summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-10-13driver: net: cpsw: add support for RGMII id mode support and RMII clock ↵Mugunthan V N
source selection cpsw driver supports only selection of phy mode in control module but control module has more setting like RGMII ID mode selection, RMII clock source selection. So ported to cpsw-phy-sel driver from kernel to u-boot. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13include: configs: am335x: add Atheros phy supportMugunthan V N
In AM335x GP EVM, Atheros 8031 phy is used, enable the driver as AM335x SoC RGMII delay mode has to be enabled in phy as mentioned in the silicon errata Advisory 1.0.10 Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13drivers: net: phy: atheros: add separate config for AR8031Mugunthan V N
In the current driver implementation, config() callback is common for AR8035 and AR8031 phy. In config() callback, driver tries to configure MMD Access Control Register and MMD Access Address Data Register unconditionally for both phy versions which leads to auto negotiation failure in AM335x EVMsk second port which uses AR8031 Giga bit RGMII phy. Fixing this by adding separate config for AR8031 phy. Reviewed-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXIDAndrea Merello
This adds support for internal delay on RX and TX on RGMII interface for the AR8035 phy. This is basically the same Linux driver do. Tested on a Zynq Zturn board (for which u-boot support in is my tree; first patch waiting ML approval) Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-10-13Merge branch 'master' of http://git.denx.de/u-boot-mmcTom Rini
2016-10-12Merge git://git.denx.de/u-boot-dmTom Rini
2016-10-12Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini
2016-10-12Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2016-10-12Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-10-12Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2016-10-12Merge git://www.denx.de/git/u-boot-marvellTom Rini
2016-10-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/ls1021aqds.h include/configs/ls1021atwr.h
2016-10-12common: Add DISPLAY_BOARDINFOLokesh Vutla
Create a Kconfig entry for DISPLAY_BOARDINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12common/Kconfig: Add DISPLAY_CPUINFOLokesh Vutla
Create a Kconfig entry for DISPLAY_CPUINFO and make it be the default in certain architectures. Migrate all config files. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-12x86: Clean up unused macros in the configuration headersBin Meng
Legacy video driver macros are not needed. Clean them up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12video: Remove legacy VESA and coreboot framebuffer driversBin Meng
Now that all x86 boards have been converted to DM video, drop the legacy drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: coreboot: Convert to use DM coreboot video driverBin Meng
This converts coreboot to use DM framebuffer driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Don't do anything in alloc_fb() when plat->size is zeroBin Meng
With DM VESA driver on x86 boards, plat->base/size/align are all zeroes and starting address passed to alloc_fb() happens to be 1MB aligned, so this routine does not trigger any issue. On QEMU with U-Boot as coreboot payload, the starting address is within 1MB range (eg: 0x7fb0000), thus causes failure in video_post_bind(). Actually if plat->size is zero, it makes no sense to do anything in this routine. Add such check there. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Add driver for coreboot framebuffer deviceBin Meng
This adds a DM driver for coreboot framebuffer device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12vbe: Make vbe_setup_video_priv() publicBin Meng
vbe_setup_video_priv() might be useful to other drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: doc: Correct qfw command exampleBin Meng
The kernel load address for zboot should be 0x1000000. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: Convert to use DM VESA video driverBin Meng
At present only chromebook boards are converted to DM video. Other x86 boards are still using the legacy cfb_console driver. This switches to use DM version drivers. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Output verbose information in vbe_setup_video()Bin Meng
With DM conversion, information like "Video: 1024x768x16" is not shown anymore. Now add these verbose output back. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12dm: video: Add driver for VESA-compatible deviceBin Meng
This adds a DM driver for VESA-compatible device. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-12x86: doc: Document coreboot framebuffer driver issue on QEMUBin Meng
For some unknown reason, coreboot framebuffer driver never works on QEMU since day 1. It seems the driver only works on real hardware. Document this issue. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11cmd: cros_ec: Move crosec commands to cmd subdirectoryMoritz Fischer
Move crosec commands from drivers/misc/cros_ec.c to cmd/cros_ec.c Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Simon Glass <sjg@chromium.org> Cc: Heiko Schocher <hs@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Miao Yan <yanmiaobest@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Stefan Roese <sr@denx.de> Cc: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Nishanth Menon <nm@ti.com> Cc: u-boot@lists.denx.de
2016-10-11sandbox/fs: Set correct filetype for unknown filetypeStefan Brüns
The "hostfs ls" command prefixes each directory entry with either DIR, LNK or " " if it is a directory, symlink resp. regular file, or "???" for any other or unknown type. The latter only works if the type is set correctly, as the entry defaults to OS_FILET_REG and e.g. socket files show up as regular files. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox: Use the address in readl/writel() functionsSimon Glass
At present these functions do not touch addr, which can raising warnings about unused variables. This fixes the following warnings: sandbox_spl defconfig drivers/core/regmap.c: In function ‘regmap_read’: drivers/core/regmap.c:125:12: warning: unused variable ‘ptr’ [-Wunused-variable] uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE); ^ drivers/core/regmap.c: In function ‘regmap_write’: drivers/core/regmap.c:134:12: warning: unused variable ‘ptr’ [-Wunused-variable] uint32_t *ptr = map_physmem(map->base + offset, 4, MAP_NOCACHE); Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 3bfb8cb4 (dm: regmap: Implement simple regmap_read & regmap_write)
2016-10-11sandbox/fs: Use readdir instead of deprecated readdir_rStefan Brüns
Using readdir_r limits the maximum file name length and may even be unsafe, and is thus deprecated in since glibc 2.24. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox/fs: Use correct size path name bufferStefan Brüns
The readdir linux manpage explicitly states (quoting POSIX.1) that sizeof(d_name) is not correct for determining the required size, but to always use strlen. Grow the buffer if needed. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox/fs: Make linking of nodes in os_dirent_ls more obviousStefan Brüns
Previously, after reading/creating the second dirent, the second entry would be chained to the first entry and the first entry would be linked to head. Instead, immediately link the first entry to head. Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11sandbox/fs: Free memory allocated by os_dirent_lsStefan Brüns
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Acked-by: Simon Glass <sjg@chromium.org>
2016-10-11power: regulator: lp873x: Add regulator supportKeerthy
The driver provides regulator set/get voltage enable/disable functions for lp873x family of PMICs. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11power: pmic: lp873x: Add the base pmic supportKeerthy
Add support to bind the regulators/child nodes with the pmic. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11configs: am57xx_evm_defconfig: Enable CMD_REG optionKeerthy
Enable CMD_REG option. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11configs: am57xx_evm_defconfig: Enable PALMAS optionsKeerthy
Enable palmas PMIC config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11configs: dra7xx_evm_defconfig: Enable PALMAS optionsKeerthy
Enable palmas PMIC config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11power: regulator: palmas: Add regulator supportKeerthy
The driver provides regulator set/get voltage enable/disable functions for palmas family of PMICs. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11power: pmic: Palmas: Add the base pmic supportKeerthy
Add support to bind the regulators/child nodes with the pmic. Also adds the pmic i2c based read/write funtions to access pmic registers. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-10-11power: regulator: Add ctrl_reg and volt_reg fields for pmicKeerthy
The ctrl reg contains bit fields to enable and disable regulators, and volt_reg has the bit fields to configure the voltage values. The registers are frequently accessed hence make them part of dm_regulator_uclass_platdata structure. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11power: regulator: Add support for gpio regulatorsKeerthy
Add support for gpio regulators. As of now this driver caters to gpio regulators with one gpio. Supports setting voltage values to gpio regulators and retrieving the values. Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-11dm: mmc: Enable DM_MMC_OPS by default with DM_MMCSimon Glass
These two options go together and it is best to do the conversion in one step. So enable DM_MMC_OPS by default if DM_MMC is enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-11dm: blk: Enable CONFIG_BLK if DM_MMC is enabledSimon Glass
To speed up conversion to CONFIG_BLK, enable it by default when DM_MMC is enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-10-11x86: mrccache: Fix error handling in mrccache_get_region()Simon Glass
This should return normal errors, not device-tree errors. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Drop unused init_helper functionsSimon Glass
Drop init_bd_struct_r() which is no-longer used. Also drop the declaration for init_func_spi() since this is now handled by generic board init. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: ivybridge: Tidy up enable_clock_gating() for 64-bitSimon Glass
Fix the hex case and remove unused brackets. Use ~0U instead of ~0UL to allow compilation on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: ivybridge: Fix PCH power setupSimon Glass
At present pch_power_options() has the arguments to writel() around the wrong way. Fix this and update it to compile on 64-bit machines. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Don't export interrupt handlers with x86_64Simon Glass
We don't have a way of adjusting these at present so it is best to refuse to export these functions. This can be implemented later if the API is required. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: i2c: Fix cast of address to 32-bit valueSimon Glass
This gives a build warning on 64-bit x86. Fix it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-10-11x86: Correct address casts in interrupt codeSimon Glass
We should cast an address to unsigned long, not u32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2024-12-26 12:31:01 +0000