summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-07part: efi: comment for GPT_HEADER_SIGNATURE_UBOOTHeinrich Schuchardt
Add a comment indicating that the value of GPT_HEADER_SIGNATURE_UBOOT equals the ASCII string 'EFI PART'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: clear screen should move cursor to homeHeinrich Schuchardt
On a VT100 terminal <ESC>[2J should be enough to both clear the whole screen and set the cursor to position (1, 1). But the Linux console does not behave like this. So send an extra <ESC>[H. For reference see the console_codes(4) man page. Add a function description. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07test/py: describe env__efi_loader_helloworld_fileHeinrich Schuchardt
Describe the components of environment variable env__efi_loader_helloworld_file. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: git ignore helloworld_efi.SHeinrich Schuchardt
Add *.S to .gitignore. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_selftest: Update .gitignoreSughosh Ganu
Add the following file to .gitignore efi_miniapp_file_image_exception.h Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Use efi_miniapp_*.h instead of file enumeration. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: export efi_install_fdt()Heinrich Schuchardt
Use a pointer to addressable memory instead of a "physical" address in the virtual address space of the sandbox to efi_install_fdt(). Export the efi_install_fdt() function. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: carve out efi_run_image()Heinrich Schuchardt
Provide public function efi_run_imager() which can be used to run an UEFI image from memory. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: use hardware device tree by defaultHeinrich Schuchardt
If the bootefi command is called without passing the address of a device tree, the internal device tree is used. For devices with a hardware device tree it is preferable to used the hardware device tree in this case. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: pass address to efi_install_fdt()Heinrich Schuchardt
As part of moving the parsing of command line arguments to do_bootefi() call efi_install_fdt() with the address of the device tree instead of a string. If the address is EFI_FDT_USE_INTERNAL (= 0), the internal device tree is used. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: adjust file system infoHeinrich Schuchardt
When the GetInfo() method of the EFI_FILE_PROTOCOL is called to retrieve the file system info we claim that the volume is read only and has no free space. This leads to failures in programs that check this information before writing to the volume like SCT's InstallSct.efi. Currently there is no function to determine these parameters in U-Boot. So let's return optimistic values: Return that the volume is writable. Return the volume size as free space. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07efi_loader: imply USB_KEYBOARD_FN_KEYSHeinrich Schuchardt
UEFI applications like GRUB and SCT assume that function keys are enabled on the keyboard. Let EFI_LOADER imply USB_KEYBOARD_FN_KEYS. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07include: pe.h: add signature-related definitionsAKASHI Takahiro
The index (IMAGE_DIRECTORY_ENTRY_SECURITY) in a table points to a region containing authentication information (image's signature) in PE format. WIN_CERTIFICATE structure defines an embedded signature format. Those definitions will be used in my UEFI secure boot patch. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07configs: qemu: enable FIT images on qemu_arm(64)_defconfigHeinrich Schuchardt
For testing UEFI FIT images we need FIT image support on QEMU. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07test/py: Fix broken 'notbuildconfigspec' markerCristian Ciocaltea
Consider the following test sample: @pytest.mark.buildconfigspec('fit') @pytest.mark.notbuildconfigspec('generate_acpi_table') def test_sample(u_boot_console): Whatever the argument of the 'notbuildconfigspec' is, the test ends up being skipped with the message: ('/uboot/test/py/conftest.py', 463, 'Skipped: .config feature "fit" enabled') Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07bdinfo: show multi_dtb_fitHeiko Schocher
if MULTI_DTB_FIT is enabled it is helpful to display the value of gd->multi_dtb_fit in bdinfo. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07cmd_ut: add a parameter prefix to the function cmd_ut_categoryPhilippe Reynes
There is black magic in the file conftest.py that list all the test unit. Then, all those test unit are called in pytest. This call is done with the end of the name (for example checksum if the full name is bloblist_test_checksum). The result is that only test for dm are really executed. by pytest, all others tests are listed but never executed. This behaviour happens because the dm test unit only check the end of the name and others tests checks the full name. To fix this issue, I've added a prefix to the function cmd_ut_category, and this prefix is removed when looking for the unit test. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-07power: regulator: support off-on-delay-usPeng Fan
off-on-delay-us has been supported by Linux, so let's use it. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-01-07remoteproc: stm32: load resource table from firmwareFabien Dessenne
Load the optional resource table from the firmware, and write its address in the dedicated backup register. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07stm32mp1: remove copro_state environment variableFabien Dessenne
Since the coprocessor state is tracked in a backup register, there is no more need for tracking it in an environment variable : remove it. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07remoteproc: stm32: track the coprocessor state in a backup registerFabien Dessenne
Update the dedicated backup register to track the coprocessor state and rely on that register to compute the .is_running() value (which expects a return value of 0 -not 1- if the processor is running). Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07stm32mp1: reset coprocessor status at cold bootFabien Dessenne
Reset ResourceTableAddress and CoprocessorState at cold boot, preserve these values at standby wakeup. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07stm32mp1: declare backup registers for coprocessorFabien Dessenne
Use the backup register #17 as coprocessor resource table address and backup register #18 as coprocessor state. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-01-07remoteproc: elf_loader: Add elf resource table load supportFabien Dessenne
Add rproc_elf_load_rsc_table(), which searches for a resource table in an elf64/elf32 image, and if found, copies it to device memory. Add also the elf32 and elf64 variants of this API. Add a test for this. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07spl: fit: Allow the board to tell if more images must be loaded from FITJean-Jacques Hiblot
spl_fit_get_image_name() is used to get the names of the images that the SPL must load from the FIT. It relies on the content of a property present in the FIT. The list of images is thus statically defined in the FIT. With this scheme, it quickly becomes hard to manage combinations of more than a handful of images. To address this problem, give the board driver code the opportunity to add to the list of images. The images from the FIT property are loaded first, and then the board_get_fit_loadable() is called to get more image names. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07dts: Add support for adding DT overlays in u-boot.imgJean-Jacques Hiblot
If u-boot.img is a FIT image, CONFIG_OF_OVERLAY_LIST can be used to add DT overlays to u-boot.img. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07include: board: provide empty stubs when the BOARD option is not selectedJean-Jacques Hiblot
Useful to avoid #ifdef throughout the code that uses the board driver API. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07drivers: board: Add get_fit_loadable()Jean-Jacques Hiblot
This function will be used by the SPL to get the names of images to load from the FIT. This allows to load different images based on runtime HW detection. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07drivers: board: Make the board drivers available in SPLJean-Jacques Hiblot
Make the board driver available in the SPL too. The board driver is a way to provide useful information about the board and that can be useful in the SPL too. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: constify the output parameter of spl_fit_get_image_name()Jean-Jacques Hiblot
There is no need for it to be non-constant. Making it constant, allows to return constant string without warning. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_FIT_APPLY_OVERLAY is ↵Jean-Jacques Hiblot
enabled In order to apply an overlay to a DTB. The DTB must have been generated with the option '-@'. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: be more verbose when an error occurs when applying the overlaysJean-Jacques Hiblot
There are many ways the overlay application can fail. 2 of them are probably the most common: - the application itself failed. Usually this is comes from an unresolved reference - DTBO not available in FIT (could be because of a typo) In both case it is good to be more explicit about the error and at least show which overlay is failing. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: Do not fail immediately if an overlay is not availableJean-Jacques Hiblot
If one overlay that must be applied cannot be found in the FIT, the current implementation stops applying the overlays. Let's make it skip only the failing overlay instead. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: allocate a temporary buffer to load the overlaysJean-Jacques Hiblot
If the node describing an overlay does not specify a load address, it will be loaded at the address previously used. Fixing it by allocating a temporary buffer that will be used as a default load address. By default, the size of the buffer is 64kB which should be plenty for most use cases. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: Make room in the FDT before applying overlaysJean-Jacques Hiblot
Make room in the FDT before applying the overlay, otherwise it may fail if the overlay is big. As the exact added size is not known in advance, just add the size of the overlay. Move after the end of the application of the overlays, the resize of the FDT for the injection of the details on the loadables. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: Add support for applying DT overlayMichal Simek
doc/uImage.FIT/overlay-fdt-boot.txt is describing how to create FIT image with DT overlays in it. Add support for this feature to SPL. Here is the ZynqMP fragment where dtb points to full DT and dtbo is overlay which should be applied on the top of dtb. config { description = "ATF with full u-boot overlay"; firmware = "atf"; loadables = "uboot"; fdt = "dtb", "dtbo"; }; The whole feature depends on OF_LIBFDT_OVERLAY which is adding +4kB code and 0 for platforms which are not enabling this feature. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-07spl: fit: don't load the firmware twiceJean-Jacques Hiblot
When u-boot.img is a FIT image generated automatically by mkimage, the configuration node has the following structure: conf-1 { description = "k3-am654-base-board"; firmware = "firmware-1"; loadables = "firmware-1"; fdt = "fdt-1"; }; The firmware is referenced twice. Once by the 'firmware' property and once by the 'loadables' property. Currently this result in the firmware being loaded twice. This is not a big problem but has an impact on the boot time. Fixing it by not loading a loadable image if it is also the firmware image. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andreas Dannenberg <dannenberg@ti.com>
2020-01-07tools: dumpimage: Fall-though to print usage for help commandAndrew F. Davis
This has the same result but some compilers will warn about this fall-through if there are statements as part of the label block. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07tools: fit_image: Use fit_image_get_data_and_size for getting offset/sizeAndrew F. Davis
This is very similar to fit_image_get_data but has the benefit of working on FIT images with external data unlike fit_image_get_data. This is useful for extracting sub-images from type of FIT image as this would previously just silently fail. Add an error message also so if this still fails it is easier to find out why. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07tools: dumpimage: Provide more feedback on internal errorsAndrew F. Davis
The dumpimage utility errors out in a number of places without providing sufficient feedback to allow the user to easily determine what has gone wrong. Add additional error messages to make the cause of the failure more obvious. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07board: amlogic: select PWRSEQ for all amlogic platformAnand Moon
commit a10388dc6982 ("mmc: meson-gx: add support for mmc-pwrseq-emmc") introduce CONFIG_PWRSEQ for power sequence for eMMC module on amlogic platform, so enable this to all amlogic boards. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07configs: meson64: enable GIC support for G12A/G12BAnand Moon
Enable GIC support for G12A/G12B platform. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-01-07boards: amlogic: add Khadas VIM3L supportChristian Hewitt
Khadas VIM3L uses the same board layout as VIM3, but with an S905D3 chip instead of A311D. Board config is derived from khadas-vim3_defconfig and sei610_defconfig. README is based on README.khadas-vim3; the difference is that VIM3L uses FIP files from the g12a folder in vendor sources not the g12b folder. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: added vim3l readme into w400 MAINTAINERS]
2020-01-07Merge tag 'u-boot-imx-20200107' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx New for 2020.04 --------------- - New boards Embedded Artists COM board Xea Board - Switch to DM: Aristainetos boards Toradex colibri (DM_ETH) iCubox GE bx50v3 mx7dsabre (DM_ETH) cx9020 - New features: Bootaux with elf files Default SYS_THUMB_BUILD for i.MX6/7 - Fixes: DHCOM i.MX6 PDK Engicam i.MX8M tools (imx8m_image) Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/633679664
2020-01-07Merge tag 'u-boot-atmel-2020.04-a' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-atmel First set of u-boot-atmel features for 2020.04 cycle This feature set is a patch series from Tudor Ambarus which includes parsing of the spi flash SFDP parser for SST flashes, and using those tables to retrieve unique saved per device MAC address. This is then used as base mac address on the SAMA5D2 Wireless SOM EK board.
2020-01-07ddr: socfpga: Enable ARM64 Non-Secure SDRAM ECC AccessThor Thayer
The ECC registers in the SDRAM HMC Adapter should always be accessible (both when ECC is enabled and disabled). Currently, the registers are accessible only when ECC is enabled. The ECC Enabled bit is used to determine the status of ECC by later OSes so always allow access. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07arm: socfpga: stratix10: Enable SMMU accessThor Thayer
Enable TCU access through the Stratix10 CCU so that the SMMU can access the SDRAM. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com>
2020-01-07configs: socfpga: fix building Stratix10 and AgilexSimon Goldschmidt
This fixes a merge error that accidentally left CONFIG_MTD_DEVICE active by removing it from the config file. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: socfpga: agilex: Enable Agilex SoC buildLey Foon Tan
Add build support for Agilex SoC. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07configs: socfpga: Move Stratix10 and Agilex common CONFIGsLey Foon Tan
Move Stratix10 and Agilex common CONFIGs to socfpga_soc64_common.h. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-01-07arm: dts: agilex: Add base dtsi and devkit dtsLey Foon Tan
Add device tree files for Agilex SoC platform. socfpga_agilex-u-boot.dtsi and socfpga_agilex_socdk-u-boot.dts contains Uboot specific DT properties. socfpga_agilex.dtsi and socfpga_agilex_socdk.dts are from Linux (kernel/git/dinguyen/linux.git, commit 6f0bf971bacacc) Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
generated by cgit (git 2.34.1) at 2025-01-12 15:02:44 +0000