summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-20arm: zynq: Move CONFIG_SF_DUAL_FLASH to defconfigMike Looijmans
Move the only use of CONFIG_SF_DUAL_FLASH to defconfig. This makes the associated topic_miamiplus.h header obsolete, so remove that as well. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Check pmufw versionMichal Simek
If PMUFW version is not v0.3 then panic. ZynqMP switch to CCF based clock driver which requires PMUFW to be present at certain version. This patch ensure that you use correct and tested PMUFW binary. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20fpga: zynqmppl: Reuse invoke_smc routineSiva Durga Prasad Paladugu
Reuse invoke_smc() routine which is already defined instead of duplicating same at multiple places. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Define routines for mmio write and readSiva Durga Prasad Paladugu
Define routines of mmio write and read functionalities for zynqmp platform. Also do not call SMC from SPL because SPL is running before ATF in EL3 that's why SMCs can't be called because there is nothing to call. zynqmp_mmio*() are doing direct read/write accesses and this patch does the same. PMUFW is up and running at this time and there is a way to talk to pmufw via IPI but there is no reason to implement IPI stuff in SPL if we need just simple read for getting clock driver to work. Also make invoke_smc as global so that it can be reused in multile places where ever possible. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm: zynq: Add Kconfig option for any DDR specific initializationSiva Durga Prasad Paladugu
Add Kconfig option for ddr init as this might be required in cases like ddr less systems where we want to skip ddrc init and this option is useful for it. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Do not map unused OCM/TCM regionMichal Simek
When OCM or TCM is protected this mapping still exist and it is causing access violation. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Add comment about level shifter mode v1Michal Simek
Silicon v1 didn't support SD boot mode with level shifter. Because system can't boot any error message is not shown that's why comment is just a record if someone tries to debug it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Add empty sleep.h file for psu_init* compilationMichal Simek
psu_init* contain sleep.h header which is not present in u-boot. Instead of keep comment sleep.h in psu_init* it is easier to add empty file which is included. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20block: sata: ceva: drop extraneous netdev.h includePeter Robinson
Drop include of netdev.h as it's a SATA driver not a network driver. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-20arm64: zynqmp: Decrease MALLOC size for SPLMichal Simek
Decrease malloc size to 1MB from 256MB. Huge malloc space is adding huge delay in mem_malloc_init() because we are enabling CONFIG_SYS_MALLOC_CLEAR_ON_INIT which clear the whole malloc space. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19Prepare v2017.07--rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19arm64: zynqmp: Fix psu_init* external functionsMichal Simek
In older vivado version some psu_init* files didn't contain mask*() which were missing. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: spl: use given boot_device instead of fetching it againJean-Francois Dagenais
The boot_device argument to spl_boot_mode was massively added without actually modifying the existing functions. This commit actually makes use of the handed value, which is the same. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: spl: fix dual SD controller supportJean-Francois Dagenais
When enabling both SDHCI controllers, spl_mmc.c would actually choose device sdhci0 even if booted from sdhci1 (boot_device). This is because spl_mmc_get_device_index(boot_device) expects BOOT_DEVICE_MMC2[_2] in order to return index 1 instead of 0. The #if defined(...) statement is copied from board/xilinx/zynqmp/zynqmp.c So the key to properly enabling both controllers as boot sources is defining both CONFIG_ZYNQ_SDHCI0 and CONFIG_ZYNQ_SDHCI1 in your board's include/configs/*.h. Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Wire SD1 level shifter mode to SPLMichal Simek
Add missing SD boot mode to SPL. zcu102-rev1.0 is supporting this boot mode. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19microblaze: Build only DTBs for selected targetMichal Simek
Adding more targets to repository requires some additional changes not simply just adding config file, defconfig and dts. This patch makes this process easier by building only particular DTB which is selected via defconfig that Makefile doesn't need to contain all dts files in the repository. Reported-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19arm64: zynqmp: Remove CPU_RELEASE_ADDR macroMichal Simek
CPU_RELEASE_ADDR is used only when CONFIG_ARMV8_MULTIENTRY is enabled. ZynqMP is running ATF which takes care about this that's why no need to have this macro. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-06-19configs: Resync defconfigsTom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19Merge git://git.denx.de/u-boot-usbTom Rini
2017-06-19Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2017-06-19odroid: remove CONFIG_DM_I2C_COMPAT configJaehoon Chung
Remove the CONFIG_DM_I2C_COMPAT config. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-06-18cmd: usb_mass_storage: Staticize do_usb_mass_storage()Fabio Estevam
Make do_usb_mass_storage() static to fix the following sparse warning: cmd/usb_mass_storage.c:136:5: warning: symbol 'do_usb_mass_storage' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-06-18cmd: usb_mass_storage: Use NULL for pointerFabio Estevam
Use NULL for pointer to fix the following sparse warning: cmd/usb_mass_storage.c:47:15: warning: Using plain integer as NULL pointer Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-06-18at91_udc.c: Fix unused variable warningTom Rini
With gcc-6 and later we see warnings that at91sam9263_udc_caps and at91rm9200_udc_caps are unused. Fixes: 620197670a69 ("usb: gadget: at91_udc: add at91_udc into U-Boot") Cc: Lukasz Majewski <lukma@denx.de> Cc: Marek Vasut <marex@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Heiko Schocher <hs@denx.de>
2017-06-17drivers/usb/ehci: Use platform-specific accessorsAlexey Brodkin
Current implementation doesn't allow utilization of platform-specific reads and writes. But some arches or platforms may want to use their accessors that do some extra work like adding barriers for data serialization etc. Interesting enough OHCI accessors already do that so just aligning EHCI to it now. This is a resend of http://patchwork.ozlabs.org/patch/726714/ Back in the day this patch broke some PPC and Sandbox boards as they we missing inclusion of "asm/io.h". Those missing items were fixed with: 1) http://patchwork.ozlabs.org/patch/751397/ 2) http://patchwork.ozlabs.org/patch/771099/ So now it should be safe to apply this patch. FWIW TravisCI builds everything with all 3 patches in place, see https://travis-ci.org/abrodkin/u-boot/builds/239563813 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Simon Glass <sjg@chromium.org> Cc: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
2017-06-17usb: dwc2: force to host mode if not support HNP/SRPMeng Dongyang
In current code, after running the command of "usb start", the controller will keep in otg mode and can't switch to host mode if not support SNP/SRP capability. So add the property of "hnp-srp-disable" in the DTS to config the contrller work in force mode of host. Signed-off-by: Meng Dongyang <daniel.meng@rock-chips.com>
2017-06-16powerpc, 5xx: remove some "5xx" remainsHeiko Schocher
we removed 5xx support. So delete some forgotten remains. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 82xx: remove some missed mpc82xx remainsHeiko Schocher
we removed 82xx support. Missed some 82xx remains, remove them now. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512xHeiko Schocher
There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de>
2017-06-16arm: mach-omap2: Generate MLO file from SD boot capable targetsAndrew F. Davis
Secure boot targets that can be loaded from an SD card FAT partition need to be called "MLO" on the filesystem, make a copy with this name to clarify the correct image for SD card booting. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2017-06-16cmd: ethsw: Fix out-of-bounds errorYork Sun
The for loop in cmd_keywords_opt_check() seems to use wrong array to set boundary, reported by Coverity analysis. Signed-off-by: York Sun <york.sun@nxp.com> CC: Joe Hershberger <joe.hershberger@ni.com> CC: Tom Rini <trini@konsulko.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reported-by: Coverity (CID: 163251) Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-06-16arm: ti: Add missing guards to headersSemen Protsenko
To prevent possible double inclusions in future. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: refactor default environmentHannes Schmelzer
For better readability and setup-handling we refactor the default environment. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: cosmetic cleanup of config-headerHannes Schmelzer
Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop obsolete CONFIG_LCD_NOSTDOUT from config-headerHannes Schmelzer
This define isn't used anymore in the u-boot source tree, so we drop it from the config header. We drop it also from the 'config_whitelist.txt' Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: drop bootlogo featureHannes Schmelzer
the BMP logo loading has become obsolete and is not used any more. So we drop the support for it. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-06-16board/BuR/brxre1: fix MMC bootHannes Schmelzer
since commit 'd5abcf94c7123167725fc22ace342f0d455093c1' - ti: boot: Register the MMC controllers in SPL in the same way as in u-boot MMC boot on brxre1 board is broken, with this commit we make our board working again. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
2017-06-16treewide: remove unneeded semicolonsMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-16defconfig: arm335x_evm_usbspl: Update MUSB EthernetMichael Welling
Adds CONFIG_SPL_USB_GADGET_SUPPORT and CONFIG_SPL_USBETH_SUPPORT. Removes CONFIG_SPL_NAND_SUPPORT, CONFIG_SPL_MTD_SUPPORT, and CONFIG_SPL_YMODEM_SUPPORT to free up space to fit in RAM. Signed-off-by: Michael Welling <mwelling@ieee.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-06-16include: nand: move endif to end of fileMugunthan V N
The terminator endif of ifdef _NAND_H_ should be at the end of file as a fail safe. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
2017-06-14Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-06-14Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini
2017-06-14sun50i: h5: Add initial NanoPi NEO2 supportJagan Teki
NanoPi NEO2 is designed and developed by FriendlyElec using the Allwinner 64-bit H5 SOC. NanoPi Neo2 key features - Allwinner H5, Quad-core 64-bit Cortex-A53 - 512MB DDR3 RAM - microSD slot - 10/100/1000M Ethernet - Serial Debug Port - 5V 2A DC MicroUSB power-supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14Revert "ARM: fixed relocation using proper alignment"Tom Rini
It turns out this change was not intended to be merged and as such, revert it. This reverts commit cdde7de0364ffa505d631b342f1a2fa729e8e67d. Reported-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-14sun50i: a64: Add initial Orangepi Win/WinPlus supportJagan Teki
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-14sun50i: h5: Add initial Orangepi Zero Plus 2 supportJagan Teki
Orangepi Zero Plus 2 is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Zero Plus 2 has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG+power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2017-06-12ARM: tegra: remove Whistler supportStephen Warren
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
2017-06-12powerpc: fsl: Update maintainersYork Sun
Update maintainers for B4860QDS, P1010RDB, P1_TWR, T104xRDB. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8569mds: Update config and maintainerYork Sun
Enable DHCP command by default. Update maintainer info. Signed-off-by: York Sun <york.sun@nxp.com>
2017-06-12powerpc: mpc8568mds: Update board configYork Sun
Enable DHCP command by default. Move environmental variable location to before U-Boot image. Enlarge reserved mem for malloc. Update maintainer. Signed-off-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2024-12-27 02:01:10 +0000