summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-01-28arm: Note vendor-required status of certain MACH_TYPE valuesTom Rini
In the cases of some boards, a MACH_TYPE number is used which is either not registered upstream or worse (for functionality) is re-using the number of a different (or reference) platform instead. Make sure we have a comment in these cases. Cc: Albert ARIBAUD <albert.aribaud@3adev.fr> Cc: Walter Schweizer <swwa@users.sourceforge.net> Cc: Stefan Roese <sr@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de>
2017-01-28am335x_shc: Drop MACH_TYPE usageTom Rini
This board is using MACH_TYPE values that were clearly picked during development and not registered. Remove rather than support. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28arm: Clean up MACH_TYPE_xxx usage after re-sync of mach-typesTom Rini
With the latest mach-types values we have many instances where we no longer need to define a value and a few cases where the name (but not value) have changed slightly. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28Revert "arm: Remove unregister MACH_TYPE_xxx uses"Tom Rini
This reverts commit 70b26cd057f42c7126088b49d4285955c8a00eae. This is not a strict revert as it is easier to fix board/atmark-techno/armadillo-800eva/armadillo-800eva.c to now the correct name (same value) than to revert that change too. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28arm: Re-sync with full list of MACH_TYPE_xxx valuesTom Rini
This re-syncs us with the official and full list of MACH_TYPE_xxx values from http://www.armlinux.org.uk/developer/machines/ Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28disk: convert CONFIG_PARTITION_TYPE_GUID to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPTPatrick Delaunay
We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-28kbuild: add include linux/kconfig.h in config.hPatrick Delaunay
Allow to use define CONFIG_IS_ENABLED in include/config_fallbacks.h Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28disk: convert CONFIG_EFI_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28disk: convert CONFIG_AMIGA_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28disk: convert CONFIG_ISO_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28disk: convert CONFIG_DOS_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28disk: convert CONFIG_MAC_PARTITION to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-28disk: convert CONFIG_PARTITIONS to KconfigPatrick Delaunay
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-27armv8: ls1046a: enable usb in defconfigTang Yuantian
Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-27armv8: ls1046a: added usb nodes in dtsTang Yuantian
The LS1046A processor has three integrated USB 3.0 controllers (USB1, USB2, and USB3) that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. USB1 and USB2 ports are powered by a NX5P2190UK device, which supplies 5v power at up to 1.2 A. The power enable and power-fault-detect pins are connected to the LS1046A processor via CPLD for individual port management. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-27armv8: ls1046aqds: added usb feature supportTang Yuantian
The LS1046AQDS processor has three integrated USB 3.0 controllers (USB1, USB2, and USB3) that allow direct connection to the USB ports with appropriate protection circuitry and power supplies. USB1 and USB2 ports are powered by a NX5P2190UK device, which supplies 5v power at up to 1.2 A. The power enable and power-fault-detect pins are connected to the LS1046A processor via CPLD for individual port management. Signed-off-by: Tang Yuantian <yuantian.tang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-01-27imx: mx6sxsabreauto: enable more dm driversPeng Fan
Enable MMC/I2C/GPIO/PMIC/REGULATOR/PCA953X DM drivers for mx6sxsabreauto board. Drop non-DM code. Note: The i.MX DM drivers has such dependency. MXC GPIO -> MXC I2C -> PFUZE/REGULATOR MXC GPIO -> PCA953X MXC GPIO -> FSL_USDHC So the drivers needs to be enabled all to avoid compiling error. The uboot dm tree log: => dm tree Class Probed Name ---------------------------------------- root [ + ] root_driver thermal [ ] |-- imx_thermal simple_bus [ + ] |-- soc simple_bus [ + ] | |-- aips-bus@02000000 simple_bus [ ] | | |-- spba-bus@02000000 gpio [ + ] | | |-- gpio@0209c000 gpio [ + ] | | |-- gpio@020a0000 gpio [ + ] | | |-- gpio@020a4000 gpio [ + ] | | |-- gpio@020a8000 gpio [ + ] | | |-- gpio@020ac000 gpio [ + ] | | |-- gpio@020b0000 gpio [ + ] | | |-- gpio@020b4000 simple_bus [ ] | | |-- anatop@020c8000 simple_bus [ ] | | |-- snvs@020cc000 pinctrl [ + ] | | `-- iomuxc@020e0000 pinconfig [ + ] | | `-- imx6x-sabreauto pinconfig [ + ] | | |-- i2c2grp-1 pinconfig [ + ] | | |-- i2c3grp-2 pinconfig [ ] | | |-- uart1grp pinconfig [ + ] | | |-- usdhc3grp pinconfig [ ] | | |-- usdhc3grp-100mhz pinconfig [ ] | | |-- usdhc3grp-200mhz pinconfig [ + ] | | |-- usdhc4grp pinconfig [ + ] | | `-- vccsd3grp simple_bus [ + ] | |-- aips-bus@02100000 mmc [ + ] | | |-- usdhc@02198000 mmc [ + ] | | |-- usdhc@0219c000 i2c [ + ] | | |-- i2c@021a4000 i2c_generic [ + ] | | | |-- generic_8 i2c_generic [ + ] | | | `-- generic_4e i2c [ + ] | | `-- i2c@021a8000 gpio [ + ] | | |-- gpio@30 gpio [ + ] | | `-- gpio@32 simple_bus [ ] | `-- aips-bus@02200000 simple_bus [ ] | `-- spba-bus@02200000 simple_bus [ + ] `-- regulators regulator [ + ] `-- regulator@0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-01-27imx: dts: mx6sxsabreauto: enable i2c2/3Peng Fan
Enable i2c2/3, add pinctrl settings. Add max7310 for i2c3. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-01-27imx: mx6sxsabreauto: enable pinctrl driverPeng Fan
Enable pinctrl driver for mx6sxsabreauto board. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-01-27imx: mx6sx: add dts for mx6sxsabreauto boardPeng Fan
Add dts for mx6sxsabreauto board. dts related files imported fro Linux (commit e5517c2a5a4). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
2017-01-27ARM: imx6ul: Move liteSOM source to SoC directoryMarcin Niestroj
Moving arch/arm/mach-litesom/ to arch/arm/cpu/armv7/mx6/ was requested in [1] during discussion of chiliSOM support patches. [1] http://lists.denx.de/pipermail/u-boot/2017-January/279137.html Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-01-27udoo_neo: Remove ramdiskaddr environment variableBreno Lima
Remove unused ramdiskaddr environment variable. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2017-01-27udoo_neo: Remove trailing semicolon and spaceBreno Lima
Remove the trailing semicolon and space. It's not necessary to have it on the last condition. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2017-01-27udoo_neo: Add fdt_addr_r environment variableBreno Lima
According to doc/README.distro: "fdt_addr_r: Mandatory. The location in RAM where the DTB will be loaded or copied to when processing the fdtdir/devicetreedir or fdt/devicetree options in extlinux.conf." So add the fdt_addr_r environment variable. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
2017-01-27imx_common: check for bmode Serial DownloaderStefan Agner
Before commit 81c4eccb55cc ("imx: mx6: fix USB bmode to use reserved value") a non-reserved value has been used to trigger Serial Downloader using bmode, which translated to a GPR9 value of 0x10. However, on some boards the non-reserved value lead to unreliable bmode command. With the above mentioned commit, U-boot switched to use [7:4] b0001, which translates to GPR9 0x10 for Serial Downloader mode. Check for the new value and classify it as Serial Downloader mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> CC: Stefano Babic <sbabic@denx.de> CC: Tim Harvey <tharvey@gateworks.com> CC: Fabio Estevam <Fabio.Estevam@freescale.com> CC: Eric Nelson <eric.nelson@boundarydevices.com>
2017-01-27imx: nitrogen6x: fix USB host initializationGary Bisson
USB Host scanning has been broken since v2016.05. This is due to all the USB changes that happened between v2016.03 and v2016.05, especially: 2ef117fe4f usb: Remove 200 ms delay in usb_hub_port_connect_change() a22a264ec3 usb: Change power-on / scanning timeout handling So we need to increase the init delay to 2s using the usb_pgood_delay environment variable. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
2017-01-27README: mxc_hab: Adapt the CONFIG_SECURE_BOOT text to KconfigFabio Estevam
Commit 6e1f4d2652e79 ("arm: imx-common: add SECURE_BOOT option to Kconfig") moved the CONFIG_SECURE_BOOT option to Kconfig, so update the mxc_hab README file to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
2017-01-27mx6qsabreauto: Pass the correct parallel NOR widthFabio Estevam
On mx6qsabreauto the parallel NOR width is 16 bits, so pass configure CONFIG_SYS_FLASH_CFI_WIDTH correctly so that the CFI driver does not use 8 bits by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2017-01-27tools: imximage: refactor header length calculations for imximage v1Martin Kaiser
We can use the same header length calculations for both imximage v1 and v2. This addresses TODO comments about imximage v1 in the current code. With this patch applied, *header_size_ptr in imximage_set_header() will have the correct value for both imximage v1 and v2. This is necessary for people wanting to add proprietary data behind the created imximage. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Cc: sbabic@denx.de
2017-01-26Merge git://www.denx.de/git/u-boot-marvellTom Rini
2017-01-26cmd: ubi: allow '-' to specify maximum volume sizeLadislav Michl
Currently maximum volume size can be specified only if no other arguments are used. Use '-' placeholder as volume size to allow maximum volume size to be specified together with volume id and type. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
2017-01-25Merge git://git.denx.de/u-boot-mpc85xxTom Rini
2017-01-25Drop CONFIG_CMD_DOCSimon Glass
This is not used in U-Boot, and the only usage calls a non-existent function. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25Drop prt_mpc5xxx_clks() in favour of print_cpuinfo()Simon Glass
Rather than having an arch-specific function, use the existing generic one. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25Drop the static inline print_cpuinfo()Simon Glass
This is only called from one place and the function cannot be inlined. Convert it to a normal function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25Drop CONFIG_WINBOND_83C553Simon Glass
This is not used in U-Boot. Drop this option and associated dead code. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25powerpc: Drop CONFIG_SYS_ALLOC_DPRAMSimon Glass
This is not defined anywhere in U-Boot. Drop this dead code. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25powerpc: Drop probecpu() in favour of arch_cpu_init()Simon Glass
To avoid an unnecessary arch-specific call in board_init_f(), rename this function. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25Convert CONFIG_ARCH_MISC_INIT to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_ARCH_MISC_INIT Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25Convert CONFIG_ARCH_EARLY_INIT_R to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_ARCH_EARLY_INIT_R Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25config: Drop CONFIG_ARCH_DMA_PIO_WORDSSimon Glass
This is not defined by any board in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org>
2017-01-25arm64: mvebu: Update bubt command MMC block device accessKonstantin Porotchkin
Update the MMC block device access code in bubt command implementation according to the latest MMC driver changes. Change-Id: Ie852ceefa0b040ffe1362bdb7815fcea9b2d923b Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
2017-01-25arm64: mvebu: Enable SDHCI/MMC support for the db-88f7040/8040Stefan Roese
This patch enables the MMC support for the SDHCI controller on the Armada 7k db-88f7040 and the Armada 8k db-88f8040 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 7040-db: Add SDHCI device tree nodesStefan Roese
This patch adds the SDHCI device tree nodes to the Armada 7040-db dts file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 7k/8k: Add SDHCI device tree nodesStefan Roese
This patch adds the SDHCI device tree nodes to the Armada AP806 dtsi file which is used by the Armada 7k/8K SoCs. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Enable SDHCI/MMC support for the db-88f3720Stefan Roese
This patch enables the MMC support for the SDHCI controller on the Armada 3700 db-88f3720 board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 3720-db: Add SDHCI device tree nodesStefan Roese
This patch adds the SDHCI device tree nodes to the Armada 3700-db dts file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
2017-01-25arm64: mvebu: Armada 3700: Add SDHCI device tree nodesStefan Roese
This patch adds the SDHCI device tree nodes to the Armada 3700 dtsi file. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Wilson Ding <dingwei@marvell.com> Cc: Victor Gu <xigu@marvell.com> Cc: Hua Jing <jinghua@marvell.com> Cc: Terry Zhou <bjzhou@marvell.com> Cc: Hanna Hawa <hannah@marvell.com> Cc: Haim Boot <hayim@marvell.com>
generated by cgit (git 2.34.1) at 2025-01-17 23:10:44 +0000