summaryrefslogtreecommitdiff
path: root/CHANGELOG
AgeCommit message (Collapse)Author
2006-01-23Merge branch 'mpc83xx'Kumar Gala
2006-01-23Fixed defines for MPC83xx SICRL register to match current specsKumar Gala
Patch by Kumar Gala, 23 Jan 2006
2006-01-12Merge branch 'mpc8349ads'Kumar Gala
2006-01-12Added PCI support for MPC8349ADS boardKumar Gala
Patch by Kumar Gala 11 Jan 2006
2006-01-12Merge branch 'mpc8349ads'Kumar Gala
2006-01-12Merge branch 'pci'Kumar Gala
2006-01-12Added PCI support for MPC8349ADS boardKumar Gala
Patch by Kumar Gala 11 Jan 2006
2006-01-12Fixed PCI indirect config ops to handle multiple PCI controllersKumar Gala
We need to adjust the bus number we are trying to access based on which PCI controller its on Patch by Kumar Gala 12 Jan 2006
2006-01-11Merge branch 'mpc8349ads'Kumar Gala
2006-01-11Added PCI support for MPC8349ADS boardKumar Gala
Patch by Kumar Gala 11 Jan 2006
2006-01-11Merge branch 'ft_infr'Kumar Gala
2006-01-11Merge branch 'pci'Kumar Gala
2006-01-11Add helper function for generic flat device tree fixups for mpc83xxKumar Gala
Patch by Kumar Gala 11 Jan 2006
2006-01-11Add support for passing initrd information via flat device treeKumar Gala
Patch by Kumar Gala 11 Jan 2006
2006-01-11Added OF_STDOUT_PATH and OF_SOCKumar Gala
OF_STDOUT_PATH specifies the path to the device the kernel can use for console output OF_SOC specifies the proper name of the SOC node if one exists. Patch by Kumar Gala 11 Jan 2006
2006-01-11Allow board code to fixup the flat device tree before booting aKumar Gala
kernel Patch by Kumar Gala 11 Jan 2006
2006-01-11Added CONFIG_ options for bd_t and env in flat dev treeKumar Gala
CONFIG_OF_HAS_BD_T will put a copy of the bd_t into the resulting flat device tree. CONFIG_OF_HAS_UBOOT_ENV will copy the environment variables from u-boot into the flat device tree Patch by Kumar Gala 11 Jan 2006
2006-01-11Report back PCI bus when doing table based device configKumar Gala
Patch by Kumar Gala 11 Jan 2006
2006-01-11Added support for PCI prefetchable region and BARsKumar Gala
If a host controller sets up a region as prefetchable and a device's BAR denotes it as prefetchable, allocate the BAR into the prefetch region. If a BAR is prefetchable and no prefetchable region has been setup by the controller we fall back to allocating the BAR into the normally memory region. Patch by Kumar Gala 11 Jan 2006
2006-01-11Only disable the MPC83xx watchdog if its enabled out of reset.Kumar Gala
If its disabled out of reset SW can later enable it if so desired Patch by Kumar Gala, 11 Jan 2006
2006-01-11Allow config of GPIO direction & data registers at boot on 83xxKumar Gala
Patch by Kumar Gala, 11 Jan 2006
2006-01-11Enable time handling on 83xxKumar Gala
Patch by Kumar Gala, 11 Jan 2006
2006-01-11Make System IO Config Registers board configurable on MPC83xxKumar Gala
Patch by Kumar Gala, 11 Jan 2006
2005-12-29Add support for 28F256J3A flah (=> 64 MB) on PM520 boardWolfgang Denk
2005-12-19Fix compiler problem with at91rm9200dk board.Wolfgang Denk
Patch by Eugen Bigz, 19 Dec 2005
2005-12-16Merge with /home/sr/git/u-bootWolfgang Denk
2005-12-16MPC5200: Set PCI retry counter to 0 = infinite retry;Wolfgang Denk
The default of 255 is too short for slow devices. Patch by Martin Nykodym, 12 Dec 2005
2005-12-15Changes to Yellowstone & Yosemite 440EP/GR eval boards:Stefan Roese
- Changed GPIO setup to enable another address line in order to address 64M of FLASH. - Added function sdram_tr1_set to auto calculate the tr1 value for the DDR. Patch by Steven Blakeslee, 12 Dec 2005
2005-12-14Merge with /home/m8/git/u-bootWolfgang Denk
2005-12-12(no commit message)Wolfgang Denk
2005-12-06Change port configuration for O2DNT (CODEC1 on PSC1)Marian Balakowicz
2005-12-06Fix DPRAM offset/size for MPC8541/8555.Wolfgang Denk
Simplify TQM85xx Makefile handling.
2005-12-04Fix data overflow (typo?) in rtc/ds1302.cWolfgang Denk
2005-12-04Code cleanup, especially MIPS for GCC 4.xWolfgang Denk
2005-12-01Fix U-Boot compilation for MIPS boards using ELDK 4.0Wolfgang Denk
2005-12-01Merge with /home/sr/git/u-bootWolfgang Denk
2005-12-01Adjust TQM834x PHY addresses for latest hardware revision.Wolfgang Denk
2005-12-01Increase malloc arena on TQM5200 board to 256 kB.Wolfgang Denk
With 64 kb uniform flash sector size the old value of 128 kB was too small.
2005-11-30Fix miiphy global data initialization (problem on 4xx boards when noMarian Balakowicz
ethaddr is assigned). Initialization moved from miiphy_register() to eth_initialize(). Based on initial patch for 4xx platform by Matthias Fuchs.
2005-11-30Add support for TQM8541/8555 boards, TQM85xx support reworked:Stefan Roese
- Support for TQM8541/8555 boards added. - Complete rework of TQM8540/8560 support. - Common TQM85xx code now supports all current TQM85xx platforms (TQM8540/8541/8555/8560). - DDR SDRAM size detection added. - CAS latency default values can be overwritten by setting "serial#" to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used. If problems are detected with this non default CAS latency, the defualt values will be used instead. - FLASH size detection added. - Moved FCC ethernet driver initialization behind TSEC driver init -> TSEC is first device. Patch by Stefan Roese, 30 Nov 2005
2005-11-29Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.Stefan Roese
Patch by John Otken, 23 Nov 2005
2005-11-27Changed PPC44x startup message (cpu info, speed...) to common style:Stefan Roese
On PPC44x platforms, the startup message generated in "cpu.c" only comprised the ppc type and revision but not additional informations like speed etc. Those speed infos where printed in the board specific code. This new implementation now prints all CPU infos in the common cpu specific code. No board specific code is needed anymore and therefore removed from all current 44x implementations. Patch by Stefan Roese, 27 Nov 2005
2005-11-25Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.hWolfgang Denk
2005-11-25Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.Wolfgang Denk
The COPYING file was extended to make clear that these files can be used in non-GPL code, too.
2005-11-22Add support for Prodrive P3P440 board:Stefan Roese
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c - CFG_FLASH_QUIET_TEST added to use the common CFI driver for bank autodetection Patch by Stefan Roese, 22 Nov 2005
2005-11-20Change all '$(...)' variable references into '${...}'Wolfgang Denk
which makes the environment compatible with the hush shell. WARNING: Support for the old '$(...)' syntax will be discontinued in a later version.
2005-11-17Minor changes to init flags in TQM834x PCI.Rafal Jaworowski
2005-11-15Add CHANGELOG entryStefan Roese
Patch by Stefan Roese, 15 Nov 2005
2005-11-15New PPC 405EP board added: CMS700Stefan Roese
Added CONFIG_NET_MULTI for VOM405 board. Added reset_phy() for VOM405 board. Patch by Matthias Fuchs, 09 Nov 2005
2005-11-08Updated PCI mapping for esd CPCI2DP board.Stefan Roese
Add support for error LED. Patch by Matthias Fuchs, 07 Nov 2005
generated by cgit (git 2.34.1) at 2025-01-19 03:06:47 +0000