summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-04-22bcm968580xref: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm968580xref: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm968580xref. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm6858: add nand controllerPhilippe Reynes
Add the nand controller in the bcm6858 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22bcm968380gerg: add nand supportPhilippe Reynes
Enable the nand support (driver and command) in the configuration of the board bcm96838gerg. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm968380gerg: enable nand controllerPhilippe Reynes
Enable the nand controller in the device tree of the board bcm96838gerg. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22dt: bcm6838: add nand controllerPhilippe Reynes
Add the nand controller in the bcm6838 device tree. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add an option to read the write-protect from device ↵Philippe Reynes
tree The option write-protect may only change on the kernel command line, we add a property in the device tree to be more flexible. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add parameter parameter-page-big-endianPhilippe Reynes
The parameter page isn't always in big endian, so we add an option to choose the endiannes of the parameter page. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22drivers: nand: brcmnand: add initial supportPhilippe Reynes
The driver brcmnand come from linux kernel 4.18. Only SoC bcm6838 and bcm6858 are supported. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22compat linux: import completion from linux 4.18Philippe Reynes
This patch port the file include/linux/completion.h from linux 4.18 to u-boot. It define the structure but all the function are stubbed. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22include: linux: io: define devm_ioremap on board with ioremapPhilippe Reynes
The macro devm_ioremap is only defined for configuration that doesn't have ioremap. But this macro may also be defined on configuration with ioremap. This patch remove the condition for the macro devm_ioremap, so it's always defined. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22arm: asm: io.h: define readX_relaxed and writeX_relaxedPhilippe Reynes
This patch port the function readX_relaxed and writeX_relaxed from kernel 4.18. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: provide several helpers to do common NAND operationsBoris Brezillon
Linux commit 97d90da8a88 ("mtd: nand: provide several helpers to do common NAND operations") This is part of the process of removing direct calls to ->cmdfunc() outside of the core in order to introduce a better interface to execute NAND operations. Here we provide several helpers and make use of them to remove all direct calls to ->cmdfunc(). This way, we can easily modify those helpers to make use of the new ->exec_op() interface when available. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [miquel.raynal@free-electrons.com: rebased and fixed some conflicts] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: nand: import nand_hw_control_init()Marc Gonzalez
Linux commit d45bc58dd3b ("mtd: nand: import nand_hw_control_init()") The code to initialize a struct nand_hw_control is duplicated across several drivers. Factorize it using an inline function. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Philippe Reynes: adapt code to u-boot and only keep new function] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22mtd: add get/set of_node/flash_node helpersBrian Norris
Linux commit 28b8b26b308 ("mtd: add get/set of_node/flash_node helpers") We are going to begin using the mtd->dev.of_node field for MTD device nodes, so let's add helpers for it. Also, we'll be making some conversions on spi_nor (and nand_chip eventually) too, so get that ready with their own helpers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> [Philippe Reynes: only add function nand_set_flash_node and nand_get_flash_node because others were already backported] Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
2019-04-22Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmelTom Rini
Second set of u-boot-atmel features and fixes for 2019.07 cycle
2019-04-22at91: corvus_defconfig: get rid of build warningsHeiko Schocher
fix CONFIG_OF_EMBED and add CONFIG_DM_USB build warnings. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-usbTom Rini
- Various fastboot, dwc2/stm32 updates
2019-04-21Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini
- Various stratix10, gen5 updates
2019-04-21usb: dwc2: fix gadget disconnectFabrice Gasnier
This fixes a disconnect issue detected with fastboot command, when using dwc2 driver. - On u-boot side: uboot>$ fastboot 0 - On USB host PC side, few seconds after PC>$ fastboot reboot # Get stuck, uboot target never reboots By enabling DEBUG_ISR logs, the bus suspend interrupt is seen before the PC command has been issued. When the USB bus suspend occurs, there's a HACK that disables the fastboot (composite driver). Here is the call stack upon USB bus suspend: - dwc2_handle_usb_suspend_intr() - dev->driver->disconnect() - composite_disconnect() - reset_config() - f->disable() - fastboot_disable() - usb_ep_disable(f_fb->out_ep); - usb_ep_disable(f_fb->in_ep); .. other disable calls. When the resume interrupt happens, everything has been disabled, then nothing happens. fastboot command gets stuck on HOST side. Remove original HACK, that disconnects the composite driver upon USB bus suspend. Implement disconnect detection instead: - check GINTSTS OTG interrupt - read GOTGINT register - check GOTGINT, SesEndDet bit (e.g. session end) This is inspired by what is implemented currently in Linux dwc2 driver. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-04-21usb: reload watchdog during ums commandPatrick Delaunay
Reload the watchdog in the mass storage command ums to avoid reboot during the usb waiting loop when the host doesn't send any request. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21fastboot: add support for 'getvar platform'Eugeniu Rosca
Our R-Car3 Android userspace relies on the output of 'fastboot getvar platform' and U-Boot currently is not able to handle it: host $> fastboot getvar platform getvar:platform FAILED (remote: Variable not implemented) finished. total time: 0.001s We either have the option of adding 'fastboot.platform' variable to the default/saved environment as a workaround or add proper 'fastboot getvar platform' support in U-Boot via this patch. In the latter case, other platforms can benefit from it too. Note that R-Car3 already exports 'platform' environment variable via v2019.01 commit 00e4b57e9e71c3 ("ARM: rmobile: Set environment variable containing CPU type"). Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-04-21fastboot: Replace literal 32 with PART_NAME_LENAlex Kiernan
Where we have to compute partition names, rather than using a hardcoded 32 for the partition name length, replace with PART_NAME_LEN. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
2019-04-21stm32mp1: add stusb1600 support for DK1 and DK2 boardPatrick Delaunay
The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21stm32mp1: migrate USBOTG device to driver modelPatrick Delaunay
Use the DWC2 device driver with DM_USB_GADGET support and cleanup the USB support in STM32MP1 board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBOPatrick Delaunay
Remove the HOST support for STM32MP1 USBO device = OTG DWC2. The current DWC2 driver have no dynamic detection of device, So it is dangerous to have start 3V3 when PC is connected to the micro USB connector. => it is preferable to have only DEVICE support CONFIG_USB_GADGET_DWC2_OTG for OTG port See DWC3 driver for clean dual role support... Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21usb: dwc2: add support for STM32MP1Patrick Delaunay
Add compatible "st,stm32mp1-hsotg" and associated driver data to manage the usb33d-supply and the ST specific register for VBus sensing. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> # Conflicts: # drivers/usb/gadget/dwc2_udc_otg.c Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2_udc_otg: Add tx_fifo_sz array supportPatrice Chotard
All TX fifo size can be different, add tx_fifo_sz_array[] into dwc2_plat_otg_data to be able to set them. tx_fifo_sz_array[] is 17 Bytes long and can contains max 16 tx fifo size (synopsys IP supports max 16 IN endpoints). First entry of tx_fifo_sz_array[] is the number of valid fifo size the array contains. In case of tx_fifo_sz_array[] doesn't contains the same number of element than max hardware endpoint, display a warning message. Compatibility with board which doesn't use tx_fifo_sz_array[] (Rockchip rk322x/rk3128/rv1108/rk3288/rk3036) is kept. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 registerPatrick Delaunay
Some DWC2 ip variant doesn't use 16 hardware endpoint as hardcoded in the driver. Bits INEps [29:26] of HWCFG4 register allows to get this information. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add function for session B checkPatrick Delaunay
Add a new function to check the session B validity, to be use to check cable connection. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: Add force-b-session-valid supportPatrick Delaunay
Handle "force-b-session-valid" property from DT. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: force reset assert before to probe the driverPatrick Delaunay
Reset the hardware to be sure of the device state. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: convert driver to DM_USB_GADGETPatrick Delaunay
Minimal conversion to driver model by using the uclass UCLASS_USB_GADGET_GENERIC based on: - reset uclass - clock uclass - generic uclass. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21usb: dwc2: remove unused variable regs_otgPatrick Delaunay
Remove the global regs_otg variable. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-21phy: usbphyc: increase PLL wait timeoutPatrick Delaunay
wait 200us to solve USB init issue on device mode (ums and stm32prog commands) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21phy: usbphyc: move vdda1v1 and vdda1v8 in phy_initPatrick Delaunay
vdda1v1 and vdda1v8 are used by the PLL. Both need to be enabled before starting the PLL. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21phy: usbphyc: Binding update of vdda supplyPatrick Delaunay
Move supply vdda1v1 and vdda1v8 in usbphyc node and no more in port Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21phy: usbphyc: update xlate with DT bindingPatrick Delaunay
Parameter added for port 1, for example: &usbh_ehci { phys = <&usbphyc_port0>; phy-names = "usb"; vbus-supply = <&vbus_sw>; status = "okay"; }; &usbotg_hs { pinctrl-names = "default"; pinctrl-0 = <&usbotg_hs_pins_a>; phys = <&usbphyc_port1 0>; phy-names = "usb2-phy"; status = "okay"; }; Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21phy: usbphyc: remove unused variable indexPatrick Delaunay
Remove unused field index in struct stm32_usbphyc_phy. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-21fastboot: Improve error reporting on 'getvar partition-{size, type}'Eugeniu Rosca
Currently U-Boot reports the same error message in all below cases: [A] host> fastboot getvar partition-type [B] host> fastboot getvar partition-size [C] host> fastboot getvar partition-type: [D] host> fastboot getvar partition-size: [E] host> fastboot getvar partition-type:<invalid-part> [F] host> fastboot getvar partition-size:<invalid-part> The message looks like: host> fastboot getvar partition-size: getvar:partition-size: FAILED (remote: partition not found) Finished. Total time: 0.003s Be more user friendly and output: - "partition not given" for [A-D] - "partition not found" for [E-F] Fixes: f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-21fastboot: getvar: correct/rename "has_slot" to "has-slot"Eugeniu Rosca
Since its inception in upstream fastboot android-n-preview-1 [1], "has-slot" option has never taken the form of "has_slot". Amongst the users of "getvar has-slot:" is the upstream bootloadertest.py [2]. Current U-Boot "has_slot" version must be a typo. Fix it. [1] https://android.googlesource.com/platform/system/core/+/a797479bd51c ("Fix fastboot variable name") [2] https://android.googlesource.com/platform/system/extras/+/72de393e118e3 ("Bootloader verification for AndroidThings.") Fixes: f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Acked-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-21dfu: Avoid declaring unused variables and absent parametersAndy Shevchenko
The compiler is not happy when neither USB nor TFTP transport for DFU defined: cmd/dfu.c: In function ‘do_dfu’: cmd/dfu.c:31:8: warning: unused variable ‘devstring’ [-Wunused-variable] char *devstring = argv[3]; ^~~~~~~~~ cmd/dfu.c:30:8: warning: unused variable ‘interface’ [-Wunused-variable] char *interface = argv[2]; ^~~~~~~~~ Surround those variables by #ifdef expression. More serious, that comes under same circumstances, is a compilation error due to absence of macro parameter: In file included from include/image.h:45, from include/common.h:35, from cmd/dfu.c:13: include/command.h:207:24: error: expected expression before ‘,’ token # define _CMD_HELP(x) x, ^ include/command.h:286:18: note: in expansion of macro ‘_CMD_HELP’ _cmd, _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) } ^~~~~~~~~ include/command.h:290:3: note: in expansion of macro ‘U_BOOT_CMD_MKENT_COMPLETE’ U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \ ^~~~~~~~~~~~~~~~~~~~~~~~~ include/command.h:332:2: note: in expansion of macro ‘U_BOOT_CMD_COMPLETE’ U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL) ^~~~~~~~~~~~~~~~~~~ cmd/dfu.c:70:1: note: in expansion of macro ‘U_BOOT_CMD’ U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu, ^~~~~~~~~~ make[1]: *** [scripts/Makefile.build:279: cmd/dfu.o] Error 1 make: *** [Makefile:1518: cmd] Error 2 Put empty string unconditionally to have macro parameter present. Fixes: 0f44d33536a5 ("dfu: Fix up the Kconfig mess") Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Lukasz Majewski <lukma@denx.de>
2019-04-19usb: Select USB_MUSB_DSPS with USB_MUSB_TIAlex Kiernan
USB_MUSB_TI requires USB_MUSB_DSPS, failing at link time if it's not selected: drivers/usb/musb-new/built-in.o: In function `ti_musb_host_ofdata_to_platdata': drivers/usb/musb-new/ti-musb.c:193: undefined reference to `musb_dsps_ops' or if OF_CONTROL is not selected: arch/arm/mach-omap2/built-in.o:(.data.usb0+0x24): undefined reference to `musb_dsps_ops' Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at> Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at> Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-19configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to KconfigAlex Kiernan
Migrate support for disable MUSB bulk split/combine to Kconfig Green Travis build: https://travis-ci.org/akiernan/u-boot/builds/519101867 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2019-04-18Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arcTom Rini
In this small series we migrate ARC boards to DM_MMC so we're hopefully are good now and our boards will be kept in U-Boot for some more time :)
2019-04-18board: sama5d2_icp: Enable MACB driverRazvan Stefanescu
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
2019-04-18ARM: dts: at91-sama5d2-icp: Add MACB nodeRazvan Stefanescu
MACB has a fixed link connection to KSZ8563 switch port. Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
2019-04-18board: atmel: add SAMA5D2 ICP boardEugen Hristev
The SAMA5D2 ICP Board features the SAMA5D27 SoC, together with QSPI Flash, Wilc3000 wireless device and EtherCat support. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2019-04-18ARC: [plat-axs10x]: migrate to DM_MMCEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2019-04-18ARC: [plat-hsdk]: migrate to DM_MMCEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
generated by cgit (git 2.34.1) at 2024-12-26 11:48:47 +0000