summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-17ata: sort ATA commandsHeinrich Schuchardt
Sort the ATA commands in include/libata.h by number. Add a few more comments. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-17include/ata.h: remove invalid linksHeinrich Schuchardt
Remove invalid URLs for "Information Technology - AT Attachment-3 Interface (ATA-3)", point to ANSI X3.298-1997. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-17Kconfig: fix typos in CMD_BEDBUG descriptionHeinrich Schuchardt
Fix documentation bug reported by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-17doc: fix references to driver-modelHeinrich Schuchardt
Fix some errors pointed out by 'make refcheckdocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17README: replace reference to boards.cfgHeinrich Schuchardt
boards.cfg is not delivered with the U-Boot source. So it is preferable to look at configs/*_defconfig to identify available deconfigs. Fix a typo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17image: Add compressed Image parsing support in booti.Atish Patra
Add compressed Image parsing support so that booti can parse both flat and compressed Image to boot Linux. Currently, it is difficult to calculate a safe address for every board where the compressed image can be decompressed. It is also not possible to figure out the size of the compressed file as well. Thus, user need to set two additional environment variables kernel_comp_addr_r and filesize to make this work. Following compression methods are supported for now. lzma, lzo, bzip2, gzip. lz4 support is not added as ARM64 kernel generates a lz4 compressed image with legacy header which U-Boot doesn't know how to parse and decompress. Tested on HiFive Unleashed and Qemu for RISC-V. Tested on Qemu for ARM64. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix minor rST formatting problems] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17image: Add a common compression type detection function.Atish Patra
Currently, there is no method that can detect compression types given a file. This is very useful where a compressed kernel image is loaded directly to the memory. Inspect initial few bytes to figure out compression type of the image. It will be used in booti method for now but can be reused any other function in future as well. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-17lib: kconfig: Add option to set BZIP2 compression methodAtish Patra
There is no way to select BZIP2 compression method. Add it under library/compression config where all other compression related configs are present. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-17cmd: mem: Add bitflip memory test to alternate mtestStefan Roese
This additional bitflip memory test is inspired by the bitflip test in memtester v4.3.0. It show some errors on some problematic GARDENA MT7688 based boards. The other memory tests usually don't show any errors here. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17cmd: mem: Use IS_ENABLED instead of alt_test variableStefan Roese
This patch uses the IS_ENABLED() macro to check, which mtest variant is enabled. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17cmd: mem: Drop eldk-4.2 workaround and use cast in unmap_sysmem()Stefan Roese
Use a cast instead of the "eldk-4.2" workaround for unmap_sysmem(). Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17cmd: mem: Correctly count the errors in mtestStefan Roese
This patch changes mtest to correctly count the overall errors and print them even in the abort (Ctrl-C) case. Signed-off-by: Stefan Roese <sr@denx.de>
2020-04-17tee: optee: use dev_info in print_os_revisionPatrick Delaunay
Display TEE version at information level; this patch replaces debug() call to dev_info() in print_os_revision() function. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
2020-04-17doc: spl: update reference to driver-model/README.txtPatrick Delaunay
Update the reference in doc/README.SPL to a no more existing file: "driver-model/README.txt", it is changed to "doc/driver-model/design.rst". Adding the directory path /doc/ allows to check this reference with 'make refcheckdocs'. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17scripts: add documentation-file-ref-checkHeinrich Schuchardt
'make refcheckdocs' requires scripts/documentation-file-ref-check. Adopt script from Linux v5.6-rc3. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-17mkimage: fit: don't create image with 0700 permissionsThomas Hebb
commit 7298e422504e ("mkimage: fit: add support to encrypt image with aes") added a new copyfile() function as part of the FIT image creation flow. This function as currently written creates the final image with a mode of 0700 (before umask), differing from the old behavior of 0666. Since there doesn't seem to be any reason to make the image executable or non-group, non-other readable, change the mask to 0666 to preserve the old behavior. Fixes: 7298e422504e ("mkimage: fit: add support to encrypt image with aes") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2020-04-17ide: remove duplicate defines form include/ata.hHeinrich Schuchardt
ATA commands are already defined in include/libata.h. There is no need to duplicate them in include/ata.h. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17block: ide: use definitions from include/libata.hHeinrich Schuchardt
Currently ATA commands are defined both in include/libata.h and include/ata.h. Use the command definitions from include/libata.h where applicable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17cmd: fat: remove unused includesHeinrich Schuchardt
Remove unused includes from cmd/fat.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-17arm: dts: add pwm support for MediaTek SoCsSam Shih
This patch add pwm support for mt7622, mt7623 and mt7629 SoCs Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-04-17mediatek: pwm: add pwm driver for MediaTek SoCsSam Shih
This driver support the standard PWM API for MediaTek MT7623, MT7622 and MT7629 SoCs Signed-off-by: Sam Shih <sam.shih@mediatek.com>
2020-04-17cmd: Add unlz4 commandYusuke Ashiduka
This command is a new command called "unlz4" that decompresses from memory into memory. Used with the CONFIG_CMD_UNLZ4 optionenabled. Signed-off-by: Yusuke Ashiduka <ashiduka@fujitsu.com> [trini: Use %zd / %zX not %ld / %lX in printf] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-17env: make file-scope env_ptr variables staticRasmus Villemoes
The combination ENV_IS_IN_NVRAM=y, ENV_IS_IN_REMOTE=y fails to build: env/remote.o:/mnt/ext4/devel/u-boot/env/remote.c:17: multiple definition of `env_ptr' env/nvram.o:/mnt/ext4/devel/u-boot/env/nvram.c:41: first defined here It's not necessarily a meaningful combination, but for build-testing it's nice to be able to enable most ENV_IS_IN_* at the same time, and since these env_ptr are not declared anywhere, they really have no reason to have external linkage. nand.c and flash.c similarly already define file-scope static env_ptr variables. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-04-17ARM: bootm: take into account gd->ram_topPatrice Chotard
If gd->ram_top has been tuned using board_get_usable_ram_top(), it must be taken into account when reserving arch lmb. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick DELAUNAY <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-17Merge branch '2020-04-16-master-imports'Tom Rini
- DM GPIO improvements - BTRFS fixes - Corrections around gd->new_bootstage alignment - Start documentation improvements to support 'make refcheckdocs'
2020-04-16board_f.c: Ensure 16 alignment of start_addr_sp and reserved memoryPatrick Delaunay
Add a function reserve_stack_aligned() to reserved memory with 16 bits alignment after the stack pointer (gd->start_addr_sp) and use this new function in board_f.c to reserve all the memory area (malloc, board, gd, fdt, bootstage, stacks). This 16 byte alignment is needed for cast on struct pointer for the reserved memory, for example: + x86_64 ABI: https://reviews.llvm.org/D30049: 16 bytes + ARMv8 Instruction Set Overview: quad word, 16 bytes An other alignment value could be needed for other architecture. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2020-04-16arm: set the relocated gd with gd->new_gdPatrick Delaunay
Simplify the arm relocation behavior and get gd directly form new_gd, as it is already done in crt0_64.S: ldr x18, [x18, #GD_NEW_GD] /* x18 <- gd->new_gd */ This patch avoid assumption on new GD location (new GD is below bd - with #GD_SIZE offset). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16Revert "stm32mp1: remove the imply BOOTSTAGE"Patrick Delaunay
This reverts the workaround introduced by the commit 16fec9b0bc1a ("stm32mp1: remove the imply BOOTSTAGE") As the bootstage alignment issue is now solved. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16board_f.c: Ensure gd->new_bootstage alignmentPatrice Chotard
In reserve_bootstage(), in case size is odd, gd->new_bootstage is not aligned. In bootstage_relocate(), the platform hangs when getting access to data->record[i].name. To avoid this issue, make gd->new_bootstage 16 byte aligned. To ensure that new_bootstage is 16 byte aligned (at least needed for x86_64 and ARMv8) and new_bootstage starts down to get enough space, ALIGN_DOWN macro is used. Fixes: ac9cd4805c8b ("bootstage: Correct relocation algorithm") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas MANOCHA <vikas.manocha@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16arm: imx: update reference to README.mxc_habPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/README.mxc_hab => doc/imx/habv4/* Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: device-tree-bindings: update reference to binding directoryPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/devicetree/device-tree-bindings/ => doc/device-tree-bindings/ Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.boardPatrick Delaunay
Update reference in files detected by scripts/documentation-file-ref-check doc/README.<board> => board/<board>/README Files moved in board directory in commit 702e6014f15b ("doc: cleanup - move board READMEs into respective board directories")' Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.imx8imagePatrick Delaunay
Update reference in many files detected by scripts/documentation-file-ref-check README.imx8image => imx/mkimage/imx8image.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16doc: update reference to README.imximagePatrick Delaunay
Update reference in many files detected by scripts/documentation-file-ref-check README.imximage => imx/mkimage/imximage.txt Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16Kconfig: update reference to README.x86Patrick Delaunay
Update reference in Kconfig detected by scripts/documentation-file-ref-check README.x86 => doc/arch/x86.rst Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16README: update reference to *.READMEPatrick Delaunay
Update some reference in README file detected by scripts/documentation-file-ref-check *.README => README.* Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-04-16test: pinmux: add pincontrol-gpio for pin configurationPatrick Delaunay
Add a simple pincontrol associated to the sandbox gpio driver, that allows to check pin configuration with the command pinmux. The pinmux test is also updated to test behavior with 2 pincontrols. Example to check LED pin configuration: => pinmux list | Device | Driver | Parent | pinctrl-gpio | sandbox_pinctrl_gpio | root_driver | pinctrl | sandbox_pinctrl | root_driver => pinmux dev pinctrl-gpio => pinmux status a0 : gpio input . a1 : gpio input . a2 : gpio input . a3 : gpio input . a4 : gpio input . a5 : gpio output . a6 : gpio output . ... Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16test: dm: update test for pins configuration in gpioPatrick Delaunay
Add tests for new API set_dir_flags and set_dir_flags and associated code in gpio uclass. Test support for new flags GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE GPIO_PULL_UP and GPIO_PULL_DOWN. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-04-16gpio: sandbox: cleanup binding supportPatrick Delaunay
Cleanup binding support, use the generic binding by default (test u-class gpio_xlate_offs_flags function) and add specific binding for added value. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16test: dm: update test for pins configuration in pinctrl nodePatrick Delaunay
Add test for "pins" configuration in gpio uclass with set_state() ops and test for generic parsing of pinconf_param array). set_state() is called by: - pinctrl_generic_set_state |- pinctrl_generic_set_state_subnode Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16pinctrl: sandbox: Add mux information in get_pin_muxingPatrick Delaunay
Add param information in pin information output. This update prepare unitary test for pin configuration in pinctrl node. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16dt-bindings: gpio: alignment with kernel v5.3Patrick Delaunay
Update the binding file for gpio, it is just an alignment with kernel v5.3. The U-Boot code example for gpio-hog (not directly linked to binding) is moved in a new file doc/README.gpio. [commit 21676b706e99 ("gpio: fixes for gpio-hog support") & 'commit 4762a9988ede ("gpio: add gpio-hog support")'] Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add ops to set dir flagsPatrick Delaunay
Add the ops for GPIO driver set_dir_flags() to set the dir flags. The user can update the direction and configuration of each GPIO with a only call to dm_gpio_set_dir_flags() or dm_gpio_set_dir() and respecting the configuration provided by device tree (saved in desc->flags). When these optional ops are absent, the gpio uclass use the mandatory ops (direction_output, direction_input, get_value) and desc->flags to manage only the main dir flags: - GPIOD_IS_IN - GPIOD_IS_OUT - GPIOD_IS_OUT_ACTIVE - GPIOD_ACTIVE_LOW Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add ops to get dir flagsPatrick Delaunay
Add the ops for GPIO driver get_dir_flags(), allows to get dynamically the current gpio configuration; it is used by the API function dm_gpio_get_dir_flags(). When these optional ops are absent, the gpio uclass continues to use the mandatory ops (direction_output, direction_input, get_value) and value of desc->flags to manage only the main dir flags: - GPIOD_IS_IN - GPIOD_IS_OUT - GPIOD_IS_OUT_ACTIVE - GPIOD_ACTIVE_LOW Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add support of new GPIO direction flagPatrick Delaunay
This commit manages the new dir flags that can be used in gpio specifiers to indicate the pull-up or pull-down resistor configuration for output gpio (GPIO_PULL_UP, GPIO_PULL_DOWN) or the Open Drain/Open Source configuration for input gpio (GPIO_OPEN_DRAIN, GPIO_OPEN_SOURCE). These flags are already supported in Linux kernel in gpio lib. This patch only parse and save the direction flags in GPIO descriptor (desc->flags), it prepares the introduction of new ops to manage them. The GPIO uclass supports new GPIO flags from device-tree (GPIO_XXX define in include/dt-bindings/gpio/gpio.h) and translate them in the dir flags (GPIOD_XXX): - GPIO_PULL_UP => GPIOD_PULL_UP - GPIO_PULL_DOWN => GPIOD_PULL_DOWN - GPIO_OPEN_DRAIN => GPIOD_OPEN_DRAIN - GPIO_OPEN_SOURCE => GPIOD_OPEN_SOURCE This patch also adds protection in the check_dir_flags function for new invalid configuration of the dir flags. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: update dir_flags managementPatrick Delaunay
Update the flag management in GPIO uclass: the desc->flags is always combined with the requested flags and the GPIO descriptor is updated for further call. Add a function dm_gpio_get_dir_flags to get dynamically the current dir_flags (configuration and value). This patch prepare introduction of the dir flags support with new ops. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add helper GPIOD_FLAGS_OUTPUTPatrick Delaunay
Add a macro to provide the GPIO output value according the dir flags content. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add function check_dir_flagsPatrick Delaunay
Add a dir flags validity check with a new function check_dir_flags. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add function _dm_gpio_set_dir_flagsPatrick Delaunay
Introduce the function _dm_gpio_set_dir_flags to set dir flags without check if the GPIO is reserved. Separate the reserved check for "set_dir" and "set_dir_flags". This patch is a preliminary step to add new ops. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16gpio: add function _gpio_get_valuePatrick Delaunay
Introduce the function _gpio_get_value to get the GPIO value without check if it is reserved. This patch prepare new ops introduction. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2025-02-05 07:18:23 +0000