summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-07mpc8260/i2c.c: replace PRINTD() by debug()Wolfgang Denk
This also fixes some GCC 4.6 build warnings like: i2c.c: In function 'i2c_init': i2c.c:221:26: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] i2c.c:221:19: warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8260/i2c.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Also accept some other harmless checkpatch warnings. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8220/fec.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: fec.c: In function 'mpc8220_fec_recv': fec.c:733:8: warning: variable 'frame' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07common/cmd_i2c.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: cmd_i2c.c: In function 'do_i2c_add_bus': cmd_i2c.c:1212:19: warning: variable 'dev' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07board/tqc/tqm8272/tqm8272.c: Fix GCC 4.6 build warning:Wolfgang Denk
Fix: tqm8272.c: In function 'initdram': tqm8272.c:462:14: warning: variable 'lsize' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8260/speed.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: speed.c: In function 'get_clocks': speed.c:113:30: warning: variable 'cpmdf' set but not used [-Wunused-but-set-variable] speed.c:113:23: warning: variable 'busdf' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07TQM850M: Add missing CONFIG_BOOTDELAYWolfgang Denk
This also fixes a build warning: main.c: In function 'main_loop': main.c:311:16: warning: variable 'bootlimit' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/svm_sc8xx/flash.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: flash.c: In function 'write_word': flash.c:542:15: warning: variable 'last' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/svm_sc8xx/flash.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/svm_sc8xx/svm_sc8xx.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: svm_sc8xx.c: In function 'checkboard': svm_sc8xx.c:83:6: warning: variable 'board_type' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/rbc823/flash.c: Fix flash initalizationWolfgang Denk
The RBC823 has only one NOR flash bank. Remove all code trying to deal with a second bank. This also fixes a number of GCC 4.6 build warnings: flash.c: In function 'flash_init': flash.c:62:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:63:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:66:12: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/rbc823/flash.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/fads/fads.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: fads.c: In function 'initdram': fads.c:606:7: warning: variable 'base' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/mbx8xx/mbx8xx.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: mbx8xx.c: In function 'mbx_init': mbx8xx.c:127:15: warning: variable 'refclock' set but not used [-Wunused-but-set-variable] mbx8xx.c: In function 'board_get_cpufreq': mbx8xx.c:231:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] mbx8xx.c: In function 'get_reffreq': mbx8xx.c:242:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/spi.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: spi.c: In function 'spi_init_f': spi.c:144:21: warning: variable 'iop' set but not used [-Wunused-but-set-variable] spi.c:142:22: warning: variable 'cpi' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07net/net.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: net.c: In function 'CDPHandler': net.c:1083:8: warning: variable 'applid' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/genietv/flash.c: Fix flash initializationWolfgang Denk
The GENIETV has only one NOR flash bank. Remove all code trying to deal with a second bank. This also fixes a number of GCC 4.6 build warnings: flash.c:65:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:66:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:69:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:183:2: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type ' Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/genietv/flash.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/etx094/flash.c: Fix flash initializationWolfgang Denk
The ETX094 has only one NOR flash bank. Remove all code trying to deal with a second bank. This also fixes a number of GCC 4.6 build warnings: flash.c: In function 'flash_init': flash.c:68:13: warning: array subscript is above array bounds [-Warray-bounds] flash.c:70:13: warning: array subscript is above array bounds [-Warray-bounds] flash.c:72:13: warning: array subscript is above array bounds [-Warray-bounds] flash.c:128:13: warning: array subscript is above array bounds [-Warray-bounds] flash.c:129:13: warning: array subscript is above array bounds [-Warray-bounds] flash.c:133:12: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/etx094/flash.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/i2c.c: replace PRINTD() by debug()Wolfgang Denk
This also fixes some GCC 4.6 build warnings like: warning: variable 'txbd' set but not used [-Wunused-but-set-variable] warning: variable 'rxbd' set but not used [-Wunused-but-set-variable] Signed-off-by: WOlfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07mpc8xx/i2c.c: CodungStyle cleanupWolfgang Denk
Make (mostly) checkpatch-clean We don't acctually change the code (like convert to use I/O accessors), so there will be some remaining "Use of volatile" warnings from checkpatch. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de>
2011-11-07board/eltec/mhpc/flash.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: flash.c: In function 'write_buff': flash.c:314:6: warning: variable 'count' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Frank Gottschling <fgottschling@eltec.de>
2011-11-07board/kup/kup4k/kup4k.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: kup4k.c: In function 'initdram': kup4k.c:155:19: warning: variable 'mod' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Klaus Heydeck <heydeck@kieback-peter.de>
2011-11-07ICU862: Fix incorrect flash handlingWolfgang Denk
There is only one bank of NOR flash memory on ICU862 boards. Remove code that attempts to deal with a second bank. This also fixes build warnings: flash.c: In function 'flash_init': flash.c:120:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:121:12: warning: array subscript is above array bounds [-Warray-bounds] flash.c:124:12: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/cpu.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: cpu.c: In function 'check_CPU': cpu.c:188:8: warning: variable 'mid' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/r360mpi/pcmcia.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: pcmcia.c: In function 'pcmcia_hardware_enable': pcmcia.c:22:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_hardware_disable': pcmcia.c:130:25: warning: variable 'pcmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/netta/pcmcia.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: pcmcia.c: In function 'cfg_ports': pcmcia.c:151:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] pcmcia.c:150:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_hardware_enable': pcmcia.c:179:25: warning: variable 'sysp' set but not used [-Wunused-but-set-variable] pcmcia.c:177:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] pcmcia.c:176:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_hardware_disable': pcmcia.c:271:25: warning: variable 'pcmp' set but not used [-Wunused-but-set-variable] pcmcia.c:270:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_voltage_set': pcmcia.c:303:9: warning: variable 'sreg' set but not used [-Wunused-but-set-variable] pcmcia.c:300:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/netta/codec.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: codec.c: In function 's_write_BR': codec.c:1389:15: warning: variable 'v' set but not used [-Wunused-but-set-variable] codec.c: In function 's_write_OR': codec.c:1400:15: warning: variable 'v' set but not used [-Wunused-but-set-variable] codec.c: In function 's_write_NR': codec.c:1411:15: warning: variable 'v' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/mbx8xx/pcmcia.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: pcmcia.c: In function 'pcmcia_hardware_enable': pcmcia.c:83:25: warning: variable 'sysp' set but not used [-Wunused-but-set-variable] pcmcia.c:81:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] pcmcia.c:80:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/manroland/uc100/pcmcia.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: pcmcia.c: In function 'pcmcia_voltage_set': pcmcia.c:158:25: warning: variable 'pcmp' set but not used [-Wunused-but-set-variable] pcmcia.c:157:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/lwmon/pcmcia.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: pcmcia.c: In function 'pcmcia_hardware_enable': pcmcia.c:33:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] pcmcia.c:32:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_voltage_set': pcmcia.c:174:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/kup/common/pcmcia.c: Fix GCC 4.6 compiler warningsWolfgang Denk
Fix: ../common/pcmcia.c: In function 'pcmcia_hardware_enable': ../common/pcmcia.c:23:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] ../common/pcmcia.c: In function 'pcmcia_voltage_set': ../common/pcmcia.c:152:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Klaus Heydeck <heydeck@kieback-peter.de>
2011-11-07board/icu862/pcmcia.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: pcmcia.c: In function 'cfg_port_B': pcmcia.c:21:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_hardware_enable': pcmcia.c:50:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] pcmcia.c: In function 'pcmcia_voltage_set': pcmcia.c:191:20: warning: variable 'immap' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/c2mon/pcmcia.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: pcmcia.c: In function 'pcmcia_voltage_set': pcmcia.c:202:21: warning: variable 'cp' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07drivers/pcmcia/mpc8xx_pcmcia.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: mpc8xx_pcmcia.c: In function 'pcmcia_on': mpc8xx_pcmcia.c:76:8: warning: variable 'slotbit' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07mpc8xx/fec.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: fec.c: In function 'fec_pin_init': fec.c:381:18: warning: variable 'fecp' set but not used [-Wunused-but-set-variable] fec.c: In function 'fec8xx_miiphy_write': fec.c:1013:8: warning: variable 'rdreg' set but not used [-Wunused-but-set-variable] Note: The code was slightly rearranged, but no functional changes attempted, i. e. no conversion to use I/O accessors. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07drivers/video/cfb_console.c:Fix GCC 4.6 build warningWolfgang Denk
Silence this warning: cfb_console.c: In function 'video_logo': cfb_console.c:1563:18: warning: variable 'y_off' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Anatolij Gustschin <agust@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2011-11-07board/tqc/tqm5200/cam5200_flash.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: cam5200_flash.c: In function 'flash_erase_32': cam5200_flash.c:282:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] cam5200_flash.c: In function 'flash_erase_16': cam5200_flash.c:612:24: warning: variable 'l_sect' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/esd/pf5200/pf5200.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: pf5200.c: In function 'do_phypower': pf5200.c:330:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2011-11-07board/esd/cpci5200/strataflash.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: strataflash.c: In function 'flash_write_cfiword': strataflash.c:681:11: warning: variable 'ctladdr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2011-11-07PM520: add missing enable_interrupts()Wolfgang Denk
The code disabled interrupts in several locations, without re-enabling them again. Fix this. While we are at it, also fix a GCC 4.6 build warning: flash.c: In function 'flash_erase': flash.c:373:21: warning: variable 'last' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Josef Wagner <Wagner@Microsys.de>
2011-11-07fs/fat/fat.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: fat.c: In function 'fat_register_device': fat.c:74:19: warning: variable 'info' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07drivers/video/videomodes.c: fix GCC 4.6 build warningWolfgang Denk
Fix: videomodes.c: In function 'video_get_params': videomodes.c:162:13: warning: variable 't' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2011-11-07drivers/rtc/rv3029.c: fix GCC 4.6 build warningsWolfgang Denk
Fix: rv3029.c: In function 'rtc_set': rv3029.c:98:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] rv3029.c: In function 'set_eere_bit': rv3029.c:131:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] rv3029.c: In function 'wait_eebusy': rv3029.c:149:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable] rv3029.c: In function 'rtc_reset': rv3029.c:165:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07drivers/rtc/ds3231.c: fix GCC 4.6 build warningsWolfgang Denk
Fix: ds3231.c: In function 'rtc_get': ds3231.c:90:52: warning: variable 'control' set but not used [-Wunused-but-set-variable] Fix is done by switching to standard debug() instead of custom macro. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/mcc200/auto_update.c: fixx GCC 4.6 build warningsWolfgang Denk
Fix: auto_update.c: In function 'do_auto_update': auto_update.c:344:48: warning: variable 'got_ctrlc' set but not used [-Wunused-but-set-variable] auto_update.c:344:18: warning: variable 'bitmap_first' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/cpu/mpc5xxx/usb_ohci.c: fix GCC 4.6 build warningsWolfgang Denk
Fix: usb_ohci.c: In function 'dl_transfer_length': usb_ohci.c:751:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07board/tqc/tqm5200/cmd_stk52xx.c: fix GC 4.6 build warningsWolfgang Denk
Fix: cmd_stk52xx.c: In function 'spi_transmit': cmd_stk52xx.c:85:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] cmd_stk52xx.c: In function 'i2s_play_wave': cmd_stk52xx.c:199:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-07arch/powerpc/lib/board.c: fix build warningWolfgang Denk
Fix: board.c: In function 'board_init_r': board.c:633:8: warning: unused variable 's' [-Wunused-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
generated by cgit (git 2.34.1) at 2024-12-29 09:44:49 +0000