summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-07-20rockchip: fennec-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: evb-rk3288: add -u-boot.dtsiKever Yang
Move U-Boot relate dts node/property into -u-boot.dtsi Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: enable TPL for evb-rk3288Kever Yang
Enable TPL for evb-rk3288 so that we can have a free size limited SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: add default TPL_LDSCRIPT value in KconfigKever Yang
We share the same TPL_LDSCRIPT for all rk3288 board, add default value in Kconfig. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: move configure_l2ctlr back to rk3288Kever Yang
The configure_l2ctlr() is used only by rk3288, do not need to locate in sys_proto.h Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: add arch_cpu_init in splKever Yang
Add arch_cpu_init() in SPL for soc related init, and move configure_l2ctlr() into it. The arch_cpu_init() only need to run once, so no need to run in TPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: default enable SPL LIBCOMMON and LIBGENERICKever Yang
We needs SPL LIBCOMMON and LIBGENERIC for all boards, so we can enable them by default and no need to define in each board. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3368: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3368 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3328: use defaule value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3328 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3399 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: use default value for SYS_MALLOC_F_LENKever Yang
There is no difference in rk3288 board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk322x: use defconfig for SYS_MALLOC_F_LENKever Yang
There is no difference in rk322x board use for SYS_MALLOC_F_LEN, so we can use default value. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move ROCKCHIP_BOOT_MODE_REG to soc KconfigKever Yang
Rockchip SoCs have different ROCKCHIP_BOOT_MODE_REG value, move it to SoC's own Kconfig, and add address for rk3128 and rk3328 so that all SoCs have available address. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3399 config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3368 config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk3288 config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: Kconfig: move rk322x config into its KconfigKever Yang
Each SoC have its config setting and its Kconfig, move the specific setting to its own Kconfig file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: fixup board choice in KconfigKever Yang
Kconfig for board target select is choice option, fixup for rk3036, rk3288 and rv1108. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: remove redundant pinctrl header includingKever Yang
No code is using this header file, remove it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3288: remove pinctrl init in spl_board_initKever Yang
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3188: remove pinctrl init in spl_board_initKever Yang
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: rk3399: remove pinctrl init in spl_board_initKever Yang
The pinctrl will default init the io while driver is probe with new pinctrl driver. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-20rockchip: dts: rk3399: rock-pi-4: Use LPDDR4-100 dtsiJagan Teki
Use LPDDR4-100 sdram timings dtsi for RockPI-4 board. All these timings are processed during TPL stage of rock-pi-4 board, bootchain. This make TPL would replace rockchip in house rkbin in current bootchain. Bootchain after and before this change: TPL -> SPL -> U-Boot proper rkbin -> SPL -> U-Boot proper Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20rockchip: dts: rk3399: nanopi-neo4: Use DDR3-1866 dtsiJagan Teki
Use DDR3-1866 2GB ddr timings dtsi for 1GB NanoPi Neo4 board. Since sdram rk3399 support dynamic stride and rank detection it can able to detect 1GB ddr eventough the timings are meant for dual channel, 2GB size. Bootchain after and before this change are: TPL -> SPL -> U-Boot proper rkbin -> SPL -> U-Boot proper This certainly fix the second channel data training initialization since we have dynamic rank, stride where second channel capabilities are clear or memset to 0. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: dts: rk3399: rockpro64: Use LPDDR4-100 dtsiJagan Teki
Use LPDDR4-100 sdram timings dtsi for Rockpro64 board. All these timings are processed during TPL stage of rockpro64 board, bootchain. This make TPL would replace rockchip in house rkbin in current bootchain. Bootchain after and before this change: TPL -> SPL -> U-Boot proper rkbin -> SPL -> U-Boot proper Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: dts: rk3399: Add LPDDR4-100 timingsJagan Teki
Add sdram timings for LPDDR4-100 via rk3399-sdram-lpddr4-100.dtsi file. all timings are dumped from rkbin/bin/rk33/rk3399_ddr_800MHz_v1.20.bin Associated LPDDR4 board -u-boot.dtsi can include this to make these timings available during SPL or TPL stages. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21configs: rock-pi-4: Enable LPDDR4 supportJagan Teki
Due to foot-print issues, we have LPDDR4 code can be marked as CONFIG_RAM_RK3399_LPDDR4. So, enable it for Rock-PI-4 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21configs: rockpro64: Enable LPDDR4 supportJagan Teki
Due to foot-print issues, we have LPDDR4 code can be marked as CONFIG_RAM_RK3399_LPDDR4. So, enable it for Rockpro64 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Add lpddr4 set rate supportJagan Teki
Unlike rest of dram type chips, LPDDR4 initialization start with at board selected frequency (say 50MHz) and then it switches into 400MHz and 800MHz simultaneously to make the proper sequence work on each channel with associated training. The lpddr4 set rate sequnce will follow by setting lpddr4 - dq out - ca odt - MR3 - MR12 - MR14 registers sets in sequential order. Here is sameple log about LPDDR4-100 init sequence in Rockpro64: Channel 0: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB Channel 1: LPDDR4, 50MHz BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB 256B stride channel 0 training pass channel 1 training pass change freq to 400 MHz 0, 1 channel 0 training pass channel 1 training pass change freq to 800 MHz 1, 0 This patch add support to this init sequence via lpddr4 set rate by taking sdram timing parameters from 400, 800 .inc files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> (Fix travis error, use one ret instead of ret[2] in set_ctrl) Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add set_rate sdram rk3399 opsJagan Teki
DDR set rate can be even required for lpddr4 and we need to keep the lpddr4 code to compile only for relevant boards which do support lpddr4. For this requirement, and for code readability handle data training via sdram_rk3399_ops with .set_rate and same will update in future while supporting lpddr4 code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDDR4-800 timings incJagan Teki
LPDDR4 initialization start with at board selected frequency and then it switches into 400MHz and 800MHz simultaneously to make the proper sequence work on each channel with associated training. So, add LPDDR4-800 timings inc file in driver area so-that these timings will take during LPDDR4 initialization phase. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDDR4-400 timings incJagan Teki
LPDDR4 initialization start with at board selected frequency and then it switches into 400MHz and 800MHz simultaneously to make the proper sequence work on each channel with associated training. So, add LPDDR4-400 timings inc file in driver area so-that these timings will take during LPDDR4 initialization phase. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21clk: rockchip: rk3399: Set 400MHz ddr clockJagan Teki
Add support for setting 400MHz ddr clock. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21clk: rockchip: rk3399: Set 50MHz ddr clockJagan Teki
Add support for setting 50MHz ddr clock. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: dts: rk3399: Add u-boot, dm-pre-reloc for pmuJagan Teki
Add u-boot,dm-pre-reloc property for pmu in rk3399-u-boot.dtsi so-that SPL can access pmu. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21rockchip: rk3399: syscon: Add pmu supportJagan Teki
Add pmu compatible with relevant U_BOOT_DRIVER for rk3399 via syscon rk3399 driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21arm: include: rockchip: Add rk3399 pmu fileJagan Teki
Add pmu header file for rk3399 SoC, this will help to configure pmu in sdram driver. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Add LPPDR4 mr detectionJagan Teki
Like data training in other sdram types, mr detection need to taken care for lpddr4 with looped rank and associated channel to make sure the proper configuration held. Once the mr detection successful for active and configured rank with channel number, the same can later reused during actual LPDDR4 initialization. So, add code to support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Handle data training via opsJagan Teki
data training can be even required for lpddr4 and we need to keep the lpddr4 code to compile only for relevant boards which do support lpddr4. For this requirement, and for code readability handle data training via sdram_rk3399_ops and same will update in future while supporting lpddr4 code. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-21ram: rk3399: Simplify data training first argumentJagan Teki
data training is using chan_info as first argument with channel number as second argument instead of that use dram_info as first argument so-that we can get the chan_info at data training definition. This was the argument handling is meaningful, readable and it would help to add similar data training for lpddr4 in future. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 vref_mode_acJagan Teki
Update vref_mode_ac for lpddr4 based on VDDQ/3/2=16.8% Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 mode_sel based on io settingsJagan Teki
The mode_sel on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Update lpddr4 vref based on io settingsJagan Teki
The vref_mode_dq, vref_value_dq on lpddr4 value is depending on IO settings of rd_vref. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Get lpddr4 tsel_rd_en from io settingsJagan Teki
For base.odt 1 the lpddr4 tsel_rd_en value is depending on IO settings of rd_odt_en. Add support for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: rk3399: Configure soc odt supportJagan Teki
CTL 145, 146, 159, 160 registers are used to configure soc odt on rk3399. These soc odt values are updated from CS0_MR22_VAL and CS1_MR22_VAL and for lpddr4 these values ORed with tsel_rd_select_n. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
2019-07-20ram: rk3399: Add tsel control clock driveJagan Teki
tsel contrl clock drives are required to configure PHY 929, 939 controls drive settings. Add support for these control clock for all dramtype sdrams. Thse control clock drives are configure via tsel_ckcs_select_p and tsel_ckcs_select_n variables. tsel_ckcs_select_n is PHY_DRV_ODT_34_3 value where as tsel_ckcs_select_p is retrived from IO settings for lpddr4 and rest uses PHY_DRV_ODT_34_3. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com> Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>
2019-07-20ram: sdram: Configure lpddr4 tsel rd, wr based on IO settingsJagan Teki
Now we have IO settings available for all supported sdram frequencies, so retrieve these IO settings and make used for LPDDR4 ds odt configuration. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: YouMin Chen <cym@rock-chips.com>
generated by cgit (git 2.34.1) at 2024-12-24 00:15:06 +0000