summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-24ARM: socfpga: Pull PL310 clearing into common codeMarek Vasut
Pull the PL310 clearing code into common code, so it can be reused by Arria10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
2019-05-24gpio: dwapb_gpio: fix broken dev->nodeSimon Goldschmidt
commit 1b898ffc040b ("gpio: dwapb_gpio: convert to livetree") introduced a bug in that dev->node of the gpio chip was accidentally set to the of_node of its bank subnode. What it meant to do was assign subdev->node, not dev->node. While this doesn't affect too many use cases, iterating over the gpio chip's properties doesn't work any more after that, so fix this. Fixes: commit 1b898ffc040b ("gpio: dwapb_gpio: convert to livetree") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-05-23configs: enable sata, eSDHC, USB device module in T2080QDSPeng Ma
Enable eSDHC, SATA and USB DM for T2080QDS in uboot Signed-off-by: Peng Ma <peng.ma@nxp.com> Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.Peng Ma
Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23arch: powerpc: add sata node for t2080 dtsPeng Ma
Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23ata: fsl_ahci: Add sata DM support for Freescale powerpc socsPeng Ma
This patch is to support Freescale sata driver with dts initialized. Also resolved the following problems. ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23usb: ehci: adopt 32 bit address for CONFIG_PPCYinbo Zhu
adopt 32 bit addr in fsl_esdhc for CONFIG_PPC. So adopt 32 bit address for CONFIG_PPC. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23arch: powerpc: add usb node in t2080 dtsYinbo Zhu
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23configs: T2080QDS: enable device tree support for pcieboot & secure bootYinbo Zhu
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23stm32mp1: ram: add tuning in DDR interactive modePatrick Delaunay
Add command tuning for DDR interactive mode, used during board bring-up or with CubeMX DDR tools to execute software tuning for the DDR configuration: - software read DQS Gating (replace the built-in one) - Bit de-skew - Eye Training or DQS training Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: add tests in DDR interactive modePatrick Delaunay
Add command tests for DDR interactive mode, used during board bring-up or with CubeMX DDR tools to verify the DDR configuration. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: add interactive mode for DDR configurationPatrick Delaunay
This debug mode is used by CubeMX DDR tuning tools or manualy for tests during board bring-up. It is simple console used to change DDR parameters and check initialization. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: add support for LPDDR2/LPDDR3Patrick Delaunay
Manage power supply configuration for board using stpmic1 with LPDDR2 or with LPDDR3: + VDD_DDR1 = 1.8V with BUCK3 (bypass if possible) + VDD_DDR2 = 1.2V with BUCK2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: update parameter array initializationPatrick Delaunay
Force alignment of the size of parameters array with the expected value in the binding, that allows compilation error when the array size change. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23ARM: dts: stm32mp1: DDR config v1.44Patrick Delaunay
Update DDR configuration with the latest update: - PUBL_regs: DXnGCR[0]= according to ddr_width to disable Byte lane 2/3 in 16bit - fix LPDDR2/3 timing_calc to step RL/WL in relaxed timings mode - remove LPDDR3 RL3 (optional) support vs MR0[7] because MR0[7] can't be read instead always apply worse RL/WL for LPDDR3 when freq < 166MHz) - change MR3 to 48ohm drive for LPDDR2/3 - change default ZPROG[7:4] = 0x1 for LPDDR2/3 , '0' is not allowed even when ODT not used - use DQSTRN for LPDDR2/3 (it was not set in PIR) - LPDDR3: set dqsge/dwsgx gate extension to 2,2 like LPDDR2 -DDRCTRL.dfitmg0: + for LPDDR3 tphy_wrlat = WL (as LPDDR2) + improvement for relaxed mode vs RL/Wl at corner case. For example @533MHz RL/WL (relaxed) = 9/5 for LPDDR2/3 and correction to MR2 accordingly - DDR_PCFGQOS1_1: port1 timeout relaxed from 0x00 to 0x40, for LTDC. - DDR_PCFGWQOS0_0: change vpr level from 11 to 12 in order to include the CPU on the variable priority queue. - DDR_SCHED: fix to consider 13 levels (13 levels - 1 = 0xC) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: change ddr speed to kHzPatrick Delaunay
Allow fractional support in DDR tools. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: increase the delay after reset to 128 cyclesPatrick Delaunay
Component Notification DDR controller errata (3.00a):9001313030 Synchronization Time Waited After De-assertion of presetn is 128 pclk Cycles. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: ram: update mask for operating modePatrick Delaunay
Regression introduced by rebase, when loop was replaced by readl_poll_timeout() function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23serial: stm32: remove watchog reset in debug putcPatrick Delaunay
For STM32MP, the watchdog is based on DM and the function watchod_reset call the function uclass_get_device(UCLASS_WDT) to found the driver associated IWDG2. As this reset is not mandatory in debug putc (the uart fifo will be empty after some us), we can simplify the code by removing this call. And this patch avoid issue when putc is called before initialization of DM core, before the parsing of the device tree parsing and each node bound to driver; that also avoid memory leak. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23serial: stm32: remove unnecessary tracePatrick Delaunay
Remove the trace indicating the end of the DEBUG initialization Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23env: solve compilation error in SPLPatrick Delaunay
Solve compilation issue when cli_simple.o is used in SPL and CONFIG_SPL_ENV_SUPPORT is not defined. env/built-in.o:(.data.env_htab+0xc): undefined reference to `env_flags_validate' u-boot/scripts/Makefile.spl:384: recipe for target 'spl/u-boot-spl' failed make[2]: *** [spl/u-boot-spl] Error 1 u-boot/Makefile:1649: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 2 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23clk: stm32mp1: add set_rate for DDRPHYC clockPatrick Delaunay
Add the DDRPHYC support for clk_set_rate, used in DDR interactive mode Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: add bootstage supportPatrick Delaunay
Add the needed configurations for bootstage and activate bootstage command. BOOTSTAGE_REPORT is not activated by default. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23armv7: timer: init timer with bootstagePatrick Delaunay
In initf_bootstage() we call bootstage_mark_name() which ends up calling timer_get_us() before timer_init(); that cause crash for stm32mp1. This patch solve the issue without changing the initialization sequence. See also commit 97d20f69f53e ("Enable CONFIG_TIMER_EARLY with bootstage") for other solution when DM is activated for TIMER. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: add bootcount supportPatrick Delaunay
Activate bootcount and use TAMP register to store the count value. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23mkimage: change stm32image header to manage binary informationPatrick Delaunay
To get more information from STM32 Header about the generated binary, we will add a new byte with the following field: replace padding byte 255 with 0x00 for "U-Boot" Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23i2c: stm32f7: improve loopback in timing algorithmNicolas Le Bayon
This avoids useless loops inside the I2C timing algorithm. Actually, we support only one possible solution per prescaler value. So after finding a solution with a prescaler, the algorithm can switch directly to the next prescaler value. Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23i2c: stm32f7: Fix SDADEL minimum formulaNicolas Le Bayon
It conforms with Reference Manual I2C timing section. Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: update RCC binding after kernel realignmentPatrick Delaunay
RCC is no more a mfd and add a complete example and alignment with latest TF-A binding Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: psci: add synchronization with ROM codePatrick Delaunay
Use SGI0 interruption and TAMP_BACKUP_MAGIC_NUMBER to synchronize the core1 boot sequence requested by core0 in psci_cpu_on(): - a initial interruption is needed in ROM code after RCC_MP_GRSTCSETR_MPUP1RST (psci_cpu_off) - the ROM code set to 0 the 2 registers + TAMP_BACKUP_BRANCH_ADDRESS + TAMP_BACKUP_MAGIC_NUMBER when magic is not egual to BOOT_API_A7_CORE0_MAGIC_NUMBER This patch solve issue for cpu1 restart in kernel. echo 0 > /sys/devices/system/cpu/cpu1/online echo 1 > /sys/devices/system/cpu/cpu1/online Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: cosmetic: bsec: reorder include filesPatrick Delaunay
Reorder the include files in alphabetic order. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: migrate PREBOOT to KconfigPatrick Delaunay
Use Kconfig to activate CONFIG_PREBOOT (empty by default). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: Move ENV_SIZE and ENV_OFFSET to KconfigPatrick Delaunay
Add arch stm32mp for ENV migration step and drop more items from include/configs/xxx.h. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23stm32mp1: Move config SYS_MALLOC_LEN to KconfigPatrick Delaunay
This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-05-23driver: mmc: adopt 32 bit addr in fsl_esdhc for CONFIG_PPCYinbo Zhu
PowerPC supports 32 bit address. So adopt 32 bit addr in fsl_esdhc for CONFIG_PPC. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23driver: mmc: set sdhc clock in fsl_esdhc for CONFIG_PPCYinbo Zhu
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-23arch: powerpc: add eSDHC node to t2080qds dtsYinbo Zhu
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22Merge tag 'dm-pull-22may19' of git://git.denx.de/u-boot-dmTom Rini
Various DM fixes Addition of ofnode_get_addr_size_index()
2019-05-22Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
Changes from rc2 tag - Support PCIe Gen4 driver of the Mobiveil IP - NXP LS1028A SoC and platform support - Few SPI related config updates - Distinguish the ecc val by chassis version and move the ecc addr to dts - sp805 watchdog support
2019-05-22armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.hAndy Shevchenko
commit 58c3e62040be ("armv8: lx2160ardb : Add support for LX2160ARDB platform") brought a new boards support with redundancy in the config.h. One of them is CONFIG_CMDLINE_EDITING which is removed by this change. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Peng Ma <peng.ma@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22config: enable SP805 watchdog support for LS1028AQiang Zhao
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22arm: dts: fsl-ls1028a: add sp805 watchdog nodeQiang Zhao
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22driver: watchdog: add sp805 watchdog supportQiang Zhao
sp805 is watchdog on some NXP layerscape SoCs, adding it's driver. Configs CONFIG_WDT_SP805, CONFIG_WDT, CONFIG_CMD_WDT needs to be enabled to use it. Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22configs: Unset CONFIG_SPI_BAR for all LS2080A/LS2081A defconfigsRajat Srivastava
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigsRajat Srivastava
Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22configs: Unset CONFIG_SPI_BAR for all LS1088A defconfigsAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22armv8: fsl-layerscape: Set env_loc to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.Udit Agarwal
ENVL_NOWHERE is dependent on CONFIG_ENV_IS_NOWHERE and not on CONFIG_CHAIN_OF_TRUST so return ENVL_NOWHERE when CONFIG_ENV_IS_NOWHERE is enabled Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22armv8: Secure Boot: Modify boot_a_script definitionVinitha V Pillai
esbc_validate command will not be executed if “load” command for its header fails and will further execute the source command for bootscript, without its validation and boot process continues. To halt the boot process in case secure boot header is not loaded successfully, esbc_validate command is invoked separately after “load” command. The secure boot validation of the bootscript header will fail (if header is not loaded) and halts the boot process, which prevent source command from execution. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22board: fsl: lx2160ardb: invert AQR107 pins polarityFlorin Chiculita
AQR107 PHYs interrupt pins are active-low, while the GIC expects a level-high signal. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22scsi: ceva: Clean up the driver codePeng Ma
Distinguish the ecc val by chassis version and move the ecc addr to dts. Add ls1028a soc support. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-07 20:26:17 +0000