summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-02-07net: fec_mxc: Fix corruption of device tree blobDaniel Strnad
Modifying content of dev->name leads to the device tree corruption because it points to the node name located there. Signed-off-by: Daniel Strnad <strnadda@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: designware: Fix for use with current Linux device tree for Meson GXHeiner Kallweit
In Uboot for Meson GX the compatible string in meson-gxbb.dtsi so far is: compatible = "amlogic,meson6-dwmac", "snps,dwmac"; On Linux in the same dt file it's compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; To avoid breaking ethernet with the next DT synch from Linux to U-Boot (planned as prerequisite for adding Meson GX MMC driver to U-Boot) add "amlogic,meson-gx-dwmac" to the compatibility list in the designware driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: dp83867: Add support for MAC impedance configurationMugunthan V N
Add support for programmable MAC impedance configuration and fix typo in DT impedance parameters names. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: vitesse: Fix cis8204 RGMII_ID codePhil Edworthy
Commit 79e86ccb3786c8b20004db3fa10a70049456f580 "vitesse: remove duplicated argument to ||" correctly removed a redundant check. However, I believe that the original code was simply wrong, and should have been checking against RGMII_ID. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Marvell: Use phy_interface_is_rgmii helper functionPhil Edworthy
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Add support for Marvell M88E1512Phil Edworthy
This device also works with the 88E1518 code, so we just adjust the UID mask accordingly. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: Fix mask so that we can identify Marvell 88E1518Phil Edworthy
The mask for the 88E1510 meant that the 88E1518 code would never be used. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: phy: ti: Fix dp83867 RGMII_TXID interface pathPhil Edworthy
There is code that is specifically for RGMII_TXID interface, but this will never get used because the code checks that the RGMII interface is RGMII_ID to RGMII_RXID; RGMII_TXID is after this. To fix this and avoid similar problems in the future, use the phy_interface_is_rgmii helper function. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07tools: Add tool to add crc8 to a mac addressoliver@schinagl.nl
This patch adds a little tool that takes a generic MAC address and generates a CRC byte for it. The output is the full MAC address without any separators, ready written into an EEPROM. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07tools: Allow crc8 to be usedoliver@schinagl.nl
This patch enables crc8 to be used from within the tools directory using u-boot/crc.h. Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
2017-02-07net: core: cosmetic: A MAC address is not limited to SROMoliver@schinagl.nl
Currently, we print that the MAC from the SROM does not match. It can be many forms of ROM, so lets drop the S. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: cosmetic: Define ethernet name lengtholiver@schinagl.nl
There are various places where the ethernet device name is defined to several different sizes. Lets add a define and start using it. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: cosmetic: Make the MAC address string less magicaloliver@schinagl.nl
In u-boot printf has been extended with the %pM formatter to allow printing of MAC addresses. However buffers that want to store a MAC address cannot safely get the size. Add a define for this case so the string of a MAC address can be reliably obtained. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: cosmetic: Do not use magic values for ARP_HLENoliver@schinagl.nl
Commit 674bb249825a ("net: cosmetic: Replace magic numbers in arp.c with constants") introduced a nice define to replace the magic value 6 for the ethernet hardware address. Replace more hardcoded instances of 6 which really reference the ARP_HLEN (iow the MAC/Hardware/Ethernet address). Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: macb: Remove redundant #ifdef CONFIG_DM_ETHWenyou Yang
Remove the redundant #ifdef CONFIG_DM_ETH/#endif. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: macb: Add the clock supportWenyou Yang
Due to introducing the at91 clock driver, add the clock support. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-02-07net: Kconfig: Add CONFIG_MACB optionWenyou Yang
Add CONFIG_MACB option in KConfig to be used to select the Cadence MACB Ethernet driver. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
2017-02-07x86: make LOAD_FROM_32_BIT visible for platformsAndy Shevchenko
This option is useful not only for development, but for the platforms where U-Boot is run from custom ROM bootloader. For example, Intel Edison is that board. Make this option visible that platforms can select it if needed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: qemu: Add a config for 64-bit U-BootBin Meng
Add a new board config which uses 64-bit U-Boot. Supported features are the same as the other 64-bit board (Google Chromebook Link). It is a start for us to test 64-bit U-Boot easily without the need to access a real hardware. Note CONFIG_SPL_ENV_SUPPORT is required for QEMU 64-bit as without this the SPL build fails at the end. This is just a workaround as CONFIG_SPL_ENV_SUPPORT is not needed at all. common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate' lib/built-in.o: In function `hsearch_r': lib/hashtable.c:380: undefined reference to 'env_callback_init' lib/hashtable.c:382: undefined reference to 'env_flags_init' make[1]: *** [spl/u-boot-spl] Error 1 Except those SPL options required by 64-bit, compared to 32-bit config, the following options are different: - CONFIG_SYS_MALLOC_F_LEN has to be increased to 0x1000 for SPL. - CONFIG_DEBUG_UART has to be included due to the weird issue. See TODO comments in arch/x86/cpu/x86_64/cpu.c:arch_setup_gd(). Once this issue gets fixed, debug uart can be optional. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Add build options for SPLBin Meng
If SPL is used we want to use the generic SPL framework and boot from SPI via a board-specific means. Add these options to the board config file. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Add a text base for 64-bit U-BootBin Meng
Set up the 64-bit U-Boot text base if building for that target. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07tools: binman: Handle optional microcode case in SPL imageBin Meng
On platforms which do not require microcode in SPL, handle such case like U-Boot proper. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07tools: binman: Call correct init for Entry_u_boot_spl_with_ucode_ptrBin Meng
u_boot_spl_with_ucode_ptr is derived from u_boot_with_ucode_ptr, hence it should call its parent's init. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Mark ucode as optional for SPL in u-boot.dtsiBin Meng
QEMU does not need ucode and this is indicated in u-boot.dtsi for U-Boot proper. Now add the same for SPL. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Set up device tree for SPLBin Meng
Add the correct pre-relocation tag so that the required device tree nodes are present in the SPL device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Fix compiler warnings for 64-bitBin Meng
This fixes compiler warnings for QEMU in 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Hide arch_cpu_init() and print_cpuinfo() for U-Boot properBin Meng
arch_cpu_init() and print_cpuinfo() should be only available in SPL build. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: Compile irq.c for 64-bitBin Meng
There is no reason not to compile irq.c for 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: spl: Add weak arch_cpu_init_dm()Bin Meng
arch_cpu_init_dm() might not be implemented by every platform. Implement a weak version for SPL. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: Wrap print_ch() with config optionBin Meng
print_ch() should not be used if DEBUG_UART is off. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: qemu: Add missing DECLARE_GLOBAL_DATA_PTR in e820.cBin Meng
DECLARE_GLOBAL_DATA_PTR is missing which causes 64-bit build error. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-02-07x86: link: Add a config for 64-bit U-BootSimon Glass
Add a new board config which uses 64-bit U-Boot. This is not fully functional but is it a start. Missing features: - SDRAM sizing - Booting linux - EFI support - SCSI device init (and others) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Update compile/link flags to support 64-bit U-BootSimon Glass
Update config.mk settings to support both 32-bit and 64-bit U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Add build options for SPLSimon Glass
If SPL is used we want to use the generic SPL framework and boot from SPI via a board-specific means. Add these options to the board config file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Set up device tree for SPLSimon Glass
Add the correct pre-relocation tag so that the required device tree nodes are present in the SPL device tree. On x86 it doesn't make a lot of sense to have a separate SPL device tree. Since everything is in the same ROM we might as well just use the main device tree in both SPL and U-Boot proper. But we haven't implemented that, so this is a good first step. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Add SPL declarations to the binman imageSimon Glass
When building for 64-bit we need to put an SPL binary into the image. Update the binman image description to reflect this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: link: Add a text base for 64-bit U-BootSimon Glass
Set up the 64-bit U-Boot text base if building for that target. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Add a dummy setjmp implementation for x86_64Simon Glass
We don't have the code for this yet. Add a dummy version for now, so that EFI builds correctly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move setjmp to the i386 directorySimon Glass
This code is only used in 32-bit mode. Move it so that it does not get built with 64-bit U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move call64 to the i386 directorySimon Glass
This code is only used in 32-bit mode. Move it so that it does not get built with 64-bit U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Change irq_already_routed to a local variableSimon Glass
This avoids using BSS before SDRAM is set up in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move turbo_state to global_dataSimon Glass
To avoid using BSS in SPL before SDRAM is set up, move this field to global_data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-07x86: Move pirq_routing_table to global_dataSimon Glass
To avoid using BSS in SPL before SDRAM is set up, move this field to global_data. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Support jumping from SPL to U-BootSimon Glass
Add a rough function to handle jumping from 32-bit SPL to 64-bit U-Boot. This still needs work to clean it up. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Drop interrupt support in 64-bit modeSimon Glass
This is not currently supported, so drop the code. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't try to boot Linux from SPLSimon Glass
Booting into linux from 64-bit U-Boot is not yet supported. Avoid bringing in the bootm code until it is implemented. Of course 32-bit U-Boot still supports booting into both 32- and 64-bit kernels. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't build 32-bit efi files on x86_64Simon Glass
These cannot be built in this mode, so drop them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't build cpu files which are not supported on 64-bitSimon Glass
Some files cannot be built with 64-bit and mostly don't make sense in that context. Disable them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't build call64 and setjmp on 64-bitSimon Glass
These are currently not supported. Calling 64-bit code from 64-bit U-Boot is much simpler, so this code is not needed. setjmp() is not yet implemented for 64-bit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2017-02-06x86: Don't try to run the VGA BIOS in 64-bit modeSimon Glass
This is not supported, so disable it for now. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit (git 2.34.1) at 2025-02-09 23:40:44 +0000