summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-29driver: net: fm: add DM MDIO supportMadalin Bucur
Allow the MDIO devices to be probed based on the device tree. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: separate receive buffer free codeMadalin Bucur
Move the receive buffer free code in a separate function. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29driver: net: fm: change init_phy() paramMadalin Bucur
Change the init_phy() parameter to simplify the code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1046ARDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1046ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1046AMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the LS1046A SoC. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 to LS1043ARDBMadalin Bucur
Introduce the QorIQ DPAA 1 Frame Manager nodes in the LS1043ARDB device tree. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 for LS1043AMadalin Bucur
Add the QorIQ DPAA 1 Frame Manager v3 device tree nodes for the LS1043A SoC. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: add QorIQ DPAA 1 FMan v3 device tree nodesMadalin Bucur
Add the QorIQ DPAA Frame Manager v3 device tree nodes description. The device tree fragments are copied over with little modification from the Linux kernel source code. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1012afrwy: drop env qspi_bootcmdBiwen Li
Drop useless environment variable installer and qspi_bootcmd for ls1012afrwy. Only 2 MB nor flash in ls1012afrwy. So cannot get kernel(30 MB) from the nor flash, then drop it. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1046aqds: support distro bootBiwen Li
Add support of distro boot for ls1046aqds Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1028aqds: add lpuart configYuantian Tang
Add lpuart config to enable lpuart feature. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com>. Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29armv8: ls1028aqds: add lpuart dts supportYuantian Tang
Rename fsl-ls1028a-qds.dts to fsl-ls1028a-qds.dtsi so that it can be used as common device tree for lpuart and duart. Add lpuart device tree and duart device tree respectively for qds which are used with duart and lpuart console. Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1028a: add lpuart nodesYuantian Tang
Add lpuart nodes to enable lpuart feature Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: freescale: ls1028a: mux changes for lpuartYuantian Tang
mux changes in board file to enable lpuart1 and macro define for lpuart1 used for mux changes in board configuation register 13 Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: lx2160ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LX2160ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls2088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS2088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29configs: ls1088ardb: enable CONFIG_DM_ETH and relatedIoana Ciornei
Enable CONFIG_DM_ETH and CONFIG_DM_MDIO and related configs for the LS1088ARDB board. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (8 x VSC8514, AQR105). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the external MDIO nodes and describe the PHYs (4 x AQR405 and 4 x CS4340). Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160ardb: add DPMAC and PHY nodesIoana Ciornei
In order to maintain compatibility with the Linux DTS, the entire fsl-mc node is added but instead of being probed by a dedicated bus driver it will be a simple-mfd. Also, annotate the EMDIO1 node and describe the 2 AR8035 RGMII PHYs and the 2 AQR107 PHYs. Also, add phy-handles for the dpmacs to their associated PHY. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls1088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: ls2088a: add external MDIO nodesIoana Ciornei
Add the External MDIO1 device node found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29arm: dts: lx2160a: add external MDIO nodesIoana Ciornei
Add the External MDIO device nodes found in the WRIOP global memory region. This is needed for management of external PHYs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: ls2088ardb: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29board: ls1088ardb: transition to DM_ETHIoana Ciornei
In case CONFIG_DM_ETH is enabled, no hardcoding is necessary for DPAA2 Ethernet devices. Compile out any unnecessary setup when CONFIG_DM_ETH is activated. Also, force the PCI devices to be enumerated at probe time. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: fsl-mc: add support for CONFIG_DM_ETHIoana Ciornei
Make any adjustments necessary in order to support DPAA2 devices probed using CONFIG_DM_ETH. While at it, fixup some styling issues aroung the switch-case statement. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: ldpaa: add DTS based probing supportIoana Ciornei
When CONFIG_DM_ETH is enabled DPAA2 network interfaces will now probe based on DTS nodes with the "fsl,qoriq-mc-dpmac" compatible. In this case, transform the ldpaa_eth driver into a UCLASS_ETH driver and reuse the _open()/_tx()/_stop() functions already inplemented. For the moment, the ldpaa_eth driver will support both configurations: with or without CONFIG_DM_ETH enabled. Any 'struct eth_device' occurrence now has a matching 'struct udevice' made mutually exclusive based on the state of CONFIG_DM_ETH. Signed-off-by: Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29drivers: net: add Layerscape mEMAC MDIO driverIoana Ciornei
Add a driver for the MDIO interface integrated in the mEMAC (Multi-rate Ethernet Media Access Controller) and the Fman 10G Ethernet MACs. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-29ARM: dts: rmobile: Scrub unused DT nodesMarek Vasut
Remove DT nodes which are not used by U-Boot, like audio and video in/out nodes. This saves about 35 kiB on the resulting U-Boot binary without any impact on functionality. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge branch 'migrate-various-PHY-options'Tom Rini
- Finish migration of CONFIG_PHYLIB and a number of related symbols to defconfig files.
2020-04-28configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Convert CONFIG_PHYLIB et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_PHYLIB CONFIG_BITBANGMII CONFIG_MV88E6352_SWITCH CONFIG_MV88E61XX_SWITCH CONFIG_PHYLIB_10G CONFIG_PHY_AQUANTIA CONFIG_PHY_ATHEROS CONFIG_PHY_BROADCOM CONFIG_PHY_CORTINA CONFIG_PHY_DAVICOM CONFIG_PHY_ET1011C CONFIG_PHY_LXT CONFIG_PHY_MARVELL CONFIG_PHY_MICREL CONFIG_PHY_NATSEMI CONFIG_PHY_REALTEK CONFIG_RTL8211X_PHY_FORCE_MASTER CONFIG_PHY_SMSC CONFIG_PHY_TERANETICS CONFIG_PHY_TI CONFIG_PHY_VITESSE CONFIG_PHY_XILINX Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28sunxi: Fix PHY regression on A20-OLinuXino-Lime2 and A20-Olimex-SOM-EVBTom Rini
When moving the PHYLIB PHY drivers around in Kconfig we did not at the same time perform a careful migration of the related drivers and sub-options. This lead to the case where previously Kconfig-enabled driver choices were now disabled on some platforms. Correct this by enabling both the PHY driver and sub-option on the above referenced platforms. Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") Fixes: 8728c97eff5b ("configs: Re-sync") Reported-by: Dario <dario86@tutamail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28Prepare v2020.07-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28kbuild: SPL/TPL: generate separate asm-offsets.h for SPL and TPLMasahiro Yamada
Currently generic-asm-offsets.h and asm-offsets.h are generated based on U-Boot proper config options. The same asm-offsets headers are used for building U-Boot SPL/TPL, which causes potential offset mismatch if U-Boot proper has different config options from U-Boot SPL/TPL. This commit adds: spl/include/generated/(generic-)asm-offsets.h tpl/include/generated/(generic-)asm-offsets.h spl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_SPL=y, and included when building SPL. tpl/include/generated/(generic-)asm-offsets.h is generated if CONFIG_TPL=y, and included when building TPL. They are created before Kbuild descends into SPL/TPL object directories and builds $(obj)/dts/dt-platdata.o because $(obj)/dts/dt-platdata.c includes a bunch of headers. Prepend -I$(obj)/include to $(UBOOTINCLUDE) so (generic-)asm-offsets.h is searched in {spl,tpl}/include/generated/. Requested-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2020-04-28ARM: dts: rmobile: Synchronize Gen3 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen3 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28ARM: dts: rmobile: Synchronize Gen2 DTs with Linux 5.6.2Marek Vasut
Synchronize R-Car Gen2 device trees with Linux 5.6.2, commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28ARM: rmobile: Unify Gen3 Salvator-X(S) and ULCB defconfigsMarek Vasut
The r8a779{5,6,65}_salvator-x and r8a779{5,6,65}_ulcb_defconfig were building the same target, except for the default DT. The default DT is however only a detail, as the actual DT to be used to configure U-Boot is detected automatically based on the CPU ID, hence the default DT is not meaningful. Unify each three defconfigs per board to reduce the duplication. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2020-04-28Merge tag 'u-boot-amlogic-20200428' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - fix sd-emmc controller A init on G12A/G12B/SM1 SoCs - add GXBB USB PHY driver - enable access to SPI NOR Flash on VIM2 and VIM3/VIM3L boards - fix USB PHYs Power-Up on on VIM3/VIM3L boards
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- DWC2/DWC3 improvements - Assorted bugfixes
2020-04-28Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
2020-04-28Merge tag 'dm-pull-27apr20' of git://git.denx.de/u-boot-dmTom Rini
Move Python tools to use absolute paths Minor buildman fixes for new features Make libfdt code more similar to upsteam
2020-04-28lx2160a : Update eMMC boot environment variableMeenakshi Aggarwal
Update mcinitcmd and bootcmd environment variable for emmc boot. Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls208xa: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1028a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28configs: ls1088a: Enable GIC_V3_ITS configHou Zhiqiang
Enable GIC_V3_ITS config to initialize the GIC redistributor tables. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Move GIC RD tables init to soc.cHou Zhiqiang
Move GIC redistributor tables initialization to CPU setup function. This patch introduces a GIC redistributor tables init function, and moves the function of reserving memory for GIC redistributor tables to soc.c and adds a argument for the memory size to reserve, BTW rename the function so that it is more readable. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28fsl-layerscape: Kconfig: Select RESV_RAM if GIC_V3_ITSHou Zhiqiang
The GIC redistributor tables initialization depends on RESV_RAM config, so select RESV_RAM if GIC_V3_ITS is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Align RD tables address to 64KBHou Zhiqiang
As the lower 16bit of the redistributor pending table is reserved for describing the memory attributes, we must give a 64KB aligned address to the GIC LPI initialization function. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-04-28board: lx2160a: Add check in GIC RD tables initHou Zhiqiang
Program the GIC redistributor tables only when succeeded to reserve memory for them, otherwise kernel will lose the chance to program them using allocated memory. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-28 14:53:07 +0000