summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-06-22DaVinci: EMAC: Get EMAC_MDIO_PHY_NUM from config filesPrakash PM
Currently EMAC_MDIO_PHY_NUM is defined as 1 in emac_defs.h. Because of this, EMAC does not work on EVMs which do not have phy connected at 1. Moving the macro to board config file makes this configurable depending on where the phy is connected on the MDIO bus. This patch fixes the board reset issue observed during network access on DM365EVM. EMAC driver was assuming EMAC_MDIO_PHY_NUM as 1 but it is 0 on DM365EVM. This patch is verified on da830/omap-l137, dm365 and dm644x evms. Signed-off-by: Prakash PM <prakash.pm@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-18Merge branch 'master' into nextWolfgang Denk
Conflicts: Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-17ppc4xx: icon: add support for SM502 chipAnatolij Gustschin
Adds initialization code for SM502 graphics controller and NL6448BC20-21D LCD panel. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
2010-06-17Merge branch 'next' of git://git.denx.de/u-boot-video into nextWolfgang Denk
2010-06-17Merge branch 'next' of git://git.denx.de/u-boot-pxa into nextWolfgang Denk
2010-06-17Merge branch 'fix' of git://git.denx.de/u-boot-pxaWolfgang Denk
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-marvellWolfgang Denk
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-tiWolfgang Denk
Conflicts: CONFLICT (rename/add): Rename board/davinci/da830evm/Makefile->board/ti/tnetv107xevm/Makefile in 89b765c7f6ddfde07ba673dd4adbeb5da391a81b. board/ti/tnetv107xevm/Makefile added in HEAD But files were identical, so no problem. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-17Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
2010-06-17Add support for the LaCie ED Mini V2 boardAlbert Aribaud
This patch adds support for the LaCie ED Mini V2 product which is based on the Marvell Orion5x SoC. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-06-17Add Orion5x support to 16550 device driverAlbert Aribaud
This patch provides access to the 16550-compatible serial device of the Orion5x SoC. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-06-17Initial support for Marvell Orion5x SoCAlbert Aribaud
This patch adds support for the Marvell Orion5x SoC. It has no use alone, and must be followed by a patch to add Orion5x support for serial, then support for the ED Mini V2, an Orion5x-based product from LaCie. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-06-14SAMSUNG: goni: add the GPL licenceMinkyu Kang
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Tom <Tom@bumblecow.com>
2010-06-14s5pc1xx: Add support for Samsung Goni boardMinkyu Kang
This patch adds support for the Samsung Goni board (S5PC110 SoC) Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-06-14s5pc1xx: gpio: bug fix at gpio_set_pull functionMinkyu Kang
When set to PULL_NONE, gpio_set_pull function is returned without write the register. This patch fixed it. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2010-06-14video: sm501.c: add weak default functionsAnatolij Gustschin
For boards using sm501/sm502 on PCI bus some driver functions normaly defined in the board code are not needed and empty. Provide weak default functions for them and do not enforce board code to define empty functions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-06-14video: sm501: add support for SM501 chips on PCI busAnatolij Gustschin
Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-06-14video: cfb_console: add weak default video_set_lut()Anatolij Gustschin
Do not enforce drivers to provide empty video_set_lut() if they do not implement indexed color (8 bpp) frame buffer support. Add default function to the cfb_console driver and remove empty video_set_lut() functions. Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-06-13Makefile/mkconfig: read simple board configurations from boards.cfgWolfgang Denk
Instead of adding explicit build rules for each and every board to the top level Makefile (which makes it grow and grow), we now provide a simple default rule and extend the "mkconfig" script to read board configurations from a plain text file (table), "boards.cfg". For simple boards it is now sufficient to add a single line of text to the "boards.cfg" file, no changes to the top level Makefile are needed any more. To make the table better readable, change the notation for unused fields from "NULL" into "-". Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Mike Frysinger <vapier@gentoo.org>
2010-06-13Makefile: simplify handling of common board configurationsWolfgang Denk
Many boards don't need any special handling in the Makefile. Try and provide as generic make rules for these as possible. There are still many areas where this does not work out really well, but the changes show the direction we should take, and point out which boards or architectures need further cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-13Makefile: simplify handling of build target namesWolfgang Denk
Instead of stripping the "_config" part from the make target names in each call of the "mkconfig" script let this script strip the string. This prepares the ground for forther simplification of the top level Makefile. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-13Fix printing of make targets, simplify MakefileWolfgang Denk
Make printing the "board names" more useful. So far, we would get output like this; $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P1_P2_RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P1_P2_RDB board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot For all build targets the same board name would be printed, which makes is often pretty difficult to find out which exact build target caused problems. With this commit, the real make target name gets printed instead, which is way more useful: $ ./MAKEALL P2020RDB P2020RDB_NAND P2020RDB_SDCARD P2020RDB_SPIFLASH Configuring for P2020RDB board... text data bss dec hex filename 342612 32656 265212 640480 9c5e0 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_NAND board... text data bss dec hex filename 343160 32704 265212 641076 9c834 /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SDCARD board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Configuring for P2020RDB_SPIFLASH board... text data bss dec hex filename 341908 32620 265212 639740 9c2fc /work/wd/tmp-ppc/u-boot Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
2010-06-13Prepare v2010-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-06-13PXA: Add missing MDREFR bitsMarek Vasut
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-06-13PXA: Add UP2OCR register bit definitionsMarek Vasut
This register is used on PXA to control the USB Port2 operation (USB Port2 is the host port). Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-06-13PXA: PXAMMC: Add Monahans supportMarek Vasut
This patch enables PXAMCI support on PXA3xx CPUs. This patch only enables MMC1 though, MMC2 and PXA31x MMC3 will need further patch to be operational. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-06-13PXA: PXAMMC: Drop different delays for PXA27XMarek Vasut
In case the delays were set to 10000, the MMC card on PXA27X boards (and PXA3xx boards) didn't initialize on first try. Increasing the delays and leaving just those for PXA25x and 26x (that is 200000) fixes this problem. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-06-13PXA: Align stack to 8 bytesMarek Vasut
Part of this patch is by: Mikhail Kshevetskiy. Stack must be aligned to 8 bytes on PXA (possibly all armv5te) for LDRD/STRD instructions. In case LDRD/STRD is issued on an unaligned address, the behaviour is undefined. The issue was observed when working with the NAND code, which was rendered disfunctional. Also, the vsprintf() function had serious problems with printing 64bit wide long longs. After aligning the stack, this wrong behaviour is no longer present. Tested on: Marvell Littleton PXA310 board Toradex Colibri PXA320 board Aeronix Zipit Z2 PXA270 handheld Voipac PXA270 board Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-06-10TI: DaVinci: Add board specific code for da850 EVMSudhakar Rajashekhara
Provides initial support for TI OMAP-L138/DA850 SoC devices on a Logic PD EVM board. Provides: Initial boot and configuration. Support for i2c. UART support (console). Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-10TI: DaVinci: Prepare for da850 supportSudhakar Rajashekhara
DA850/OMAP-L138 is a new SoC from Texas Instruments (http://focus.ti.com/docs/prod/folders/print/omap-l138.html). This SoC is similar to DA830/OMAP-L137 in many aspects. Hence rename the da830 specific files and folders to da8xx to accommodate DA850/OMAP-L138. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Ben Gardiner <bengardiner@nanometrics.ca> Reviewed-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-10da830: Move common code out of da830evm.c fileSudhakar Rajashekhara
TI's DA850/OMAP-L138 platform is similar to DA830/OMAP-L137 in many aspects. So instead of repeating the same code in multiple files, move the common code to a different file and call those functions from the respective da830/da850 files. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Nick Thompson <nick.thompson@ge.com> Acked-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08OMAP3: pandora: enable battery backup capacitorGrazvydas Ignotas
Pandora has a capacitor connected as backup battery, which allows retaining RTC for some time while main battery is removed. Enable backup battery charge function to charge that capacitor. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08DaVinci: Improve DaVinci SPI speed.Delio Brignoli
I have updated this patch based on the comments [1] by Wolfgang Denk and removed unused variables. [1][http://lists.denx.de/pipermail/u-boot/2010-May/071728.html] Reduce the number of reads per byte transferred on the BUF register from 2 to 1 and take advantage of the TX buffer in the SPI module. On LogicPD OMAP-L138 EVM, SPI read throughput goes up from ~0.8Mbyte/s to ~1.3Mbyte/s. Tested with a 2Mbyte image file. Remove unused variables in the spi_xfer() function. Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08AM35x: Add support for EMIF4Vaibhav Hiremath
This patch adds support for the EMIF4 interface available in the AM35x processors. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08AM35x: Add support for AM3517EVMVaibhav Hiremath
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08omap3: Consolidate SDRC related operationsVaibhav Hiremath
Consolidated SDRC related functions into one file - sdrc.c And also replaced sdrc_init with generic memory init function (mem_init), this generalization of omap memory setup is necessary to support the new emif4 interface introduced in AM3517. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08omap3: Calculate CS1 size only when SDRC isVaibhav Hiremath
initialized for CS1 From: Vaibhav Hiremath <hvaibhav@ti.com> The patch makes sure that size for SDRC CS1 gets calculated only when the CS1 SDRC is initialized. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08OMAP3EVM: Added NAND supportVaibhav Hiremath
The EVMS have been shipping with NAND (instead of OneNAND) as default. So, this patch sets NAND as default. To choose OneNAND, define CMD_ONENAND instead of CMD_NAND in the config file omap3_evm.h. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08TI: TNETV107X EVM initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08ARM1176: TI: TNETV107X soc initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This is an initial commit with basic functionality, more commits with drivers, etc. to follow. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-08ARM1176: Coexist with other ARM1176 platformsCyril Chemparathy
The current ARM1176 CPU specific code is too specific to the SMDK6400 architecture. The following changes were necessary prerequisites for the addition of other SoCs based on ARM1176. Existing board's (SMDK6400) configuration has been modified to keep behavior unchanged despite these changes. 1. Peripheral port remap configurability The earlier code had hardcoded remap values specific to s3c64xx in start.S. This change makes the peripheral port remap addresses and sizes configurable. 2. U-Boot code relocation support Most architectures allow u-boot code to run initially at a different address (possibly in NOR) and then get relocated to its final resting place in RAM. Added support for this capability in ARM1176 architecture. 3. Disable TCM if necessary If a ROM based bootloader happened to have initialized TCM, we disable it here to keep things sane. 4. Remove unnecessary SoC specific includes ARM1176 code does not really need this SoC specific include. The presence of this include prevents builds on other ARM1176 archs. 5. Modified virt-to-phys conversion during MMU disable The original MMU disable code masks out too many bits from the load address when it tries to figure out the physical address of the jump target label. Consequently, it ends up branching to the wrong address after disabling the MMU. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07DaVinci: Improve DaVinci SPI speed.Delio Brignoli
I have updated this patch based on the comments [1] by Wolfgang Denk and removed unused variables. [1][http://lists.denx.de/pipermail/u-boot/2010-May/071728.html] Reduce the number of reads per byte transferred on the BUF register from 2 to 1 and take advantage of the TX buffer in the SPI module. On LogicPD OMAP-L138 EVM, SPI read throughput goes up from ~0.8Mbyte/s to ~1.3Mbyte/s. Tested with a 2Mbyte image file. Remove unused variables in the spi_xfer() function. Signed-off-by: Delio Brignoli <dbrignoli@audioscience.com> Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07AM35x: Add support for EMIF4Vaibhav Hiremath
This patch adds support for the EMIF4 interface available in the AM35x processors. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07AM35x: Add support for AM3517EVMVaibhav Hiremath
This patch adds basic support for the AM3517EVM. It includes: - Board files (.c and .h) - Default configuration file - Updates for Makefile Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07omap3: Consolidate SDRC related operationsVaibhav Hiremath
Consolidated SDRC related functions into one file - sdrc.c And also replaced sdrc_init with generic memory init function (mem_init), this generalization of omap memory setup is necessary to support the new emif4 interface introduced in AM3517. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07omap3: Calculate CS1 size only when SDRC isVaibhav Hiremath
initialized for CS1 From: Vaibhav Hiremath <hvaibhav@ti.com> The patch makes sure that size for SDRC CS1 gets calculated only when the CS1 SDRC is initialized. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07OMAP3EVM: Added NAND supportVaibhav Hiremath
The EVMS have been shipping with NAND (instead of OneNAND) as default. So, this patch sets NAND as default. To choose OneNAND, define CMD_ONENAND instead of CMD_NAND in the config file omap3_evm.h. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07TI: TNETV107X EVM initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This patch adds support for the TNETV107X EVM board. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07ARM1176: TI: TNETV107X soc initial supportCyril Chemparathy
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a bunch on on-chip integrated peripherals. This is an initial commit with basic functionality, more commits with drivers, etc. to follow. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-06-07ARM1176: Coexist with other ARM1176 platformsCyril Chemparathy
The current ARM1176 CPU specific code is too specific to the SMDK6400 architecture. The following changes were necessary prerequisites for the addition of other SoCs based on ARM1176. Existing board's (SMDK6400) configuration has been modified to keep behavior unchanged despite these changes. 1. Peripheral port remap configurability The earlier code had hardcoded remap values specific to s3c64xx in start.S. This change makes the peripheral port remap addresses and sizes configurable. 2. U-Boot code relocation support Most architectures allow u-boot code to run initially at a different address (possibly in NOR) and then get relocated to its final resting place in RAM. Added support for this capability in ARM1176 architecture. 3. Disable TCM if necessary If a ROM based bootloader happened to have initialized TCM, we disable it here to keep things sane. 4. Remove unnecessary SoC specific includes ARM1176 code does not really need this SoC specific include. The presence of this include prevents builds on other ARM1176 archs. 5. Modified virt-to-phys conversion during MMU disable The original MMU disable code masks out too many bits from the load address when it tries to figure out the physical address of the jump target label. Consequently, it ends up branching to the wrong address after disabling the MMU. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
generated by cgit (git 2.34.1) at 2025-01-07 21:05:02 +0000