI hardware. In this mode the clk and wdata callbacks do not need to be specified. This allows the image to be loaded much faster, taking only a few seconds with even relatively large images. Slave serial programming has been tested on the Kintex-7 series of FPGAs. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Add additional clock cycles after DONE assertionRobert Hancock
Some Xilinx FPGA configuration options can result in the startup sequence extending past the end of the FPGA bitstream. Continue applying CCLK clock cycles for 8 cycles after DONE is asserted in order to ensure the startup sequence is complete, as recommended by Xilinx. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: Split out image writing from pre/post operationsRobert Hancock
This is in preparation for adding slave serial programming support, which uses the same pre/post operations as slave SelectMAP, to avoid duplicating code. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: added Kconfig optionRobert Hancock
Add an option to allow this driver to be selected with Kconfig. As noted in the description, this driver should also work with many newer Xilinx FPGA families as the programming methods are essentially the same. Also added a missing FPGA_XILINX dependency to the similar Spartan 3 driver. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30fpga: virtex2: cosmetic: Cleanup code styleRobert Hancock
Address Checkpatch warnings in virtex2 code prior to making other changes. No functional change intended. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: add support for Avnet UltraZed-EV Starter KitLuca Ceresoli
Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the only publicly-available compatible carrier card. The SoM is based on the EV version of the Xilinx ZynqMP SoC+FPGA. The psu_init_gpl.c file has been generated from the board definition files at [0] using Vivado 2018.3 and then minimized by tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since it is not mentioned in device tree and fixed a checkpatch error. [0] https://github.com/Avnet/bdf/tree/3686c9ff7d2f0467fb4fcf39f861b8d6ff183b12/ultrazed_7ev_cc/1.1 Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30tools: zynqmp_psu_init_minimize.sh: fix return lines coding styleLuca Ceresoli
Remove unneeded parenthess around return value. E.g.: return (0); -> return 0; Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30ARM: zynq: Add configuration for Z-turn boardAnton Gerasimov
Basic (PS-only) configuration based on Vivado board files by Sergiusz Bazanski <sergius@q3k.org> Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2019-07-30cmd: fpga: correct typo, capitalize "Xilinx"Robert P. J. Day
A couple minor tweaks to printed strings in cmd/fpga.c. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: add tool to minimize psu_init_gpl.c filesLuca Ceresoli
This script transforms a pair of psu_init_gpl.c and .h files produced by the Xilinx Vivado tool for ZynqMP into a smaller psu_init_gpl.c file that is almost checkpatch compliant. Based on a script by Michal Simek. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: xil_io.h: declare functions as staticLuca Ceresoli
Fixes sparse warnings when building zynqmp defconfigs: ./board/xilinx/zynqmp/xil_io.h:12:6: warning: symbol 'Xil_Out32' was not declared. Should it be static? ./board/xilinx/zynqmp/xil_io.h:17:5: warning: symbol 'Xil_In32' was not declared. Should it be static? ./board/xilinx/zynqmp/xil_io.h:22:6: warning: symbol 'usleep' was not declared. Should it be static? Also add __maybe_unused to usleep() since it is not used by minimized psu_init_gpl.c files, so it would warn as "defined but not used". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: add tool to convert PMU config object .c to binaryLuca Ceresoli
The recently-added ZYNQMP_SPL_PM_CFG_OBJ_FILE option allows SPL to load a PMUFW configuration object from a binary blob. However the configuration object is produced by Xilinx proprietary tools as a C source file and no tool exists to easily convert it to a binary blob in an embedded Linux build system for U-Boot to use. Add a simple Python script to do the conversion. It is definitely not a complete C language parser, but it is enough to parse the known patterns generated by Xilinx tools, including: - defines - literal integers, optionally with a 'U' suffix - bitwise OR between them Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: spl: install a PMU firmware config object at runtimeLuca Ceresoli
Optionally allow U-Boot to load a configuration object into the Power Management Unit (PMU) firmware on Xilinx ZynqMP. The configuration object is required by the PMU FW to enable most SoC peripherals. So far the only way to boot using U-Boot SPL was to hard-code the configuration object in the PMU firmware. Allow a different boot process, where the PMU FW is equal for any ZynqMP chip and its configuration is passed at runtime by U-Boot SPL. All the code for Inter-processor communication with the PMU is isolated in a new file (pmu_ipc.c). The code is inspired by the same feature as implemented in the Xilinx First Stage Bootloader (FSBL) and Arm Trusted Firmware: * https://github.com/Xilinx/embeddedsw/blob/fb647e6b4c00f5154eba52a88b948195b6f1dc2b/lib/sw_apps/zynqmp_fsbl/src/xfsbl_misc_drivers.c#L295 * https://github.com/ARM-software/arm-trusted-firmware/blob/c48d02bade88b07fa7f43aa44e5217f68e5d047f/plat/xilinx/zynqmp/pm_service/pm_api_sys.c#L357 SPL logs on the console before loading the configuration object: U-Boot SPL 2019.07-rc1-00511-gaec224515c87 (May 15 2019 - 08:43:41 +0200) Loading PMUFW cfg obj (2008 bytes) EL Level: EL3 ... Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-30arm64: zynqmp: Rename zc1275 to zcu1275Michal Simek
Name of this platform has changed and released to customers that's why name has also changed. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: uboot
2019-07-30ARM: zynq: delete long-dead CONFIG_USB_CABLE_CHECKRobert P. J. Day
This Kbuild option disappeared way back in 2014: commit 75504e9592745021006cb8905b5ff5a51d9d1cb3 Author: Mateusz Zalega <m.zalega@samsung.com> Date: Wed Apr 30 13:07:48 2014 +0200 ... snip ... CONFIG_USB_CABLE_CHECK was removed. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-07-29Prepare v2019.10-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-29Merge tag 'dm-pull-29jul19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for replacing files
2019-07-29Merge branch '2019-07-29-ti-imports'Tom Rini
- More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
2019-07-29arm: mach-keystone: Use appended original image size in image processingAndrew F. Davis
When an image is signed/encrypted on K2 devices the image may get padded to meet alignment requirements for the signature/encryption type. The original size is appended as 4 bytes little-endian to the end of the final image. Normally the trailing extra bytes are ignored and so restoring the exact original size is not important. In the case of initrd the original size is important as the kernel uses it to look for additional filesystem data and can do the wrong thing when the size is not correct. Read off the original size and report it back from the image post processing stage. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-07-29configs: omapl138_lcdk: enable NAND self-init in SPLBartosz Golaszewski
Now that we have enabled the driver-model in SPL, we can remove the code disabling NAND self-init in SPL from the config include for omapl138-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: omapl138-lcdk: enable driver-model in SPLBartosz Golaszewski
Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: omapl138-lcdk: remove unneeded includesBartosz Golaszewski
There's no SPI on da850-lcdk. Remove unnecessary includes. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTFBartosz Golaszewski
We're working towards enabling the driver-model in SPL for da850-lcdk. Enable CONFIG_USE_TINY_PRINTF in defconfig to reduce SPL size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLEBartosz Golaszewski
We're working towards enabling the driver model in SPL for da850-lcdk. Enable SPL_SYS_MALLOC_SIMPLE in defconfig to reduce SPL size. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29davinci: da850-evm: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
2019-07-29davinci: omapl138-lcdk: enable driver model for NANDBartosz Golaszewski
Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: add support for driver modelBartosz Golaszewski
Extend the davinci NAND driver to support the driver model. For now this doesn't add any device-tree parsing due to the fact that we can't access the actual nand node on the device-tree - it's a subnode of the aemif device and we don't have an aemif driver on davinci at the moment. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29nand: davinci: make davinci_nand_init() staticBartosz Golaszewski
This function is only used within the driver itself. No need to export it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-29omapl138_lcdk_defconfig: don't build support for SPIBartosz Golaszewski
The following warning is emited when building u-boot for da850-lcdk: ===================== WARNING ====================== This board does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no dm conversion and v2019.07 for partially dm converted drivers. Failure to update can lead to driver/board removal See doc/driver-model/MIGRATION.txt for more info. ==================================================== ===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== While we could fix it by selecting CONFIG_DM_SPI, there's no need to build it at all as SPI is disabled on da850-lcdk. Remove all unneeded options from the defconfig. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29i2c: remove i2c driver-model compatibility layerBartosz Golaszewski
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon remove it altogether. Stop building it in sandbox mode. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29davinci: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski
This option is no longer used on any davinci board but still selected in defconfigs which causes the following warning: ===================== WARNING ====================== This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list. ==================================================== Remove all references to CONFIG_DM_I2C_COMPAT from davinci. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29ARM: da850_am18xxevm: Remove config and referencesAdam Ford
This board has been abandonded for a while. I do not have this hardware and nobody has appeared to notice and/or care that it's orphaned. Since much of this code is inserted into the da850evm code base, removing it from support will make da850evm support easier going forward. This patch removes the da850_am18xxevm_defconfig, README references to this board and the reference to this board from the MAINTAINERS list. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-07-29edid: fix edid_get_timing_validate() mode_valid lookupNeil Armstrong
Add a condition to the break in the modes lookup, without this when the first mode is not valid, then edid_get_timing_validate() return an error instead of checking the next modes. Fixes: 1c1ed441b0d1 ("edid: add edid_get_timing_validate() variant to filter out edid modes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
generated by cgit (git 2.34.1) at 2024-12-28 11:05:25 +0000