summaryrefslogtreecommitdiff
path: root/CHANGELOG
AgeCommit message (Collapse)Author
2006-04-26Add Altera Nios-II boards EP1C20, EP1S10 and EP1S40Heiko Schocher
Patch from Scott McNutt, 11 Aug 2005
2006-04-20* Update PK1C20 board for Nios-II 5.0Heiko Schocher
Patch from Scott McNutt, 11 Aug 2005 -Update base addresses for standard configuration -Eliminate use of CACHE_BYPASS in board code
2006-04-20* Add EPCS Controller bootrom work-around for Nios-IIHeiko Schocher
Patch from Scott McNutt 11, Aug 2005 -When booting from an epcs controller, the epcs bootrom may leave the slave select in an asserted state causing soft reset hang. This patch ensures slave select is negated at reset.
2006-04-20Fix I/O Macros and mini-app stubs for Nios-IIHeiko Schocher
Patch by Scott McNutt 11, Aug 2005 -Fix asm/io.h macros -Eliminate use of CACHE_BYPASS in cpu code -Eliminate assembler warnings -Fix mini-app stubs and force no small data
2006-04-20Add MCF5282 support (without preloader)Heiko Schocher
relocate ichache_State to ram u-boot can run from internal flash Add EB+MCF-EV123 board support. Add m68k Boards to MAKEALL Patch from Jens Scharsig, 08 Aug 2005
2006-04-18MPC5200: enable snooping of DMA transactions on XLB even if no PCIWolfgang Denk
is configured; othrwise DMA accesses aren't cache coherent which causes for example USB to fail.
2006-04-16Some code cleanupWolfgang Denk
2006-04-16Merge with /home/hs/U-Boot/u-boot-devWolfgang Denk
2006-04-13Fix Quad UART mapping on MCC200 board due to new HW revisionWolfgang Denk
2006-04-12Merge with /home/m8/git/u-bootWolfgang Denk
2006-04-11* Fix dbau1x00 BoardHeiko Schocher
- Fix dbau1x00 boards broken by dbau1550 patch PLL:s were not set for boards other than 1550. Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. Default boot is now bootp for cards other than 1550. Patch by Thomas Lange Aug 10 2005
2006-04-11Fixes common/cmd_flash.c:Heiko Schocher
- fix some compiler/parser error, if using m68k tool chain - optical fix for protect on/off all messages, if using more then one bank Patch by Jens Scharsig, 28 July 2005
2006-04-06Update CHANGELOGWolfgang Denk
2006-04-06Merge with /home/sr/git/u-boot/cfi-flashWolfgang Denk
2006-04-05Merge with /home/sr/git/u-boot/4xx-sdramWolfgang Denk
2006-04-03Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.SWolfgang Denk
Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
2006-04-01* Add support for ymodem protocol downloadWolfgang Denk
Patch by Stefano Babic, 29 Mar 2006 * Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 Merge with /home/mk/8-benq/u-boot
2006-04-01* Changes/fixes for drivers/cfi_flash.c:Stefan Roese
- Add Intel legacy lock/unlock support to common CFI driver On some Intel flash's (e.g. Intel J3) legacy unlocking is supported, meaning that unlocking of one sector will unlock all sectors of this bank. Using this feature, unlocking of all sectors upon startup (via env var "unlock=yes") will get much faster. - Fixed problem with multiple reads of envronment variable "unlock" as pointed out by Reinhard Arlt & Anders Larsen. - Removed unwanted linefeeds from "protect" command when CFG_FLASH_PROTECTION is enabled. - Changed p3p400 board to use CFG_FLASH_PROTECTION Patch by Stefan Roese, 01 Apr 2006 * Changes/fixes for drivers/cfi_flash.c: - Correctly handle the cases where CFG_HZ != 1000 (several XScale-based boards) - Fix the timeout calculation of buffered writes (off by a factor of 1000) Patch by Anders Larsen, 31 Mar 2006
2006-03-31GCC-4.x fixes: clean up global data pointer initialization for all boards.Wolfgang Denk
2006-03-31Reorder CHANGELOGStefan Roese
2006-03-31Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)Stefan Roese
405 SDRAM: - The SDRAM parameters can now be defined in the board config file and the 405 SDRAM controller values will be calculated upon bootup (see PPChameleonEVB). When those settings are not defined in the board config file, the register setup will be as it is now, so this implementation should not break any current design using this code. Thanks to Andrea Marson from DAVE for this patch. 440 DDR: - Added function sdram_tr1_set to auto calculate the TR1 value for the DDR. - Added ECC support (see p3p440). Patch by Stefan Roese, 17 Mar 2006
2006-03-25Update CHANGELOGWolfgang Denk
2006-03-23Enable Quad UART om MCC200 board.Wolfgang Denk
2006-03-21Cleanup MCC200 board configuration; omit non-existent stuff.Wolfgang Denk
2006-03-19Update CHANGELOGWolfgang Denk
2006-03-17Merge with port of MPC8349EMDS boardWolfgang Denk
2006-03-17Add support for Lite5200B board.Wolfgang Denk
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
2006-03-16Add command for handling DDR ECC registers on MPC8349EE MDS board.Marian Balakowicz
2006-03-16Fix DDR ECC bit definitions for MPC83xx.Marian Balakowicz
2006-03-14Add initial support for MPC8349E MDS board.Marian Balakowicz
2006-03-14Add support for ECC DDR initialization on MPC83xx.Marian Balakowicz
2006-03-14Add DMA support for MPC83xx.Marian Balakowicz
2006-03-14Add sync in do_reset() routine for MPC83xx after RPR registerMarian Balakowicz
was written to. It is need on some targets when BAT translation is enabled.
2006-03-14Add bit definitions for MPC83xx DDR controller registers.Marian Balakowicz
2006-03-14Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.Marian Balakowicz
2006-03-14Correct shift offsets in icache_status and dcache_status for MPC83xx.Marian Balakowicz
2006-03-14Add support for DS1374 RTC chip.Marian Balakowicz
2006-03-13Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer andWolfgang Denk
cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories Patch by Andreas Engel, 13 Mar 2006
2006-03-13Fix CHANGELOG entry (patch date)Wolfgang Denk
2006-03-13Change max size of uncompressed uImage's to 8MByte and addStefan Roese
CFG_BOOTM_LEN to adjust this setting. As mentioned by Robin Getz on 2005-05-24 the size of uncompressed uImages was restricted to 4MBytes. This default size is now increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN in the board config file. Patch by Stefan Roese, 13 Mar 2006
2006-03-13Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.cStefan Roese
Patch by Stefan Roese, 13 Mar 2006
2006-03-13cpu/ppc4xx/start.S : exceptions are enabled after relocationStefan Roese
Patch by Cedric Vincent, 6 June 2005
2006-03-13au1x00_eth.c: check malloc return value and abort if it failedWolfgang Denk
Patch by Andrew Dyer, 26 Jul 2005
2006-03-13Change the sequence of events in soft_i2c.c:send_ack() to keep fromWolfgang Denk
incorrectly generating start/stop conditions on the bus. Patch by Andrew Dyer, 26 Jul 2005
2006-03-13Fix bug in [id]cache_status commands for MPC85xx processors;Wolfgang Denk
should look at LSB of L1CSRn registers to determine if L1 cache is enabled, not the MSB. Patch by Murray Jensen, 19 Jul 2005
2006-03-12Fix array overflow with fw_setenv on uninitialised environmentWolfgang Denk
Patch by Murray Jensen, 15 Jul 2005
2006-03-12Add support for EmbeddedPlanet EP88x boardsWolfgang Denk
Patch by Yuli Barcohen, 13 Jul 2005
2006-03-12Remove board specific configuration includes from the common xilinxWolfgang Denk
ethernet and iic adapter code. Patch by Michael Libeskind, 12 Jul 2005
2006-03-12Add Nat Semi DP83865 PHY support to MPC85xx TSEC driverWolfgang Denk
Patch by Murray Jensen, 08 Jul 2005
2006-03-12Add (some) definitions for the MPC85xx local bus controllerWolfgang Denk
Patch by Murray Jensen, 08 Jul 2005
generated by cgit (git 2.34.1) at 2024-12-27 04:49:11 +0000