summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-11-16drivers/net/enc28j60.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: enc28j60.c: In function 'enc_receive': enc28j60.c:435:5: warning: variable 'eir_reg' set but not used [-Wunused-but-set-variable] enc28j60.c: In function 'enc_poll': enc28j60.c:503:5: warning: variable 'estat_reg' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/net/at91_emac.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: at91_emac.c: In function 'at91emac_write_hwaddr': at91_emac.c:477:15: warning: variable 'dev' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/mtd/dataflash.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: dataflash.c: In function 'AT91F_DataflashInit': dataflash.c:42:6: warning: variable 'last_part' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16drivers/spi/atmel_spi.c: Fix GCC 4.6 warningAnatolij Gustschin
Fix: atmel_spi.c: In function 'spi_xfer': atmel_spi.c:139:7: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16pip405.c: Fix GCC 4.6 build warningsStefan Roese
Fix: pip405.c: In function 'board_early_init_f': pip405.c:192:16: warning: variable 'tctp_clocks' set but not used [-Wunused-but-set-variable] pip405.c:182:16: warning: variable 'dataout' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16mip405.c: Fix GCC 4.6 build warningsStefan Roese
Fix: mip405.c: In function 'init_sdram': mip405.c:250:4: warning: variable 'tctp_clocks' set but not used [-Wunused-but-set-variable] mip405.c: In function 'initdram': mip405.c:629:9: warning: variable 'ds' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16auto_update.c: Fix GCC 4.6 build warningsStefan Roese
Fix: ../common/auto_update.c: In function 'au_check_header_valid': ../common/auto_update.c:94:16: warning: variable 'checksum' set but not used [-Wunused-but-set-variable] ../common/auto_update.c: In function 'do_auto_update': ../common/auto_update.c:400:30: warning: variable 'got_ctrlc' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16iop480_uart.c: Fix GCC 4.6 build warningsStefan Roese
Fix: iop480_uart.c: In function 'serial_init': iop480_uart.c:137:16: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16cmd_dasa_sim.c: Fix GCC 4.6 build warningsStefan Roese
Fix: cmd_dasa_sim.c: In function 'updatePci9054': cmd_dasa_sim.c:135:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] cmd_dasa_sim.c: In function 'clearPci9054': cmd_dasa_sim.c:189:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16cmd_pci405.c: Fix GCC 4.6 build warningsStefan Roese
Fix: cmd_pci405.c: In function 'do_loadpci': cmd_pci405.c:45:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16dlvision-10g.c: Fix GCC 4.6 build warningsStefan Roese
Fix: dlvision-10g.c: In function 'print_fpga_info': dlvision-10g.c:90:11: warning: variable 'feature_compression' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16nand_boot.c: Fix GCC 4.6 build warningsStefan Roese
Fix: nand_boot.c: In function 'nand_read_page': nand_boot.c:190:6: warning: variable 'stat' set but not used [-Wunused-but-set-variable] nand_boot.c: In function 'nand_boot': nand_boot.c:271:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16sata_dwc.c: Fix GCC 4.6 build warningsStefan Roese
Fix: sata_dwc.c: In function 'sata_dwc_softreset': sata_dwc.c:444:5: warning: variable 'status' set but not used [-Wunused-but-set-variable] sata_dwc.c:443:6: warning: variable 'serror' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'scan_sata': sata_dwc.c:654:16: warning: variable 'lba_desc' set but not used [-Wunused-but-set-variable] sata_dwc.c:538:16: warning: variable 'xfer_mask' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'ata_dev_read_id': sata_dwc.c:747:14: warning: variable 'reason' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'ata_dev_read_sectors': sata_dwc.c:1810:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] sata_dwc.c: In function 'ata_dev_write_sectors': sata_dwc.c:1994:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1620001122-1.c: Fix GCC 4.6 build warningStefan Roese
Fix: 20001122-1.c: In function 'fpu_post_test_math1': 20001122-1.c:37:22: warning: variable 'p' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1640x_spd_sdram.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 40x_spd_sdram.c: In function 'spd_sdram': 40x_spd_sdram.c:137:6: warning: variable 'sdram0_b3cr' set but not used [-Wunused-but-set-variable] 40x_spd_sdram.c:136:6: warning: variable 'sdram0_b2cr' set but not used [-Wunused-but-set-variable] 40x_spd_sdram.c:129:6: warning: variable 'sdram0_ecccfg' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1644x_spd_ddr2.c: Fix GCC 4.6 build warningsStefan Roese
44x_spd_ddr2.c: In function 'initdram': 44x_spd_ddr2.c:450:17: warning: variable 'dimm_spd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c: In function 'program_copt1': 44x_spd_ddr2.c:1003:16: warning: variable 'ddrtype' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c: In function 'DQS_calibration_process': 44x_spd_ddr2.c:2498:7: warning: variable 'window_found' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2497:16: warning: variable 'end_rffd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2496:16: warning: variable 'end_rqfd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2495:16: warning: variable 'begin_rffd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2494:16: warning: variable 'begin_rqfd' set but not used [-Wunused-but-set-variable] 44x_spd_ddr2.c:2493:7: warning: variable 'min_end' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-1644x_spd_ddr.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 44x_spd_ddr.c: In function 'program_cfg0': 44x_spd_ddr.c:384:16: warning: variable 'dimm_64bit' set but not used [-Wunused-but-set-variable] 44x_spd_ddr.c:383:16: warning: variable 'dimm_32bit' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16cmd_ecctest.c: Fix GCC 4.6 build warningsStefan Roese
Fix: cmd_ecctest.c: In function 'inject_ecc_error': cmd_ecctest.c:116:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] cmd_ecctest.c: In function 'rewrite_ecc_parity': cmd_ecctest.c:154:6: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-164xx_ibm_ddr2_autocalib.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 4xx_ibm_ddr2_autocalib.c: In function 'get_membase': 4xx_ibm_ddr2_autocalib.c:157:8: warning: variable 'bxcf' set but not used [-Wunused-but-set-variable] 4xx_ibm_ddr2_autocalib.c: In function 'DQS_calibration_methodB': 4xx_ibm_ddr2_autocalib.c:722:8: warning: variable 'rffd' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-164xx_pcie.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 4xx_pcie.c: In function 'pcie_read_config': 4xx_pcie.c:230:6: warning: variable 'address' set but not used [-Wunused-but-set-variable] 4xx_pcie.c: In function 'pcie_write_config': 4xx_pcie.c:290:6: warning: variable 'address' set but not used [-Wunused-but-set-variable] 4xx_pcie.c: In function 'ppc4xx_setup_pcie_rootpoint': 4xx_pcie.c:1066:17: warning: variable 'rmbase' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-164xx_enet.c: Fix GCC 4.6 build warningsStefan Roese
Fix: 4xx_enet.c: In function 'ppc_4xx_eth_init': 4xx_enet.c:875:6: warning: variable 'ethgroup' set but not used [-Wunused-but-set-variable] I used "__maybe_unused" here intentionally, since all other alternatives to fix this compilation warning would result in more ifdef's. Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16usb_ohci.c: Fix GCC 4.6 build warningsStefan Roese
Fix: usb_ohci.c: In function 'dl_transfer_length': usb_ohci.c:756:8: warning: variable 'tdINFO' set but not used [-Wunused-but-set-variable] Signed-off-by: Stefan Roese <sr@denx.de>
2011-11-16arch/powerpc/cpu/mpc512x/i2c.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: i2c.c: In function 'wait_for_bb': i2c.c:81:16: warning: variable 'temp' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16arch/powerpc/cpu/mpc512x/pci.c: Fix GCC 4.6 warningsAnatolij Gustschin
Fix: pci.c: In function 'pci_init_board': pci.c:55:26: warning: variable 'pci_conf' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de>
2011-11-16board/esd/cpci750/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: sdram_init.c: In function 'check_dimm': sdram_init.c:267:50: warning: variable 'trrd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:37: warning: variable 'tras_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:24: warning: variable 'trcd_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:267:8: warning: variable 'trp_clocks' set but not used [-Wunused-but-set-variable] sdram_init.c:253:16: warning: variable 'spd_checksum' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'initdram': sdram_init.c:1693:14: warning: variable 's1' set but not used [-Wunused-but-set-variable] sdram_init.c:1693:6: warning: variable 's0' set but not used [-Wunused-but-set-variable] Biggest part o the fix is converting the custom debug code to standard debug(). No attempts were made to cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2011-11-16board/esd/cpci750/cpci750.c: Fix error handlingWolfgang Denk
ThE code recorded error conditions but did not pass these on to the higher level caller. Fixing this fixes also this build warning: cpci750.c: In function 'do_loadpci': cpci750.c:569:6: warning: variable 'status' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
2011-11-16drivers/video/ct69000.c: Fix GC 4.6 build warningWolfgang Denk
Convert custom debug code to use standard debug() facility. This also fixes these build warning: ct69000.c: In function 'FindAndSetPllParamIntoXrRegs': ct69000.c:706:28: warning: variable 'new_pixclock' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
2011-11-16common/cmd_universe.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: cmd_universe.c: In function 'universe_init': cmd_universe.c:49:17: warning: variable 'lastError' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16common/cmd_fdc.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: cmd_fdc.c: In function 'fdc_read_data': cmd_fdc.c:435:6: warning: variable 'flags' set but not used [-Wunused-but-set-variable] cmd_fdc.c:432:16: warning: variable 'pcn' set but not used [-Wunused-but-set-variable] cmd_fdc.c:431:20: warning: variable 'lastblk' set but not used [-Wunused-but-set-variable] Note: no attempts were made to otherwise cleanup the code. Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/zuma_pbb_mbox.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: zuma_pbb_mbox.c: In function 'zuma_mbox_dump': zuma_pbb_mbox.c:115:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] zuma_pbb_mbox.c:117:2: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/zuma_pbb_mbox.c: CodingStyle cleanupWolfgang Denk
Make (mostly) checkpatch-clean Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/sdram_init.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: sdram_init.c: In function 'setup_sdram_common': sdram_init.c:333:49: warning: variable 'ecc' set but not used [-Wunused-but-set-variable] sdram_init.c: In function 'setup_sdram': sdram_init.c:410:13: warning: variable 'check' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/eth.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: eth.c: In function 'gt6426x_handle_SMI': eth.c:130:15: warning: variable 'psr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/evb64260.c: Fix GC 4.6 build warningWolfgang Denk
Fix: evb64260.c: In function 'debug_led': evb64260.c:363:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16board/evb64260/i2c.c: Fix GCC 4.6 build warningsWolfgang Denk
Fix: i2c.c: In function 'i2c_init': i2c.c:23:15: warning: variable 'actualFreq' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Eran Man <eran@nbase.co.il> Acked-by: Heiko Schocher <hs@denx.de>
2011-11-16board/evb64260/i2c.c: Coding Style cleanupWolfgang Denk
Make checkpatch-clean Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Eran Man <eran@nbase.co.il>
2011-11-16drivers/block/sym53c8xx.c: Fix GCC 4.6 build warningWolfgang Denk
Fix: sym53c8xx.c: In function 'scsi_write_dsp': sym53c8xx.c:456:16: warning: variable 'val' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
2011-11-16drivers/block/sata_sil3114.c: Fix GCC 4.6 build warningKumar Gala
Fix: sata_sil3114.c: In function 'scan_sata': sata_sil3114.c:793:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:794:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:795:39: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:795:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:797:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:800:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:801:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:802:39: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:802:7: warning: array subscript is above array bounds [-Warray-bounds] sata_sil3114.c:804:7: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16drivers/bios_emulator/x86emu/ops.c: Fix GCC 4.6 build warningKumar Gala
Fix: x86emu/ops.c: In function 'x86emuOp_int3': x86emu/ops.c:3521:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_int_IMM': x86emu/ops.c:3549:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_into': x86emu/ops.c:3579:9: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] x86emu/ops.c: In function 'x86emuOp_aad': x86emu/ops.c:3993:8: warning: variable 'a' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16drivers/block/ahci.c: Fix GCC 4.6 build warningKumar Gala
Fix: ahci.c: In function 'ata_scsiop_read10': ahci.c:564:6: warning: variable 'lba' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-11-16davinci, mmc: fix gcc 4.6 build warningsHeiko Schocher
Fix: davinci_mmc.c: In function 'dmmc_wait_fifo_status': davinci_mmc.c:72:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable] davinci_mmc.c: In function 'dmmc_busy_wait': davinci_mmc.c:89:7: warning: variable 'mmcstatus1' set but not used [-Wunused-but-set-variable] Delete the unused variable. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-11-16FPGA: drivers/fpga/ivm_core.c: GCC4.6 fix build warningsStefano Babic
Fix: ivm_core.c: In function 'ispVMLCOUNT': ivm_core.c:2105:16: warning: unused variable 'usByte' Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Wolfgang Denk <wd@denx.de>
2011-11-16Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk
* 'master' of git://git.denx.de/u-boot-video: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
2011-11-16Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk
* 'master' of git://git.denx.de/u-boot-arm: arm, davinci: add DAVINCI_MMC_CLKID arm, davinci_emac: fix driver bug if more then 3 PHYs are detected arm, davinci: da850/dm365 lowlevel cleanup omap5: Add omap5_evm board build support. omap4/5: Add support for booting with CH. omap5: emif: Add emif/ddr configurations required for omap5 evm omap5: clocks: Add clocks support for omap5 platform. omap5: Add minimal support for omap5430. omap: Checkpatch fixes omap4: make omap4 code common for future reuse GCC4.6: Squash warnings in onenand_base.c GCC4.6: Fix common/usb.c on xscale OneNAND: Add simple OneNAND SPL PXA: vpac270: Enable the new generic MMC driver PXA: Cleanup serial_pxa PXA: Drop csb226 and innokom boards (unmaintained) m28evk: Fix comment about the number of RAM banks mx31: Fix checkpatch warnings in generic.c mx31: Use proper IO accessor for GPR register mx31: Remove duplicate definition for GPR register qong: Use generic function for configuring GPR register M28EVK: Enable USB HOST support iMX28: Add USB HOST driver iMX28: Add USB and USB PHY register definitions M28: Add memory detection into SPL iMX28: Fix ARM vector handling M28: Add doc/README.m28 documentation M28: Add MMC SPL iMX28: Add support for DENX M28EVK board iMX28: Add u-boot.sb target to Makefile iMX28: Add image header generator tool iMX28: Add driver for internal RTC iMX28: Add GPMI NAND driver iMX28: Add APBH DMA driver iMX28: Add SPI driver iMX28: Add GPIO control iMX28: Add I2C bus driver iMX28: Add PINMUX control FEC: Add support for iMX28 quirks iMX28: Add SSP MMC driver iMX28: Initial support for iMX28 CPU MX25: zmx25: GCC4.6 fix build warnings da850: add new config file for AM18xx BeagleBoard: config: Switch to ttyO2 OMAP3: Change omap3_evm maintainer devkit8000: Fix NAND SPL on boards with 256MB NAND integrator: enable Vpp and disable flash protection integrator: add system controller header integrator: make flash writeable on boot integrator: use io-accessors for board init integrator: move text offset to config integrator: pass configs for core modules ARM: remove superfluous setting of arch_number in board specific code. SPL: Allow ARM926EJS to avoid compiling in the CPU support code integrator: do not test first part of the memory arm: a320: fix broken timer ARM: define CONFIG_MACH_TYPE for all ronetix boards dm646x: pass board revision info to kernel dm646x: add new configuration for dm6467T arm, davinci: Fix setting of the SDRAM configuration register arm, davinci: Remove the duplication of LPSC functions arm, davinci: Rename AM1808 lowlevel functions to DA850 da8xxevm: fix build error ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: Fix constness of the fdt void pointer in fdt_getprop_u32_default Add some missing endian conversions in fdt_support.c
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-fdtWolfgang Denk
* 'master' of git://git.denx.de/u-boot-fdt: Fix constness of the fdt void pointer in fdt_getprop_u32_default Add some missing endian conversions in fdt_support.c
2011-11-16Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk
* 'master' of /home/wd/git/u-boot/custodians: powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning drivers/qe/uec.c: Fix GCC 4.6 build warning drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning drivers/net/fm/fm.c: Fix GCC 4.6 build warning board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning board/freescale/common/pixis.c: Fix GCC 4.6 build warning board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning phylib: Enable AR8021 phy support powerpc/85xx: Set max alloc length to 10MB on P1022DS powerpc/mpc85xx: Set SYSCLK to the required frequency powerpc/85xx: Fix NAND SPL support powerpc/85xx: Fix MPC8572DS NAND build fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399 powerpc/85xx: Add support for Book-E MMU Arch v2.0 powerpc/85xx: Make inclusion of USB device fixup conditional powerpc/85xx: Fix warning for USB device-fixup powerpc/85xx: resize the boot page TLB before relocating CCSR powerpc/85xx: verify the current address of CCSR before relocating it powerpc/85xx: add some missing sync instructions in the CCSR relocation code powerpc/85xx: fix some comments in the CCSR relocation code powerpc/85xx: fix definition of MAS register macros powerpc/mpc8548cds: Fix network initialization powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 powerpc/QorIQ: fix network frame manager TBI PHY address settings
2011-11-16Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk
* 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NAND arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/ddr/options.c: Fix GCC 4.6 build warning drivers/qe/uec.c: Fix GCC 4.6 build warning drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning drivers/net/fm/fm.c: Fix GCC 4.6 build warning board/sbc8560/sbc8560.c: Fix GCC 4.6 build warning board/sbc8548/sbc8548.c: Fix GCC 4.6 build warning board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warning board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warning board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warning board/freescale/common/pixis.c: Fix GCC 4.6 build warning board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc8xxx/fsl_lbc.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/tlb.c: Fix GCC 4.6 build warning arch/powerpc/cpu/mpc85xx/cpu_init.c: Fix GCC 4.6 build warning phylib: Enable AR8021 phy support powerpc/85xx: Set max alloc length to 10MB on P1022DS powerpc/mpc85xx: Set SYSCLK to the required frequency powerpc/85xx: Fix NAND SPL support powerpc/85xx: Fix MPC8572DS NAND build fsl_ifc: Fixed a bug in the erratum handling code for IFC_A003399 powerpc/85xx: Add support for Book-E MMU Arch v2.0 powerpc/85xx: Make inclusion of USB device fixup conditional powerpc/85xx: Fix warning for USB device-fixup powerpc/85xx: resize the boot page TLB before relocating CCSR powerpc/85xx: verify the current address of CCSR before relocating it powerpc/85xx: add some missing sync instructions in the CCSR relocation code powerpc/85xx: fix some comments in the CCSR relocation code powerpc/85xx: fix definition of MAS register macros powerpc/mpc8548cds: Fix network initialization powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 powerpc/QorIQ: fix network frame manager TBI PHY address settings
generated by cgit (git 2.34.1) at 2024-12-29 00:01:56 +0000