summaryrefslogtreecommitdiff
path: root/CHANGELOG
AgeCommit message (Collapse)Author
2006-10-20Merge with /home/sr/git/u-boot/440epx-boot-msgWolfgang Denk
2006-10-18Update CHANGELOGWolfgang Denk
2006-10-18Make 4xx bootup message shorter on 440EPx/GRx platformsStefan Roese
Patch by Stefan Roese, 18 Oct 2006
2006-10-17Add monitor functions for indirect access to PPC440 DCR'sStefan Roese
Patch by Leonid Baryudin, 12 Oct 2006
2006-10-12* PPC405EP: Add support for board configuration of CPC0_PCI registerStefan Roese
This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE* Patch by Tolunay Orkun, 07 Apr 2006
2006-10-12* PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely.Stefan Roese
- Add configuration of Open Drain GPIO Output selection - Add configuration of initial value of GPIO output pins Patch by Tolunay Orkun, 07 Apr 2006
2006-10-12Fix spelling; minor code cleanup.Wolfgang Denk
2006-10-12Fix JFFS2 compilation problemStefan Roese
Patch by Stefan Roese, 12 Oct 2006
2006-10-11Cleanup of NAND update patch (remove changelog from cmd_nand.c)Stefan Roese
Patch by Guido Classen, 10 Oct 2006
2006-10-10* Several improvements to the new NAND subsystem:Stefan Roese
- JFFS2 related commands implemented in mtd-utils style - Support for bad blocks - Bad block testing commands - NAND lock commands Please take a look at doc/README.nand for more details Patch by Guido Classen, 10 Oct 2006
2006-10-09Merge with /home/sr/git/u-boot/avr32Wolfgang Denk
2006-10-09Define IH_CPU_AVR32Stefan Roese
Make it possible to generate AVR32 uImage files with mkimage and make cmd_bootm recognize them. Patch by Haavard Skinnemoen, 22 Sep 2006
2006-10-09Fix buffer overflow problem in ft_build.cWolfgang Denk
Patch by Fredrik Roubert, 09 Oct 2006
2006-10-09Make bootp implementation RFC3046 compliantWolfgang Denk
Patch by Joakim Larsson, 27 Jun 2006
2006-10-09TQM5200: perform POST memory test only on STK52xx carrier board.Wolfgang Denk
(and then only if PSC6_3 is read as "1" when booting). Patch by Martin Krause, 21 Jun 2006
2006-10-09Move "ar" flags to config.mk to allow for silent "make -s"Wolfgang Denk
Based on patch by Mike Frysinger, 20 Jun 2006
2006-10-09Coding style cleanupWolfgang Denk
2006-10-09Add support for EP82xxM boardsWolfgang Denk
Patch by Aaron Sells, 20 Jun 2006
2006-10-08Merge with git+ssh://fifi/home/wd/git/u-boot/masterWolfgang Denk
2006-10-07CFG_NAND_QUIET_TEST added to not warn upon missing NAND deviceStefan Roese
Patch by Stefan Roese, 07 Oct 2006
2006-10-07Update ALPR code (NAND support working now)Stefan Roese
Patch by Stefan Roese, 07 Oct 2006
2006-10-07Remove compile warnings in fpga codeStefan Roese
Patch by Stefan Roese, 07 Oct 2006
2006-10-07Add CONFIG_BOARD_RESET to configure board specific reset functionStefan Roese
Patch by Stefan Roese, 07 Oct 2006
2006-10-05Merge with /home/m8/git/u-bootWolfgang Denk
2006-10-04Fix TLB setup for Ocotea boardStefan Roese
Patch by Stefan Roese, 30 Sep 2006
2006-10-04Fix reset problem in sequoia sdram init codeStefan Roese
Patch by Stefan Roese, 23 Sep 2006
2006-10-03Update for CAM5200 board:Marian Balakowicz
- Map in a additional chip selects CS4 and CS5. - Modify the port configration, configure six UARTs and no PCI, ATA and USB. - Add custom flash driver to handle specific byte swapping
2006-09-20Fix comments in include/ppc440.hWolfgang Denk
Patch by Martin Hicks, 16 Jun 2006
2006-09-18Merge with /home/stefan/git/u-boot/denxStefan Roese
2006-09-13Add support for AMCC Rainier PPX440GRx eval boardStefan Roese
Patch by Stefan Roese, 13 Sep 2006
2006-09-13Disable autoboot abort for FO300 when silent mode is enabledWolfgang Denk
(according to S1 switch setting). Patch by Marian Balakowicz, 12 Sep 2006
2006-09-13Cleanup examples binariesWolfgang Denk
2006-09-13Merge with /home/sr/git/u-boot/denxWolfgang Denk
2006-09-13Fix alignment problem in "mtdparts" commandWolfgang Denk
2006-09-12Add NAND environment support for PPC440EPx Sequoia NAND boot configStefan Roese
Patch by Stefan Roese, 12 Sep 2006
2006-09-12Update NAND boot documentationStefan Roese
Patch by Stefan Roese, 12 Sep 2006
2006-09-09Merge with /home/m8/git/u-bootWolfgang Denk
2006-09-07Add documentation on the latest build environment extentions toMarian Balakowicz
the README file.
2006-09-07Fix build problem cpu/ppc4xx/ndfc.cStefan Roese
Patch by Stefan Roese, 07 Sep 2006
2006-09-07Fix build problem with CPCI440Stefan Roese
Patch by Stefan Roese, 07 Sep 2006
2006-09-07Change Yellowstone to use CFI write bufferStefan Roese
Patch by Stefan Roese, 07 Aug 2006
2006-09-07Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory.Marian Balakowicz
2006-09-07Fix LOG_DIR directory creation error.Marian Balakowicz
Add support for automatic creation of BUILD_DIR directory.
2006-09-07Add support for AMCC Sequoia PPC440EPx eval boardStefan Roese
- Add support for PPC440EPx & PPC440GRx - Add support for PPC440EP(x)/GR(x) NAND controller in cpu/ppc4xx directory - Add NAND boot functionality for Sequoia board, please see doc/README.nand-boot-ppc440 for details - This Sequoia NAND image doesn't support environment in NAND for now. This will be added in a short while. Patch by Stefan Roese, 07 Sep 2006
2006-09-06Fix mkimage -l bug with multifile images on 64bit platformsWolfgang Denk
Patch by David Updegraff, 06 Sep 2006
2006-09-04Fix build problems on sorcery board.Wolfgang Denk
2006-09-04Merge with /home/m8/git/u-bootWolfgang Denk
2006-09-03Fixed problems on PRS200 board caused by adding splash screen on MCC200Wolfgang Denk
2006-09-03Merge with /home/wd/git/u-boot/masterWolfgang Denk
2006-09-01Add support for a saving build objects in a separate directory.Marian Balakowicz
Modifications are based on the linux kernel approach and support two use cases: 1) Add O= to the make command line 'make O=/tmp/build all' 2) Set environement variable BUILD_DIR to point to the desired location 'export BUILD_DIR=/tmp/build' 'make' The second approach can also be used with a MAKEALL script 'export BUILD_DIR=/tmp/build' './MAKEALL' Command line 'O=' setting overrides BUILD_DIR environent variable. When none of the above methods is used the local build is performed and the object files are placed in the source directory.
generated by cgit (git 2.34.1) at 2025-01-04 03:27:41 +0000