summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-05-19drivers: net: fsl-mc: fixup msi-map propertyLaurentiu Tudor
Similarly to iommu-map, the msi-map property must also be fixed up in the device tree, in order for the icid -> streamid translation be possible in the MSI case as well. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Diana Craciun <diana.craciun@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19driver: net: fm: minor fix in DM ETH supportMadalin Bucur
Bus callback functions for read/write/reset need to be set only for DM_ETH, moving endif a bit lower. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Unset ENV_ADDR valueKuldeep Singh
LS1012A-FRWY and LS1012A-RDB crashes in flash environment when CONFIG_ENV_ADDR value is set. Unset the config value in *_tfa_defconfig* to resolve booting crash. Following crash is observed: Using SERDES1 Protocol: 13576 (0x3508) "Synchronous Abort" handler, esr 0x96000006 elr: 00000000820452c0 lr : 0000000082013f54 (reloc) elr: 00000000b7b932c0 lr : 00000000b7b61f54 x0 : 0000000000000000 x1 : 000000007604e004 x2 : 0000000000000001 x3 : 0000000000000000 ... Code: 54ffff80 9100c000 17fffff7 f9402241 (3860c820) Resetting CPU ... Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: nxp: Enable CONFIG_SYS_RELOC_GD_ENV_ADDRKuldeep Singh
Commit 323d3af59fe4 ("configs: ls1012ardb: Enable CONFIG_SYS_RELOC_GD_ENV_ADDR") enables the config only for LS1012ARDB. Apart from LS1012A-RDB, other platforms such as LS1012A-FRWY, LS2088A and LS1046A-RDB/FRWY also require this config to be enabled. This also helps in resolving booting crash observed in flash environment. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Reduce CONFIG_ENV_SIZE to 0x2000Ashish Kumar
All LS1012A board variants have same CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE values. If both config values are same, flash environment cannot be saved. Since, CONFIG_ENV_SECT_SIZE needs to be same as that of flash sector size, this entry cannot be changed. Reduce CONFIG_ENV_SIZE value to 0x2000. This also helps in making config value aligned with other boards environemt size. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Ashish Kumar <Ashish.kumar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Increase CONFIG_SYS_MALLOC_LEN sizeKuldeep Singh
CONFIG_SYS_MALLOC_LEN is currently set to low value and leaves very less space to do malloc in flash environmet. Increase the value to get more memory and also make it align with other boards(ls1046a, ls1043a etc.) config values. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080ardb: Make BOOT command access flash memory as per spi-memKuldeep Singh
BOOT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080ardb: Make MC_INIT access flash memory as per spi-memKuldeep Singh
MC_INIT command currently access spi-nor flash memory directly. As per spi-mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1046a: Define ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. The macro value is already defined in ls1046ardb_tfa_defconfig, also define the value as 0x40300000 in qspi_defconfig. ls1046aqds has one spansion flash "S25FL128S_64K" of size 16M with sector size 64K. Correct ENV_ADDR and ENV_SECT_SIZE value for QSPI and TFA defconfigs of the board. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls2080a: Correct ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. QSPI region in LS2088ARDB and LS2088AQDS starts from 0x20000000 offset. Correct the config value i.e 0x80500000 -> 0x20500000. Also, define config value as 0x20300000 in qspi defconfig. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1088a: Correct ENV_ADDR valueKuldeep Singh
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. QSPI region starts from 0x20000000 offset. Correct the config value i.e 0x80500000 -> 0x20500000. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19treewide: Update fsl qspi node dt properties as per spi-mem driverKuldeep Singh
According to new qspi driver, some properties like "bus-num, num-cs, big-endian" are no longer used. Device endiannes can be determined from device-type data in driver. Now use board specific compatibles, generic node names and specific labels to align with linux device-tree properties. Also consolidate spi-max-frequency to 50Mhz treewide. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1046a: Move SPI_FLASH_SPANSION to defconfigKuldeep Singh
Enable CONFIG_SPI_FLASH_SPANSION in defconfigs of LS1046ARDB and LS1046AQDS which have two spansion flases i.e s25fs512s each of size 64M. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1012a: Enable CONFIG_SPI_FLASH_SPANSION in defconfigsKuldeep Singh
Since CONFIG_FSL_QSPI is already enabled for LS1012A in defconfigs. Also enable CONFIG_SPI_FLASH_SPANSION for LS1012A boards having spansion flashes. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19configs: ls1043a: Move CONFIG_FSL_QSPI and SPI_FLASH_SPANSION to defconfigKuldeep Singh
Move CONFIG_FSL_QSPI to the board defconfigs and while at it also move CONFIG_SPI_FLASH_SPANSION for LS1043AQDS. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19treewide: Remove unused FSL QSPI config options for Layerscape platformsKuldeep Singh
Some of these options are not used by the driver anymore and some of them are obsolete as the information is gathered from the dt. Also consolidating defines in common headers. Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-18common: Drop linux/bitops.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Use __ASSEMBLY__ as the assembly macrosSimon Glass
Some places use __ASSEMBLER__ instead which does not work since the Makefile does not define it. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/delay.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to udelay()Simon Glass
Fix up some incorrect code style in calls to functions in the linux/time.h header, mostly udelay(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/stringify.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop linux/bug.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm_offsets.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop asm/ptrace.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop log.h from common headerSimon Glass
Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Fix some checkpatch warnings in calls to debug()Simon Glass
Fix up some incorrect code style in calls to functions in the log.h header, mostly debug(). Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18command: Remove the cmd_tbl_t typedefSimon Glass
We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop init.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop image.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop bootstage.h from common headerSimon Glass
Move this fairly uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18bootstage: Use BOOTSTAGE instead of BOOTSTATESimon Glass
Some of the enum members are wrong. Fix them. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop part.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18part: Drop disk_partition_t typedefSimon Glass
We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop net.h from common headerSimon Glass
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18arm: Don't include common.h in header filesSimon Glass
It is bad practice to include common.h in other header files since it can bring in any number of superfluous definitions. It implies that some C files don't include it and thus may be missing CONFIG options that are set up by that file. The C files should include these themselves. Update some header files in arch/arm to drop this. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop flash.h from common headerSimon Glass
Move this uncommon header out of the common header. Fix up some style problems in flash.h while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18flash: Tidy up coding style for flash functionsSimon Glass
Some functions use the wrong code style and generate checkpatch errors. Fix these. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18common: Drop uuid.h from common headerSimon Glass
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18Merge tag 'efi-2020-07-rc3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-07-rc3 A series of patches introduces the possibility to manage UEFI variables via an OP-TEE module. CONFIG_EFI_MM_COMM_TEE enables this. If this option is not specified the U-Boot behavior remains unchanged. A defconfig is provided for compile testing (lx2160ardb_tfa_stmm_defconfig). An incorrect UEFI memory allocation for fsl-layerscape is fixed
2020-05-17dts: nxp2160ardb: add op-tee nodeIlias Apalodimas
A defconfig is added on lx2160ardb which allows UEFI variable management via OP-TEE. Enable the the node in the relevant DTS file. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-05-17configs: lx2160a: Add default config for lx2160a using StMM in OP-TEEIlias Apalodimas
Previous patches allow UEFI secure variables to be stored in an RPMB device using OPTEE. Add a config for the lx2160a hardware so the feature gets at least compiled. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Remove superfluous differences to lx2160ardb_tfa_defconfig. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17doc: uefi.rst: Add OP-TEE variable storage config optionsIlias Apalodimas
If OP-TEE is compiled with an EDK2 application running in secure world it can process and store UEFI variables in an RPMB. Add documentation for the config options enabling this. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17MAINTAINERS: Add maintainer for EFI variables via OP-TEEIlias Apalodimas
Add myself as maintainer for the OP-TEE related UEFI variable storage. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17cmd: efidebug: Add support for querying UEFI variable storageIlias Apalodimas
With the previous patches that use OP-TEE and StandAloneMM for UEFI variable storage we've added functionality for efi_query_variable_info. So let's add the relevant command to efidebug and retrieve information about the container used to store UEFI variables Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-05-17efi_loader: Implement EFI variable handling via OP-TEEIlias Apalodimas
In OP-TEE we can run EDK2's StandAloneMM on a secure partition. StandAloneMM is responsible for the UEFI variable support. In combination with OP-TEE and it's U-Boot supplicant, variables are authenticated/validated in secure world and stored on an RPMB partition. So let's add a new config option in U-Boot implementing the necessary calls to OP-TEE for the variable management. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Pipat Methavanitpong <pipat1010@gmail.com> Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17efi_loader: Add headers for EDK2 StandAloneMM communicationSughosh Ganu
In Arm devices OP-TEE has the ability to run StandAloneMM (from EDK2) in a separate partition and handle UEFI variables. A following patch introduces this functionality. Add the headers needed for OP-TEE <--> StandAloneMM communication Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-17efi_loader: round the memory area in efi_add_memory_map()Michael Walle
Virtually all callers of this function do the rounding on their own. Some do it right, some don't. Instead of doing this in each caller, do the rounding in efi_add_memory_map(). Change the size parameter to bytes instead of pages and remove aligning and size calculation in all callers. There is no more need to make the original efi_add_memory_map() (which takes pages as size) available outside the module. Thus rename it to efi_add_memory_map_pg() and make it static to prevent further misuse outside the module. Signed-off-by: Michael Walle <michael@walle.cc> Add missing comma in sunxi_display.c. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-05-15Merge branch '2020-05-15-kconfig-migrations'Tom Rini
- Convert CONFIG_DELAY_ENVIRONMENT to Kconfig and update initr_pci to be Kconfig'd.
2020-05-15qemu-x86*_defconfig: Enable CONFIG_PCI_INIT_ROvidiu Panait
Enable CONFIG_PCI_INIT_R for qemux86 and qemux86-64 pci enumeration during boot in order to eliminate the custom preboot commands in include/configs/qemu-x86.h. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-05-15qemu_arm_defconfig: Enable CONFIG_PCI_INIT_ROvidiu Panait
Replace the "pci enum" preboot sequence with CONFIG_PCI_INIT_R=y. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
generated by cgit (git 2.34.1) at 2025-02-14 10:59:40 +0000