summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-12mx6cuboxi: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12wandboard: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12cgtqmx6eval: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12mx6sabresd: Avoid calling setup_display() from SPL codeFabio Estevam
There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
2017-10-12efi_loader: console support for color attributesRob Clark
Shell.efi uses this, and supporting color attributes makes things look nicer. Map the EFI fg/bg color attributes to ANSI escape sequences. Not all colors have a perfect match, but spec just says "Devices supporting a different number of text colors are required to emulate the above colors to the best of the device’s capabilities". Signed-off-by: Rob Clark <robdclark@gmail.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Alexander Graf <agraf@suse.de> [agraf: s/unsigned/unsigned int/] Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-12efi_loader: Add mem-mapped for fallbackRob Clark
When we don't have a real device/image path, such as 'bootefi hello', construct a mem-mapped device-path. This fixes 'bootefi hello' after devicepath refactoring. Fixes: 95c5553ea2 ("efi_loader: refactor boot device and loaded_image handling") Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-11Merge git://git.denx.de/u-boot-i2cTom Rini
2017-10-11i2c: muxes: pca954x: look up width from chip_descChris Packham
Commit 8e6eda7cda6c ("drivers/i2c/muxes/pca954x: Add pca9547 I2C mux support") introduced a chip_desc for the pca954x devices but failed to update pca954x_ofdata_to_platdata() to be aware of it. Make pca954x_ofdata_to_platdata() lookup the chip_desc to validate the device width. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Marek Behun <marek.behun@nic.cz>
2017-10-10Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini
2017-10-10configs: Re-sync CONFIG_CMD_IMLS with moveconfigTuomas Tynkkynen
The option is specified in Kconfig, but still a few config header files are overriding the choice by #undef'ing it. Re-sync the option with moveconfig to rid of the #undefs. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10cmd: Toggle the default value of CONFIG_CMD_IMLSTuomas Tynkkynen
Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-10efi_loader: don't increment part twice per loopJonathan Gray
Correct a mistake in the part number handling of commit 16a73b249d138fedeb188710533902ed7aac1ddc and only increment part once per loop. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-10efi_loader: MAX_UTF8_PER_UTF16 = 3Heinrich Schuchardt
The constant MAX_UTF8_PER_UTF16 is used to calculate required memory when converting from UTF-16 to UTF-8. If this constant is too big we waste memory. A code point encoded by one UTF-16 symbol is converted to a maximum of three UTF-8 symbols, e.g. 0xffff could be encoded as 0xef 0xbf 0xbf. The first byte carries four bits, the second and third byte carry six bits each. A code point encoded by two UTF-16 symbols is converted to four UTF-8 symbols. So in this case we need a maximum of two UTF-8 symbols per UTF-16 symbol. As the overall maximum is three UTF-8 symobls per UTF-16 symbol we need MAX_UTF8_PER_UTF16 = 3. Fixes: 78178bb0c9d lib: add some utf16 handling helpers Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-10efi_loader: search all possible disk partitionsJonathan Gray
When searching for partitions don't stop if a partition is not present for a given partition number as there may be valid partitions after. Search for up to MAX_SEARCH_PARTITIONS matching the other callers of part_get_info(). This allows OpenBSD to boot via the efi_loader on rpi_3 again after changes made after U-Boot 2017.09. With MBR partitioning OpenBSD will by default use the fourth partition for the 0xA6 (OpenBSD) partition. Signed-off-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09Merge git://git.denx.de/u-boot-dmTom Rini
2017-10-10ARM: rmobile: dts: Add SDR104/HS200 to Salvator-XMarek Vasut
Add DT nodes to enable SDR104/HS200 modes on Salvator-X boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-10ARM: rmobile: Fixup ULCB CPLD support after PFC reworkMarek Vasut
The ULCB CPLD support was not updated during the PFC table rework, fix up the GPIO numbers until the CPLD support is rewritten to a proper DM capable and DT probing driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2017-10-09Merge git://git.denx.de/u-boot-videoTom Rini
2017-10-09armv8: ls1043ardb_sdcard: prepare falcon bootYork Sun
Due to a conflict with recent Primary Protected Application (PPA), PPA cannot be loaded for SPL stage, falcon boot is not enabled by default. With compatible PPA image, to enable falcon boot, activate these Kconfig options in defconfig CONFIG_SPL_FIT=y CONFIG_SPL_FSL_LS_PPA=y CONFIG_SPL_GZIP=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_OF_LIBFDT=y Because environment variables are not avaiable during SPL stage for SD boot, set "boot_os=y" as default. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09armv8: ls1043ardb: Enable spl_board_init() functionYork Sun
CONFIG_SPL_BOARD_INIT is used for SPL boot. Enable it in defconfig for LS1043ARDB SPL targets. Signed-off-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: layerscape: Enable falcon bootYork Sun
Add jump_to_image_linux() for arm64. Add "noreturn" flag to armv8_switch_to_el2(). Add hooks to fsl-layerscape to enable falcon boot. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Łukasz Majewski <lukma@denx.de> Tested-by: Łukasz Majewski <lukma@denx.de>
2017-10-09armv8: ls1043ardb: Use static DDR setting for SPL bootYork Sun
This board has soldered DDR chips. To reduce the SPL image size, use static DDR setting instead of dynamic DDR driver. Signed-off-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: fsl-layerscape: Avoid running dram_init_banksize againYork Sun
gd->ram_size is reduced in this function to reserve secure memory. Avoid running this function again to further reduce memory size. This fixes issue for SPL boot with PPA image loaded in which case secure memory is incorrectly allocated due to repeated calling. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09cmd: spl: fix compiling error when CONFIG_CMD_SPL_WRITE_SIZE not definedYork Sun
CONFIG_CMD_SPL_WRITE_SIZE is used for writing parameters to non-volatile storage. So far it is only used for NAND. Fix compiling error when this macro is not used for SD. Signed-off-by: York Sun <york.sun@nxp.com> CC: Anatolij Gustschin <agust@denx.de>
2017-10-09spl: fix assignment of board info to global dataYork Sun
Commit 15eb1d43bf47 ("spl: reorder the assignment of board info to global data") intended to move assignment of board info earlier, into board_init_r(). However, function preload_console_init() is called either from spl_board_init() or from board_init_f(). For the latter case, the board info assignment is much earlier than proposed board_init_r(). Create a new function to fill gd->bd and call this function when needed. Signed-off-by: York Sun <york.sun@nxp.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Ravi Babu <ravibabu@ti.com> CC: Lukasz Majewski <lukma@denx.de> CC: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-10-09armv8: ls1088a: Update MC boot sequenceBogdan Purcareata
The MC boot sequence is contained in mc_env_boot. Update LS1088A boards to use this function, and hook it to reset_phy so that it's called late enough, after the ports have been initialized, for proper DPC / DPL fixup. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: fsl-layerscape: Allocate Secure memory from first ddr regionSumit Garg
This change is required due to trusted OS (OP-TEE) not being position independent code, it requires compile time fixed base address. To take care of this it is assumed that all layerscape armv8 platforms has minimum 2G ddr in first region. So we can have fixed address space (66 MB -> (2MB for PPA + 64MB for trusted OS)) allocated from top of first 2G ddr region and compile trusted OS with this fixed base address. But one exception here is ls1012 where we have only 1G (rdb) or 512M (frdm) ddr memory. For those we can have different fixed compile time base addresses for trusted OS. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09armv7: ls1021aiot: Move CONFIG_CMD_BOOTZ to KconfigFabio Estevam
CONFIG_CMD_BOOTZ symbol does not work in board config file anymore, so fix this by moving it to Kconfig. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: Apply workaround for USB erratum A-009007 to LS1088ARan Wang
Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: ls1046aqds: Fix NAND offset for Fman ucode and envGong Qianyu
Fix a bug of 'commit 8104deb2d6b7 ("armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046A")' as NAND block size is 256KB on LS1046AQDS. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09efi_selftest: error handling in SNP testHeinrich Schuchardt
Avoid NULL pointer dereference after setup failed due to a missing network. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: comments for functions add missing @returnHeinrich Schuchardt
For some functions the @return description is missing. Fix typo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: Fix disk dp's for pre-DM/legacy devicesRob Clark
This fixes an issue with OpenBSD's bootloader, and I think should also fix a similar issue with grub2 on legacy devices. In the legacy case we were creating disk objects for the partitions, but not also the parent device. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: avoid NULL dereference in efi_dp_matchHeinrich Schuchardt
When calling bootefi hello twice a kernel dump occurs. Neither bootefi hello nor bootefi selftest have an image device patch. So do not try to dereference the NULL value. Fixes: 95c5553ea26 efi_loader: refactor boot device and loaded_image handling Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_selftest: avoid dereferencing NULL in tpl testHeinrich Schuchardt
The task priority levels test uses two events one passes the notification counter as context. The other passes NULL. Both use the same notification function. So we need to check for NULL here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_selftest: efi_st_memcmp return difference of bytesHeinrich Schuchardt
If the memory regions are different efi_st_memcmp currently returns the difference of the addresses. Insted the difference of the first differing byte pair should be returned. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: supply EFI network testHeinrich Schuchardt
This patch provides an EFI application to check the correct function of the Simple Network Protocol implementation. It sends a DHCP request and analyzes the DHCP offer. Different error conditions including a 10s timeout are checked. A successful execution will look like this: => bootefi nettest Scanning disk ide.blk#0... Found 1 disks WARNING: Invalid device tree, expect boot to fail Network test DHCP Discover DHCP reply received from 192.168.76.2 (52:55:c0:a8:4c:02) as broadcast message. OK. The test was completed successfully. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_selftest: allow printing MAC addressesHeinrich Schuchardt
Add %pm as format string to print a MAC address. This is helpful when analyzing network problems. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_selftest: correct definition of efi_st_errorHeinrich Schuchardt
Enclose definition in parantheses to allow using efi_st_error like a void function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: fill return values in SimpleNetworkProtocolHeinrich Schuchardt
In the receive function all return values should be filled. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: size fields in SimpleNetworkProtocolHeinrich Schuchardt
The size fields in the Simple Network Protocol are all UINTN in the UEFI spec. So use size_t. Provide a function description of the receive function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: fix efi_net_get_statusHeinrich Schuchardt
The returned interrupt status was wrong. As out transmit buffer is empty we need to always set EFI_SIMPLE_NETWORK_TRANSMIT_INTERRUPT. When we have received a packet we need to set EFI_SIMPLE_NETWORK_RECEIVE_INTERRUPT. Furthermore we should call efi_timer_check() to handle events. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: implement WaitForPacket eventHeinrich Schuchardt
The WaitForPacket event informs that a network package has been received by the SimpleNetworkProtocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: Move is_signaled = true line into efi_net_push()] Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: use events for efi_net_receiveHeinrich Schuchardt
A timer event is defined. The timer handler cares for receiving new packets. efi_timer_check is called both in efi_net_transmit and efi_net_receive to enable events during network communication. Calling efi_timer_check in efi_net_get_status is implemented in a separate patch. [agraf] This patch is needed to make efi_net_get_status() actually report incoming packets. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> [agraf: fix spelling in comment] Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_net: return EFI_UNSUPPORTED where appropriateHeinrich Schuchardt
U-Boot does not implement all functions of the simple network protocol. The unimplemented functions return either of EFI_SUCCESS and EFI_INVALID_PARAMETER. The UEFI spec foresees to return EFI_UNSUPPORTED in these cases. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: efi_net: hwaddr_size = 6Heinrich Schuchardt
The length of a MAC address is 6. We have to set this length in the EFI_SIMPLE_NETWORK_MODE structure of the EFI_SIMPLE_NETWORK_PROTOCOL. Without this patch iPXE fails to initialize the network with error message SNP MAC(001e0633bcbf,0x0) has invalid hardware address length 0 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: fill simple network protocol revisionHeinrich Schuchardt
Provide the simple network protocol revision. This revision number could be used to identify backwards compatible enhancements of the protocol. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: correct bits of receive_filters bit maskHeinrich Schuchardt
Remove extraneous commas. Add comment. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: incorrect definition of EFI_SIMPLE_NETWORK_PROTOCOLHeinrich Schuchardt
WaitForPacket is an event and not a function pointer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-10-09efi_loader: wrong type in wait_for_eventHeinrich Schuchardt
The UEFI spec defines parameter index of WaitForEvent as UINTN*. So we should use size_t here. I deliberately do not use UINTN because I hold a following patch that will eliminate UINTN because uppercase types to not match the U-Boot coding style. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2025-01-17 03:46:24 +0000