summaryrefslogtreecommitdiff
path: root/MAINTAINERS
AgeCommit message (Collapse)Author
2018-09-23efi_loader: EFI_UNICODE_COLLATION_PROTOCOLHeinrich Schuchardt
The patch implements the EFI_UNICODE_COLLATION_PROTOCOL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23efi_loader: capitalization tableHeinrich Schuchardt
This patch provides a define to initialize a table that maps lower to capital letters for Unicode code point 0x0000 - 0xffff. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-23test: unit tests for Unicode functionsHeinrich Schuchardt
Provide unit tests for Unicode functions. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-09-19Merge git://git.denx.de/u-boot-marvellTom Rini
- Multiples updates to the turris boards / platform - Changes / enhancements to the Marvell PHY drivers, mainly to support the turris platform - Many fixes and enhancements to the pxa3xx NAND driver - Fixes for the UART boot mode in kwboot - Misc minor changes to other 32bit and 64bit boards
2018-09-19phy: marvell: Support changing SERDES map in board fileMarek Behún
This adds a weak definition of comphy_update_map to comphy_core, which does nothing. If this function is defined elsewhere, for example in board file, the board file can change some parameters of SERDES configuration. This is needed on Turris Mox, where the SERDES speed on lane 1 has to be set differently when SFP module is connected and when Topaz Switch module is connected. This is a temporary solution. When the comphy driver for armada-3720 will be added to the kernel, the comphy driver in u-boot shall also be updated and this should be done differently then. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-18misc: Add MPC83xx serdes driverMario Six
Add a driver to configure the SerDes (Serializer/Deserializer) lanes on the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18cpu: Add MPC83xx CPU driverMario Six
Add a CPU driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18timer: Add MPC83xx timer driverMario Six
Add a timer driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18clk: Add MPC83xx clock driverMario Six
Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18mpc83xx: Add sysreset driverMario Six
Add a sysreset driver for the MPC83xx platform. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-18ram: Add driver for MPC83xxMario Six
Add a RAM driver for the MPC83xx architecture. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-09-11Merge tag 'fpga-for-v2018.11' of git://git.denx.de/u-boot-microblazeTom Rini
FPGA changes for v2018.11 - add fpga tests to cover fpga commands - fpga Kconfig cleanup - fix cmd/fpga.c - add support for missing fpga loadmk commands - add fpga fragment to MAINTAINERS
2018-09-11arm: K3: Add initial support for TI's K3 generation of SoCsLokesh Vutla
Add support for Texas Instruments' K3 Generation Processor families. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-09-11MAINTAINERS: Add myself as the FPGA maintainerMichal Simek
FPGA subsystem requires special care that's why it should be maintained via one tree. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-09-10board: arm: Add support for Broadcom BCM7260Thomas Fitzsimmons
Add support for loading U-Boot on the Broadcom 7260 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-08-13MAINTAINERS: Update STM32MP fragmentsPatrice Chotard
Add new drivers Add Christophe Kerello and myself as maintainers Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-13MAINTAINERS: Add more sources to Arch SnapdragonRamon Fried
Add scattered driver files around the source tree that belongs to Snapdragon arch. Not sure why they were not included in the first place. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-08-10doc: add structure to Sphinx generated docsHeinrich Schuchardt
Create separate html pages for linker lists, the serial subsystem, and the EFI subsystem. Add a table of content. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-31CREG GPIO: add device tree bindingsEugeniy Paltsev
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-07-30Merge tag 'signed-efi-next' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-07-25 Highlights this time: - Many small fixes to improve spec compatibility (found by SCT) - Almost enough to run with sandbox target - GetTime() improvements - Enable EFI_LOADER and HYP entry on ARMv7 with NONSEC=y
2018-07-26MAINTAINERS: Mark NAND as OrphanedTom Rini
Scott is no longer maintaining the NAND subsystem, mark as orphaned for now. Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-25MAINTAINERS: assign lib/charset.cHeinrich Schuchardt
lib/charset.c is only used by the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-07-19soc: qualcomm: Add Shared Memory Manager driverRamon Fried
The Shared Memory Manager driver implements an interface for allocating and accessing items in the memory area shared among all of the processors in a Qualcomm platform. Adapted from the Linux driver (4.17) Changes from the original Linux driver: * Removed HW spinlock mechanism, which is irrelevant in U-boot particualar use case, which is just reading from the smem. * Adapted from Linux driver model to U-Boot's. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19sysreset: Add support for gpio-restartMichal Simek
The Linux kernel has binding for gpio-restart node. This patch is adding basic support without supporting any optional properties. This driver was tested on Microblaze system where gpio is connected to SoC reset logic. Output value is handled via gpios cells values. In gpio_reboot_request() set_value is writing 1 because dm_gpio_set_value() is capable to changing it when it is ACTIVE_LOW. ... if (desc->flags & GPIOD_ACTIVE_LOW) value = !value; ... Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-10board: arm: Add support for Broadcom BCM7445Thomas Fitzsimmons
Add support for loading U-Boot on the Broadcom 7445 SoC. This port assumes Broadcom's BOLT bootloader is acting as the second stage bootloader, and U-Boot is acting as the third stage bootloader, loaded as an ELF program by BOLT. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Cc: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Florian Fainelli <f.fainelli@gmail.com>
2018-07-09MAINTAINERS: Add entries for Actions Semi OWL familyManivannan Sadhasivam
Add myself as the Maintainer for Actions Semi OWL family and its relevant board, drivers. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-06-18MAINTAINERS: update ARM SnapdragonRamon Fried
Replace Mateusz as Maintainer for ARM Snapdragon arch. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Acked-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
2018-06-03efi_loader: DocBook comments for boot servicesHeinrich Schuchardt
With 'make htmldocs' we can generate a documentation if the function comments follow the DocBook conventions. This patch adjusts the comments for EFI boot services and provides the DocBook template for the EFI subsystem. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-05-31Merge tag 'arc-updates-for-2018.07-rc1' of git://git.denx.de/u-boot-arcTom Rini
Here we do a couple of minor fixes like: - Move .ivt section to the very beginning of the image by default which allows us to use that image put right at reset vector (usually 0x0) - Improve relocation fix-up which became required once we moved .ivt and understood a problem with existing implementation where we relied on a particular placement of sections. Now we don't care about placement because we just explicitly check for .text and in case of ARCompact .ivt sections - Re-implemnt do_reset() such that it calls reset_cpu() which could implmented for a particular board And hte most important part we introduce support for yet another devboard from Synopsys - EMDK.
2018-05-31MAINTAINERS: Add board/synopsys/Alexey Brodkin
As of today 'board/synopsys/' folder contains only Synopsys ARC boards supported by the same people who support 'arch/arc'. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-05-29ata: mvebu: move mvebu sata driver to drivers/ata directoryKen Ma
Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this patch moves it to drivers/ata directory with renaming "sata.c" to "ahci_mvebu.c" which is aligned to Linux. New ahci driver's kconfig option is added as AHCI_MVEBU which selects SCSI_AHCI and is based on AHCI. Signed-off-by: Ken Ma <make@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
2018-05-26stm32mp1: add FUSE command supportPatrick Delaunay
Add support of fuse command (read/write/program/sense) on bank 0 to access to BSEC SAFMEM (4096 OTP bits). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-05-11arm: zynqmp: Add ZynqMP minimal R5 supportMichal Simek
Xilinx ZynqMP also contains dual Cortex R5 which can run U-Boot. This patch is adding minimal support to get U-Boot boot. U-Boot on R5 runs out of DDR with default configuration that's why DDR needs to be partitioned if there is something else running on arm64. Console is done via Cadence uart driver and the first Cadence Triple Timer Counter is used for time. This configuration with uart1 was tested on zcu100-revC. U-Boot 2018.05-rc2-00021-gd058a08d907d (Apr 18 2018 - 14:11:27 +0200) Model: Xilinx ZynqMP R5 DRAM: 512 MiB WARNING: Caches not enabled MMC: In: serial@ff010000 Out: serial@ff010000 Err: serial@ff010000 Net: Net Initialization Skipped No ethernet found. ZynqMP r5> There are two ways how to run this on ZynqMP. 1. Run from ZynqMP arm64 tftpb 20000000 u-boot-r5.elf setenv autostart no && bootelf -p 20000000 cpu 4 disable && cpu 4 release 10000000 lockstep or cpu 4 disable && cpu 4 release 10000000 split 2. Load via jtag when directly to R5 Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11MAINTAINERS: Declare tools/zynqmp* as Xilinx maintainedAlexander Graf
The zynqmpimage.c and the new zynqmpbif.c files are all maintained by Xilinx for the Zynq platforms. Let's match them accordingly in the MAINTAINERS file. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11MAINTAINERS: zynqmp: Point to proper zynqmp folderMichal Simek
Point to Zynqmp arm64 cpu folder not to Zynq arm32. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-11timer: Add Cadence TTC timer counter supportMichal Simek
This driver was tested on Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-01MAINTAINERS: Switch nxp.com domainFabio Estevam
freescale.com domain is no longer reachable, so switch the maintainers' emails to nxp.com domain instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-04-17ARC: Update ARC architecture maintainersEugeniy Paltsev
Update ARC architecture maintainers and add uboot-snps-arc@synopsys.com mailing list. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2018-04-10MAINTAINERS: ARM STM STM32MP: correct file pathsHeinrich Schuchardt
Provide correct file paths. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-04-09Merge tag 'xilinx-for-v2018.05-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.05-rc2 - Various DT changes and sync with mainline kernel - Various defconfig updates - Add SPL init for zcu102 revA - Add new zynqmp boards zcu100/zcu104/zcu106/zcu111/zc12XX and zc1751-dc3 - Net fixes - xlnx,phy-type - 64bit axi ethernet support - arasan: Fix nand write issue - fpga fixes - Maintainer file updates
2018-04-09MAINTAINERS: ZYNQMP: correct entriesHeinrich Schuchardt
Replace references to non-existent file. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-09MAINTAINERS: Fix zynqmp clock driver pathMichal Simek
Fix c&p error from Zynq. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-04-04efi_loader: provide new doc/README.uefiHeinrich Schuchardt
Provides information about - usage of the bootefi command - overview of UEFI - interaction between U-Boot and EFI drivers Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> Acked-by: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-03-28rockchip: mmc: update MAINTAINERSPhilipp Tomsich
The Rockchip-specific wrappers to the DW-MMC and the SDHCI driver were not covered as part of what's maintained by the architecture maintainers. Add them here. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-03-23MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragmentsMichal Simek
Fix my fragments to list all files in the repo. Also fix path to for Xilinx Zynq SoC (mach-zynq) It should be the part of "ARM: zynq: move SoC sources to mach-zynq" (sha1: 0107f2403669f764ab726d0d404e35bb9447bbcc) And cover dts files in board MAINTAINERS files. Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-03-19MAINTAINERS: Remove unused ppc4xx entryStefan Roese
ppc4xx support was removed some time ago. Lets remove the now unused entry in MAINTAINERS as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-03-19clk: add driver for stm32mp1Patrick Delaunay
add RCC clock driver for STMP32MP157 - base on driver model = UCLASS_CLK - support ops to enable, disable and get rate of all SOC clock needed by U-Boot Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19ram: stm32mp1: add driverPatrick Delaunay
Add driver and binding for stm32mp1 ddr controller and phy Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19arm: stm32: add new architecture for STM32MP familyPatrick Delaunay
- add new arch stm32mp for STM32 MPU/Soc based on Cortex A - support for stm32mp157 SOC - SPL is used as first boot stage loader - using driver model for all the drivers, even in SPL - all security feature are deactivated (ETZC and TZC) - reused STM32 MCU drivers when it is possible Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2024-12-27 13:10:49 +0000