summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2018-12-19MSCC: add board support for the Luton based evaluation boardGregory CLEMENT
Adding the support for the Luton boards PCB91 which share common code with the Ocelots boards, including board code, device tree and configuration. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add board support for the Ocelots based evaluation boardsGregory CLEMENT
Adding the support for 2 boards sharing common code for Ocelot chip: PCB120 and PCB123 Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-19MSCC: add support for Ocelot SoCsGregory CLEMENT
This family of SoCs are found in the Microsemi Switches solution and have already a support in the linux kernel. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-15tools: add a generic config for native tools buildingOtavio Salvador
The motivation for this is to allow distributions to distribute all possible tools in a generic way, avoiding the need of specific tools building for each machine. Especially on OpenEmbedded / Yocto Project ecosystem, it is very common each BSP to end providing their specific tools when they need to generate images for some SoC (e.g MX23 / MX28 in meta-freescale case). Using this, we can package the tools doing: $: make tools-only_defconfig $: make tools-only Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> [trini: Add MAINTAINERS entry for myself, add to .travis.yml, make U-Boot itself buildable to not trip up other frameworks] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-12-05binman: Add myself as maintainerSimon Glass
Add an entry for my maintainership of this tool. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-12-02MAINTAINERS: add EFI PAYLOAD reviewerHeinrich Schuchardt
Alex suggested to add me as a reviewer for the EFI subsystem. The patch also adds a description for R: entries. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-11-28MAINTAINERS: add an entry for MediaTekRyder Lee
This patch adds an entry for MediaTek. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-09MAINTAINERS: Update stm32mp entryPatrick Delaunay
Add mailing list for stm32mp architecture and board. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-11-06MAINTAINERS: add NXP linux team maillist as i.MX reviewerPeng Fan
Add NXP linux team upstream maillist as reviewer Signed-off-by: Peng Fan <peng.fan@nxp.com>
2018-10-16Merge git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.11-rc2-v2 FPGA: - Fix SPL fpga loading from FIT ARM64: - Fix gic accesses in EL2/EL1 Xilinx: - Add dlc20 board support - Add Versal board support - Sync defconfigs - Enable MP via Kconfig - Add missing efuse node - Enable CDC for zcu100 cmd: - Fix kgdb Kconfig dependency
2018-10-16arm64: versal: Add support for new Xilinx Versal ACAPsMichal Simek
Xilinx is introducing Versal, an adaptive compute acceleration platform (ACAP), built on 7nm FinFET process technology. Versal ACAPs combine Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent Engines with leading-edge memory and interfacing technologies to deliver powerful heterogeneous acceleration for any application. The Versal AI Core series has five devices, offering 128 to 400 AI Engines. The series includes dual-core Arm Cortex™-A72 application processors, dual-core Arm Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more than 1,900 DSP engines optimized for high-precision floating point with low latency. The patch is adding necessary infrastructure in place without enabling platform which is done in separate patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-12i2c: fix: Add support for the Arm's Versatile Express I2C controllerHeiko Schocher
accidentially while fixing merge errors for patch: https://lists.denx.de/pipermail/u-boot/2018-September/342278.html missed to add files: MAINTAINERS drivers/i2c/Kconfig drivers/i2c/Makefile add them with this patch. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-10-07tee: optee: support AVB trusted applicationJens Wiklander
Adds configuration option OPTEE_TA_AVB and a header file describing the interface to the Android Verified Boot 2.0 (AVB) trusted application provided by OP-TEE. Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07Add UCLASS_TEE for Trusted Execution EnvironmentJens Wiklander
Adds a uclass to interface with a TEE (Trusted Execution Environment). A TEE driver is a driver that interfaces with a trusted OS running in some secure environment, for example, TrustZone on ARM cpus, or a separate secure co-processor etc. The TEE subsystem can serve a TEE driver for a Global Platform compliant TEE, but it's not limited to only Global Platform TEEs. The over all design is based on the TEE subsystem in the Linux kernel, tailored for U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Igor Opaniuk <igor.opaniuk@linaro.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-06misc: Add support for the Arm Versatile Express config busLiviu Dudau
Add support for the Arm Versatile Express config bus that is being used for exposing various subsystems via a generic configuration bus. This driver adds support for generating transactions on this configuration bus and can be used by other drivers to abstract the communication with the actual function providers. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2018-10-02Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
This is the PR for SPI-NAND changes along with few spi changes. [trini: Re-sync changes for ls1012afrwy_qspi*_defconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-30phy: db410c: Add MSM USB PHY driverRamon Fried
Add a PHY driver for the Qualcomm dragonboard 410c which allows switching on/off and resetting the phy connected to the EHCI controllers and USBHS controller. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-28video: Add support for Arm's Mali Display ProcessorsLiviu Dudau
Add support for Arm Mali Display Processors DP500, DP550 and DP650. Only one layer is being used to display the console or boot logo, even if more layers are supported in the hardware. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28video: Add support for NXP's TDA19988 HDMI encoderLiviu Dudau
Add support for the NXP TDA19988 HDMI encoder as used on the Juno development board from Arm. Signed-off-by: Liviu Dudau <liviu.dudau@foss.arm.com>
2018-09-28MAINTAINERS: assign include/video*.hHeinrich Schuchardt
The include/video*.h files are part of the drivers in drivers/video. So it makes sense to assign them to the same maintainer. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-23efi_loader: EFI_UNICODE_COLLATION_PROTOCOLHeinrich Schuchardt
The patch implements the EFI_UNICODE_COLLATION_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: capitalization tableHeinrich Schuchardt
This patch provides a define to initialize a table that maps lower to capital letters for Unicode code point 0x0000 - 0xffff. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23test: unit tests for Unicode functionsHeinrich Schuchardt
Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-20mtd: move NAND files into a raw/ subdirectoryMiquel Raynal
NAND flavors, like serial and parallel, have a lot in common and would benefit to share code. Let's move raw (parallel) NAND specific code in a raw/ subdirectory, to ease the addition of a core file in nand/ and the introduction of a spi/ subdirectory specific to SPI NANDs. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-09-19Merge git://git.denx.de/u-boot-marvellTom Rini
- Multiples updates to the turris boards / platform - Changes / enhancements to the Marvell PHY drivers, mainly to support the turris platform - Many fixes and enhancements to the pxa3xx NAND driver - Fixes for the UART boot mode in kwboot - Misc minor changes to other 32bit and 64bit boards
2018-09-19phy: marvell: Support changing SERDES map in board fileMarek Behún
This adds a weak definition of comphy_update_map to comphy_core, which does nothing. If this function is defined elsewhere, for example in board file, the board file can change some parameters of SERDES configuration. This is needed on Turris Mox, where the SERDES speed on lane 1 has to be set differently when SFP module is connected and when Topaz Switch module is connected. This is a temporary solution. When the comphy driver for armada-3720 will be added to the kernel, the comphy driver in u-boot shall also be updated and this should be done differently then. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-18misc: Add MPC83xx serdes driverMario Six
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18cpu: Add MPC83xx CPU driverMario Six
Add a CPU driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18timer: Add MPC83xx timer driverMario Six
Add a timer driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18clk: Add MPC83xx clock driverMario Six
Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18mpc83xx: Add sysreset driverMario Six
Add a sysreset driver for the MPC83xx platform. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18ram: Add driver for MPC83xxMario Six
Add a RAM driver for the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-11Merge tag 'fpga-for-v2018.11' of git://git.denx.de/u-boot-microblazeTom Rini
FPGA changes for v2018.11 - add fpga tests to cover fpga commands - fpga Kconfig cleanup - fix cmd/fpga.c - add support for missing fpga loadmk commands - add fpga fragment to MAINTAINERS
2018-09-11arm: K3: Add initial support for TI's K3 generation of SoCsLokesh Vutla
Add support for Texas Instruments' K3 Generation Processor families. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-09-11MAINTAINERS: Add myself as the FPGA maintainerMichal Simek
FPGA subsystem requires special care that's why it should be maintained via one tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-10board: arm: Add support for Broadcom BCM7260Thomas Fitzsimmons
Add support for loading U-Boot on the Broadcom 7260 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-08-13MAINTAINERS: Update STM32MP fragmentsPatrice Chotard
Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13MAINTAINERS: Add more sources to Arch SnapdragonRamon Fried
Add scattered driver files around the source tree that belongs to Snapdragon arch. Not sure why they were not included in the first place. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-10doc: add structure to Sphinx generated docsHeinrich Schuchardt
Create separate html pages for linker lists, the serial subsystem, and the EFI subsystem. Add a table of content. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-31CREG GPIO: add device tree bindingsEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-30Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-07-25 Highlights this time: - Many small fixes to improve spec compatibility (found by SCT) - Almost enough to run with sandbox target - GetTime() improvements - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-26MAINTAINERS: Mark NAND as OrphanedTom Rini
Scott is no longer maintaining the NAND subsystem, mark as orphaned for now. Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-25MAINTAINERS: assign lib/charset.cHeinrich Schuchardt
lib/charset.c is only used by the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-19soc: qualcomm: Add Shared Memory Manager driverRamon Fried
The Shared Memory Manager driver implements an interface for allocating and accessing items in the memory area shared among all of the processors in a Qualcomm platform. Adapted from the Linux driver (4.17) Changes from the original Linux driver: * Removed HW spinlock mechanism, which is irrelevant in U-boot particualar use case, which is just reading from the smem. * Adapted from Linux driver model to U-Boot's. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19sysreset: Add support for gpio-restartMichal Simek
The Linux kernel has binding for gpio-restart node. This patch is adding basic support without supporting any optional properties. This driver was tested on Microblaze system where gpio is connected to SoC reset logic. Output value is handled via gpios cells values. In gpio_reboot_request() set_value is writing 1 because dm_gpio_set_value() is capable to changing it when it is ACTIVE_LOW. ... if (desc->flags & GPIOD_ACTIVE_LOW) value = !value; ... Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-10board: arm: Add support for Broadcom BCM7445Thomas Fitzsimmons
Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-07-09MAINTAINERS: Add entries for Actions Semi OWL familyManivannan Sadhasivam
Add myself as the Maintainer for Actions Semi OWL family and its relevant board, drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-06-18MAINTAINERS: update ARM SnapdragonRamon Fried
Replace Mateusz as Maintainer for ARM Snapdragon arch. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2018-06-03efi_loader: DocBook comments for boot servicesHeinrich Schuchardt
With 'make htmldocs' we can generate a documentation if the function comments follow the DocBook conventions. This patch adjusts the comments for EFI boot services and provides the DocBook template for the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit (git 2.34.1) at 2024-12-26 20:53:57 +0000