summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-07-26configs: Disable 4k erase sector size for spansion "s25fs512s" flashAshish Kumar
4K erase size is used only in case of hydrid mode which is not supported on any NXP platform with flash "s25fs512s". Supported mode is uniform sector, with erase size 256kiB. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26LS1088ARDB: Secure Boot:Change load address of dpl header in SDVinitha V Pillai
Change address of DPL header in SD. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls2080ardb: update copyright claimAlison Wang
This patch updates the copyright claim for the issues reported by legal review. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26LS1043ARBD: Fix SD Boot issue with PPAVinitha V Pillai
CONFIG_SPL_FSL_LS_PPA is needed only in case of falcon boot Support for this is not present in PPA currently, so removing the default option from defconfig Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26armv8: ls1088a: change dpl load command from apply to lazyapplyJagdish Gediya
use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr" change dpl load addr to 0x80001000 from 0x80200000 because dpl gets corrupted at 0x80200000 during bootm command excecution. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26Makefile: Fix 'clean' targetTom Rini
Now that we have removed the DocBook files we need to not try and clean that directory. Reported-by: ericywl <midnight2903@gmail.com> Reported-by: Jagan Teki <jagan@amarulasolutions.com> Fixes: 78a88f7930be ("doc: Replace DocBook with sphinx-based docs") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-24Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2018-07-25ARM: uniphier: enable distro bootMasahiro Yamada
Switch to the distro boot for UniPhier platform. - Remove the environment vairalbes used to load images from raw block devices. - Keep the command to download images via tftp. This will be useful to boot the kernel when no valid kernel image is ready yet in the file system. - Use root.cpio.gz instead of root.cpio.uboot because we always know the file size of the init ramdisk; it is loaded via either a file system or network. - Rename fit_addr_r to kernel_addr_r, which the distro command checks to get the load address of FIT image. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25ARM: uniphier: enable MTD partition and UBIMasahiro Yamada
Enable "mtdparts" and "ubi" commands for uniphier_v8_defconfig to use UBI on NAND devices. Enable only "mtdparts" for uniphier_{v7,ld4_sld8}_defconfig because enabling UBI would increase 170KB, which would be memory footprint problem. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25ARM: uniphier: support fdt_fixup_mtdpartsMasahiro Yamada
Propagate the "mtdparts" environment variable to the DT passed in to OS. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25ARM: uniphier: split ft_board_setup() out to a separate fileMasahiro Yamada
Prepare to add more fdt fixup code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25ARM: uniphier: clean-up ft_board_setup()Masahiro Yamada
The 'bd' is passed in ft_board_setup() as the second argument. Replace 'gd->bd' with 'bd'. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25board: constify struct node_info arrayMasahiro Yamada
Add 'const' (also 'static' in some places) to struct node_info arrays to save memory footprint. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25fdt_support: make fdt_fixup_mtdparts() prototype more specificMasahiro Yamada
The second argument of fdt_fixup_mtdparts() is an opaque pointer, 'void *node_info', hence callers can pass any pointer. Obviously, fdt_fixup_mtdparts() expects 'struct node_info *' otherwise, it crashes run-time. Change the prototype so that it is compile-time checked. Also, add 'const' qualifier to it so that callers can constify the struct node_info arrays. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-25mtd: nand: denali: correct buffer alignment for DMA transferMasahiro Yamada
The NAND framework makes sure to pass in the buffer with at least chip->buf_align alignment. Currently, the Denali NAND driver only requests 16 byte alignment. This causes unaligned cache operations for the DMA transfer. [Error Example] => nand read 81000010 0 1000 NAND read: device 0 offset 0x0, size 0x1000 CACHE: Misaligned operation at range [81000010, 81001010] CACHE: Misaligned operation at range [81000010, 81001010] CACHE: Misaligned operation at range [81000010, 81001010] CACHE: Misaligned operation at range [81000010, 81001010] 4096 bytes read: OK Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-25kconfig: Avoid format overflow warning from GCC 8.1Luis Araneda
cherry-pick kernel commit 2ae89c7 (2018-06-05) to avoid warnings when compiling with GCC 8.1 In file included from scripts/kconfig/zconf.tab.c:2486: scripts/kconfig/confdata.c: In function ‘conf_write’: scripts/kconfig/confdata.c:771:22: warning: ‘%s’ directive writing likely 7 or more bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(newname, "%s%s", dirname, basename); ^~ scripts/kconfig/confdata.c:771:19: note: assuming directive output of 7 bytes sprintf(newname, "%s%s", dirname, basename); ^~~~~~ scripts/kconfig/confdata.c:771:2: note: ‘sprintf’ output 1 or more bytes (assuming 4104) into a destination of size 4097 sprintf(newname, "%s%s", dirname, basename); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scripts/kconfig/confdata.c:774:23: warning: ‘.tmpconfig.’ directive writing 11 bytes into a region of size between 1 and 4097 [-Wformat-overflow=] sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~ scripts/kconfig/confdata.c:774:3: note: ‘sprintf’ output between 13 and 4119 bytes into a destination of size 4097 sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-24mailmap: Fix broken email from fit_image.cMichal Simek
The patch "tools/mkimage: Fix DTC run command to handle file names with space" (sha1: a6e9810495bc929b6beafb88f557cdaadf87fc83) contains comma in name which is confusing patman. Fix it by defining Mirza's email in mailmap. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-24configs: am3517-evm: Setup NAND bootingAdam Ford
The NAND offsets for the kernel and U-Boot were missing. This patch sets up the offsets so the AM3517-EVM can boot from NAND when DIP switches S7:1 and S7:4 are to the OFF position Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-24ARM: AM3517-EVM: Update MaintainerAdam Ford
The previous e-mail pointing to Vaibhav Hiremath <hvaibhav@ti.com> is bouncing and has for some time. This updates it to myself and I work for Logic PD the manufacturer of the AM3517-SOM and EVM Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-24config: remove unused CONFIG_SPL_RELOC_STACK_SIZEHeinrich Schuchardt
Symbol CONFIG_SPL_RELOC_STACK_SIZE is not used anywhere. So remove it. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-07-24doc: Move device tree bindings documentation to doc/device-tree-bindingsBreno Lima
Currently the U-Boot project contains 2 documentation directories: - doc/ - Documentation/ The Documentation directory only contains device tree bindings related content, so move the 3 files to doc/device-tree-bindings/. Signed-off-by: Breno Lima <breno.lima@nxp.com>
2018-07-24mkimage: fit_image: Use macros from image.hMichal Simek
There is no reason not to use macros which are already defined. It is also much easier for grepping. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-24omap3: beagle: re-enable EFI support after the following commit removed it ↵Guillaume GARDET
by mistake: commit d233ccb1d84b901f7e23e6d9b4f2c6a57198b23b ARM: omap3: beagle: Enable DM_SERIAL, update distro usage and NAND layout Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Tom Rini <trini@konsulko.com>
2018-07-24spl: remove dependency to "asm/utils.h"Paulo Zaneti
Header file "asm/utils.h" is not required to compile "spl_ymodem.c". So, removing this dependency allows other architectures to use this booting device as "asm/utils.h" is only present in "arm" architecture. Signed-off-by: Paulo Zaneti <paulo.zaneti@datacom.ind.br>
2018-07-24hashtable: Fix length calculation in hexport_rZubair Lutfullah Kakakhel
The length returned by hexport_r has a few redundant characters. This appears as NULL characters at the end so seems harmless. Remove the surplus counts in two places totlen += strlen(ep->key) + 2; I'm guessing the +2 here is for = and sep char. But there is another totlen += 2; line that does that. size = totletn + 1; Doesn't make sense and isn't justified with any comment. Signed-off-by: Zubair Lutfullah Kakakhel <zubair@resin.io>
2018-07-24avb2.0: use block API in AVB opsIgor Opaniuk
Use blk_dread()/blk_dwrite() in mmc_read()/mmc_write() AVB operation implementations. This fixes compilation issues when CONFIG_BLK is enabled. Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Tested-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
2018-07-24avb2.0: add proper dependenciesIgor Opaniuk
1. Since libavb library alone is highly portable, introduce dedicated Kconfig symbol for AVB bootloader-dependent operations, so it's possible to build libavb separately. AVB bootloader-dependent operations include: * Helpers to process strings in order to build OS bootargs. * Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c. * Helpers to alloc/init/free avb ops. 2. Add CONFIG_FASTBOOT dependency, as fastboot buffer is re-used in partition verification operations. Reported-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: Eugeniu Rosca <rosca.eugeniu@gmail.com> Tested-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
2018-07-24mtdparts: fixed buffer overflow bugKay Potthoff
In the case that there was no name defined for a partition the code assumes that name_len is 22 and therefore allocates exactly that space for a dummy name. But the function sprintf() first resolves "0x%08llx@0x%08llx" to a string that is longer than 22 bytes. This leads to a buffer overflow. The replacement function snprintf() limits the copied bytes to name_len and therefore avoids the buffer overflow. Signed-off-by: Kay Potthoff <Kay.Potthoff@microsys.de>
2018-07-24board: STiH410-B2260: Set SYS_BOOTM_LEN to 16MPatrice Chotard
With recent kernel v4.18-rcx, uImage becomes bigger than 8MB. Set SYS_BOOTM_LEN to 16MB, this fix the following error message: "Fix Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN" Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-24mtd: remove stale comment in mtd_oob_ops structureMiquel Raynal
A comment in the kernel doc of the mtd_oob_ops structure tells that it is not possible to write more than one page with OOB. This was probably true at some time in the past but today it is entirely wrong. As one can see for instance in the nand_do_write_ops() helper available in the NAND core, this implementation called by mtd->_write_oob() simply loops over the pages until everything has been written. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-24rtc: compile date.c if DM_RTCAKASHI Takahiro
rtc_to_tm() and rtc_mktime() are required for some RTC drivers, at least PL031. Without this patch, we also need to enable CONFIG_CMD_DATE even if we don't want or need this command. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-07-23mtd: nand: add new enum for storing ECC algorithmRafał Miłecki
Our nand_ecc_modes_t is already a bit abused by value NAND_ECC_SOFT_BCH. This enum should store ECC mode only and putting algorithm details there is a bad idea. It would result in too many values impossible to support in a sane way. To solve this problem let's add a new enum. We'll have to modify all drivers to set it properly but once it's done it'll be possible to drop NAND_ECC_SOFT_BCH. That will result in a cleaner design and more possibilities like setting ECC algorithm for hardware ECC mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Linux commit: b0fcd8ab7b3c89b5da7fff5224d06ed73e7a33cc] [Philippe Reynes: adapt code to u-boot] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2018-07-23ARM: configs: omap3_logic: remove Legacy OMAP3 USB driverAdam Ford
Only the MUSB driver is currently supported on the omap3_logic boards. The driver is using the new-musb and not the legacy version, so this patch removes the dead code references. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23Convert CONFIG_DA8XX_GPIO to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_DA8XX_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: am3517-evm-u-boot: Mark MMC1 with cd-invertedAdam Ford
In order to use the device tree for MMC, the card-detect pin needs to be inverted. This patch places this into the am3517-evm-u-boot.dtsi file to keep the main DTS and DTSI files clean and in-sync with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: dts: am3517-evm-uboot: Add reg-shift for UARTAdam Ford
With the resync of the omap3.dtsi file, the reg-shift was removed so it breaks the UART. Adding the reg-shift into the am3517-evm-u-boot.dtsi keeps the reg-shift for U-Boot, but keeps the dts/dtsi files clean from Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23doc: Replace DocBook with sphinx-based docsMario Six
The Linux kernel moved to sphinx-based documentation and got rid of the DocBook based documentation quite a while ago. Hence, the DocBook documentation for U-Boot should be converted as well. To achieve this, import the necessary files from Linux v4.17, and convert the current DocBook documentation (three files altogether) to sphinx/reStructuredText. For now, all old DocBook documentation was merged into a single handbook, tentatively named "U-Boot Hacker Manual". For some source files, the documentation style was changed to comply with kernel-doc; no functional changes were applied. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-07-23ARM: DTS: Resync Logic PD SOM-LV 37xx devkit with Linux 4.18-RC4Adam Ford
There have been some significant changes to the DM37 SOM-LV device tree. This patch re-syncs it with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.18-RC4Adam Ford
There have been some refactoring of the DTS files for the Logic PD DM37 Torpedo. This patch re-sync's the DTS files with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4Adam Ford
There have been several minor changes to the OMAP3.dtsi, so this patch re-syncs it with Linux. An addition include/dt-binding was also brought with it. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync am3517-evm.dts with Linux 4.18-rc4Adam Ford
Several changes have been made to the AM3517-evm and the underlying am3517.dtsi file. This patch re-sync's the DTS and DTSI files with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23m68k: m5253evbe: Remove this boardTom Rini
The m5253evbe board has been marked as orphan since June of 2014 and should have been dropped a while ago. Do so now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23spi: stm32_qspi: rework mode managementChristophe Kerello
This patch solves quad read issue with Macronix/Micron spi nor. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-23spi: stm32_qspi: assign functional operation mode in _stm32_qspi_gen_ccrChristophe Kerello
This patch assigns the functional operation mode in _stm32_qspi_gen_ccr function. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-23bios_emulator: remove assignment without effectHeinrich Schuchardt
Assigning a parameter which is not used afterwards has not effect. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-23Merge branch 'master' of git://git.denx.de/u-boot-imxTom Rini
trini: Update colibri-imx6ull to use Kconfig for mtdparts related options. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-23configs: imx6q_logic: Cleanup ramdiskaddr and fdtaddrAdam Ford
There are already definitions for ramdisk_addr_r and fdt_addr_r, so having a duplicate copy called ramdiskaddr and fdtaddr is confusing. This patch converts any references to ramdisk_addr_r and fdt_addr_r and removes the duplicates. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23mx25: fix the offset between the USB ports' registersMartin Kaiser
The USBOH module on imx25 chips contains two USB controllers which are called USB OTG Controller and USB Host Controller. Each one has its EHCI root hub. The OTG Controller's EHCI registers start at offset 0, the Host Controller's registers start at offset 0x400. We set CONFIG_MXC_USB_PORT=0 to select the OTG Controller and 1 for the Host Controller. Therefore, IMX_USB_PORT_OFFSET must be 0x400. Using this setting, the Host Controller starts working on my imx25 board. Please note that the imx25 reference manual claims that the Host Controller's registers start at 0x200. This is not correct. The Linux Kernel uses the correct offset 0x400 in imx25.dtsi. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-07-23tools/imximage: get HAB information from headerHolger Dengler
Signing parts of a u-boot imximage for image verification in High Assurance Boot (HAB) in a post-build process, requires some information from the imximage header. Currently, this information is only provided during the image build, which makes the transfer of this information to the post-build process harder than necessary. The i.MX HAB information (start and length) can be calculated either by using information from the image-configuration file, or from the information in the flash header of the imximage. The advantage of using information from flash header is, that they are not only available during image creation, but also available if existing images are processed. Example: $ tools/mkimage -l u-boot.imx Image Type: Freescale IMX Boot Image Image Ver: 2 (i.MX53/6/7 compatible) Mode: DCD Data Size: 483328 Bytes = 472.00 KiB = 0.46 MiB Load Address: 877ff420 Entry Point: 87800000 HAB Blocks: 0x877ff400 0x00000000 0x00071c00 DCD Blocks: 0x00910000 0x0000002c 0x00000208 Signed-off-by: Holger Dengler <dengler@linutronix.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
2018-07-23ARM: dh_imx6: enable GigaDevice, Macronix, and Winbond SPI Flash support in ↵Ludwig Zenz
Kconfig In preparation for delivery bottlenecks, enable support for GigaDevice, Macronix, and Winbond nor flash chips. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.de>