summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-24configs: odroid-xu3: enable the configs relevant to regulatorJaehoon Chung
Enable the CONFIG_CMD_REGULATOR and CONFIG_DM_REGULATOR_S2MPS11. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-24power: pmic: s2mps11: probe the regulator driverJaehoon Chung
Add the probe function to support the s2mps11 regulator driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-24power: regulator: s2mps11: add a regulator driver for s2mps11Jaehoon Chung
exynos5422 has the s2mps11 PMIC. s2mps11 pmic has the 10-BUCK and 38-LDO regulators. Each IP and devices in exynos5422 can be controlled by each regulators. This patch is support for s2mps11 regulator driver. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-22mmc: fsl_esdhc: Fix i.MX53 eSDHCv3 clockBenoît Thébaudeau
Commit 4f425280fa71 ("mmc: fsl_esdhc: Allow all supported prescaler values") made it possible to set SYSCTL.SDCLKFS to 0 in SDR mode on i.MX, thus bypassing the SD clock frequency prescaler, in order to be able to get higher SD clock frequencies in some contexts. However, that commit missed the fact that this value is illegal on the eSDHCv3 instance of the i.MX53. This seems to be the only exception on i.MX, this value being legal even for the eSDHCv2 instances of the i.MX53. Fix this issue by changing the minimum prescaler value for the single instance of the i.MX53 eSDHCv3 controller. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-01-22mmc: fix the wrong disabling clockJaehoon Chung
When power is off, clock is not disabling. Because it's passed to 1, mmc->clock should be set to f_min value. Some drivers can't initialize the eMMC/SD card with current status. This patch is to fix the disabling clock value to 0. Fixes: 2e7410d76ad1 ("mmc: disable the mmc clock during power off") Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Guillaume GARDET <guillaume.gardet@free.fr> Tested-by: Anand Moon <linux.amoon@gmail.com>
2018-01-22mmc: sdhci: change data transfer failure into debug messageMasahiro Yamada
During the tuning, drivers repeat data transfer, changing timing parameters in the controller hardware. So, the tuning commands (CMD19 for SD, CMD21 for eMMC) fail, and this is not a problem at all. Showing "Error detected..." in normal operation just make users upset. This should not be shown. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: sdhci-cadence: add HS200 supportMasahiro Yamada
Add HS200 timing setting and the MMC tuning callback. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
2018-01-22mmc: sdhci-cadence: call mmc_of_parse()Masahiro Yamada
This is needed to parse more capabilities such as mmc-hs200-1_8v. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: sdhci-cadence: use bitfield access macros for cleanupMasahiro Yamada
This driver is a counterpart from the one in Linux. Follow the clean-up I did in Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: sdhci: do not overwrite host_caps in sdhci_setup_cfg()Masahiro Yamada
This line overwrites host_cap that has been set by drivers and/or helpers like mmc_of_parse(). Accumulate capabilities flags. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: let mmc_of_parse() fail for insane bus-width valueMasahiro Yamada
You must fix your DT if it specifies insane bus-width, for example, bus-width = <3>; debug() is not displayed in usual configuration, so people will not even notice weirdness. Use dev_err() instead, then let it fail. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22mmc: do not overwrite cfg->f_max if "max-frequency" if missingMasahiro Yamada
mmc_of_parse() in U-Boot is a pussy helper; it sets cfg->f_max to 52MHz even if DT does not provide "max-frequency" at all. This can overwrite cfg->f_max that may have been set to a reasonable default. As the DT binding says, "max-frequency" is an optional property. Do nothing if DT does not specify it. This is the behavior of mmc_of_parse() in Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-22dm: add dev_read_u32()Masahiro Yamada
dev_read_u32_default() always returns something even when the property is missing. So, it is impossible to do nothing in the case. One solution is to use ofnode_read_u32() instead, but adding dev_read_u32() will be helpful. BTW, Linux has an equvalent function, device_property_read_u32(); it is clearer that it reads a property. I cannot understand the behavior of dev_read_u32() from its name. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-01-20Merge git://git.denx.de/u-boot-marvellTom Rini
2018-01-19Merge git://git.denx.de/u-boot-arcTom Rini
2018-01-19configs: keystone2: env: Fix burn_uboot_spi commandFaiz Abbas
Now the u-boot spi image is greater than 0x90000, increase the same in env during spi erase. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19checkpatch: Ignore 'short' Kconfig help entriesTom Rini
A 2 line help entry for a new Kconfig entry is, at this time, sufficient in some cases, so lets drop that warning for now. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-19powerpc: Drop unreferenced CONFIG_* definesTuomas Tynkkynen
The following config symbols are only defined once and never referenced anywhere else: CONFIG_CYRUS CONFIG_IDS8313 CONFIG_MPC8308_P1M CONFIG_MPC8308RDB CONFIG_MPC8349EMDS CONFIG_MPC8349ITXGP CONFIG_SBC8349 CONFIG_SBC8548 CONFIG_SBC8641D CONFIG_TQM834X CONFIG_VE8313 CONFIG_XPEDITE5140 CONFIG_XPEDITE5200 CONFIG_XPEDITE550X Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Acked-by: Mario Six <mario.six@gdsys.cc>
2018-01-19configs: stm32: move config flag from defconfig to KconfigPatrice Chotard
Move system flags from defconfig to mach-stm32/Kconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19serial: stm32: Rename serial_stm32x7.c to serial_stm32.cPatrice Chotard
Now this driver is used across stm32f4, stm32f7 and stm32h7 SoCs family, give it a generic name. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
2018-01-19m68k: Drop unreferenced CONFIG_* definesTuomas Tynkkynen
The following config symbols are only defined once and never referenced anywhere else: CONFIG_AMCORE CONFIG_ASTRO5373L CONFIG_M52277EVB CONFIG_M5253DEMO CONFIG_M5253EVBE CONFIG_M5275EVB CONFIG_M54418TWR CONFIG_STMARK2 Most of them are config symbols named after the respective boards which seems to have been a standard practice at some point. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19nds32: Drop unreferenced CONFIG_ADP_AG101PTuomas Tynkkynen
Seems to be again one of those CONFIG_ symbols named after a board, with nothing referencing it. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19pcmcia: Drop a bunch of unused CONFIG_SYS_PCMCIA_ macrosTuomas Tynkkynen
Last users of the following macros (for n = 0..7) were removed in commit 5b8e76c35ec312a ("powerpc, 8xx: remove support for 8xx"): CONFIG_SYS_PCMCIA_PBRn CONFIG_SYS_PCMCIA_PORn Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
2018-01-19Travis-CI: Add job for running test.py on qemu_arm64Tuomas Tynkkynen
The corresponding changes in the uboot-test-hooks repo are: https://github.com/swarren/uboot-test-hooks/pull/15 Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19Travis-CI: Download ARM64 version of GRUB as wellTuomas Tynkkynen
For preparation of adding AArch64 test.py jobs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19ARM: Document AArch64 version of qemu-armTuomas Tynkkynen
It's mostly obvious, except that QEMU is annoying and requires an explicit '-cpu cortex-a57' (or some other 64-bit core) to actually run in 64-bit mode. While at it, remove the references to setting the ARCH environment variable; that is not used in U-Boot. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19ARM: qemu-arm: Add support for AArch64Tuomas Tynkkynen
This adds support for '-machine virt' on AArch64. This is rather simple: we just add TARGET_QEMU_ARM_xxBIT to select a few different Kconfig symbols, provide the ARMv8 memory map from the board file and add a new defconfig based on the 32-bit defconfig. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-01-19arm: mach-omap2: Remove secure certificate name printingAndrew F. Davis
The signing certificate name is always 15 chars long, but need not be null terminated. One solution is then to use printf precision modifiers to only print this many chars ("%.15s"), but tiny printf does not support this, so lets just drop printing the cert name for now. Signed-off-by: Andrew F. Davis <afd@ti.com>
2018-01-19arm: am33xx: security: Fix size calculation on headerMadan Srinivas
Fix the size calculation in the verify boot. The header size should be subtracted from the image size, not be assigned to the image size. Fixes: 0830d72bb9f8 ("arm: am33xx: security: adds auth support for encrypted images") Signed-off-by: Madan Srinivas <madans@ti.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19rpi_0_w: Add configs consistent with RpI3Drew Moseley
CONFIG_OF_EMBED in particular is needed to allow the Raspberry Pi firmware to pass the DTB to U-Boot and on to the kernel. Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
2018-01-19ARM: omap3: evm: Add kernel image loading from UBIFS and EXT4Derald D. Woods
This commit adds UBIFS_NAND to BOOT_TARGET_DEVICES. This will allow the kernel zImage to be loaded from '/boot/zImage' in UBIFS (ubi0:rootfs). Additionally update the *_MMC devices to also load kernel image from the MMC 0:2 EXT4 file system. DISTRO_DEFAULTS Setup ===================== [primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot [fallback 1] Check MMC 0:2 /boot/zImage and run mmcbootz [fallback 2] Check MMC 0:2 /boot/uImage and run mmcboot [fallback 3] Check NAND UBIFS /boot/zImage and run nandbootubifs [fallback 4] Check NAND partitions and run nandboot The following "extlinux.conf" can be used to load images in the top-level of the MMC 0:1 FAT partition. [MMC(0:1)/extlinux/extlinux.conf] ---8<------------------------------------------------------------------- default omap3-evm label omap3-evm kernel /zImage fdt /omap3-evm.dtb append console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait ---8<------------------------------------------------------------------- Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-19board_r: remove superfluous #ifdef CONFIG_PRAMHeinrich Schuchardt
initr_mem() is already enclosed by #if defined(CONFIG_PRAM) #endif So there is no need to check CONFIG_PRAM again inside the function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19GPIO: tca642x: Rework to not include commands in SPLTom Rini
The command portion of the GPIO driver can only be used in full SPL so re-work to guard the command related portions and mark it as static. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-19GPIO: pca953x: Rework to not include commands in SPLTom Rini
The command portion of the GPIO driver can only be used in full SPL so re-work to guard the command related portions and mark it as static. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19cmd: pmic: update help descriptionKlaus Goger
Change help description to match the style of the other U-Boot commands and get rid of the leading whitespace. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-01-19fs/fat: remove distractive message in file_fat_read_at()Heinrich Schuchardt
The message "reading %s\n" may be interesting when debugging but otherwise it is superfluous. Only output the message when debugging. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19fs: remove distractive message in fs_read()Heinrich Schuchardt
The message "** %s shorter than offset + len **\n" may be interesting when debugging but it does not indicate an error. So we should not write it if we are not in debug mode. Fixes: 7a3e70cfd88c fs/fs.c: read up to EOF when len would read past EOF Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-01-19DA850evm: Remove dead codeAdam Ford
There is an #ifdef and #endif with nothing in between. This patch simply removes this dead/useless code. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-19ARM: dts: omap3-beagle{-xm}: Enable DM and devicetree for BeagleBoardDerald D. Woods
This commit updates the configuration files needed to support OF_CONTROL on the OMAP3 BeagleBoard(s).
2018-01-19ARM: dts: omap3-beagle{-xm}: Add support for BeagleBoardDerald D. Woods
This commit adds OMAP3 BeagleBoard devicetree files from Linux v4.15-rc5. This includes standard OMAP34XX board revisions as well as the 'xM' which is OMAP36XX. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-19env: ti: Select dtb name for dra76x and am574Lokesh Vutla
Select dtb name for am574x-idk and dra76x evm with acd package. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19ARM: dts: am574x-idk: Add initial supportLokesh Vutla
Add initial dts support for am574x-idk Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: am57xx: Enable CMD_DDR3Lokesh Vutla
Enable CMD_DDR3 on all am57xx based platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: am574x-idk: Update pinmux using latest PMTLokesh Vutla
Update the board pinmux for AM574x-IDK board using latest PMT[1] and the board files named am574x_idk_v1p3b_sr2p0 that were auto generated on 13th October, 2017 by "Ahmad Rashed <a-rashed@ti.com>". Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: am574x-idk: Add ddr data supportLokesh Vutla
AM574x-idk has the following DDR parts attached: EMIF1: MT41K256M16HA (1GB with ECC) EMIF2: MT41K256M16HA (1GB without ECC) Enabling 2GB DDR without interleaving between EMIFs. And enabling ECC on EMIF1. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Krunal Bhargav <k-bhargav@ti.com>
2018-01-19board: ti: am574x-idk: Add hw data supportLokesh Vutla
Update prcm, voltages and pinmux support for am574x-idk. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19board: ti: am574x-idk: Add epprom supportLokesh Vutla
am574x-idk is a board based on TI's am574 processor Add eeprom support. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19arm: dra762: Add support for device package identificationLokesh Vutla
DRA762 comes in two packages: - ABZ: Pin compatible package with DRA742 with DDR@1333MHz - ACD: High performance(OPP_PLUS) package with new IPs Both the above packages uses the same IDCODE hence needs to differentiate using package information in DIE_ID_2. Add support for the same. Also update clock, ddr, emif information. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19cmd: ti: Generalize cmd_ddr3 commandLokesh Vutla
Keystone and DRA7 based TI platforms uses same EMIF memory controller. cmd_ddr3 command is customized for keystone platforms, make it generic so that it can be re used for DRA7 platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-01-19arm: keystone: Move cmd_ddr3 to a common placeLokesh Vutla
Move cmd_ddr3 to cmd/ti in order to make it build for non-keystone TI platforms. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Rename to ddr3.c not cmd_ddr3.c] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2025-01-11 08:54:14 +0000