summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2017-01-02Makefile: preserve output for images that can contain HAB BlocksSven Ebenfeld
To being able to sign created binaries, we need to know the HAB Blocks for that image. Especially for the imximage type the HAB Blocks are only available during creation of the image. We want to preserve the information until we get to sign the files. In the verbose case we still get them printed out instead of writing to log files. Cc: sbabic@denx.de v2-Changes: - No usage of MKIMAGEOUTPUT_$(@F) macro. - Predefine default value /dev/null in every involved Makefile. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
2017-01-02tools: mkimage: add firmware-ivt image type for HAB verificationSven Ebenfeld
When we want to use Secure Boot with HAB from SPL over U-Boot.img, we need to append the IVT to the image and leave space for the CSF. Images generated as firmware_ivt can directly be signed using the Freescale code signing tool. For creation of a CSF, mkimage outputs the correct HAB Blocks for the image. The changes to the usual firmware image class are quite small, that is why I implemented that directly into the default_image. Cc: sbabic@denx.de v2-Changes: None Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Tested-by: George McCollister <george.mccollister@gmail.com>
2016-12-20Merge git://git.denx.de/u-boot-dmTom Rini
2016-12-19Prepare v2017.01-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-20x86: Use binman all x86 boardsSimon Glass
Change x86 boards to use binman to produce the ROM. This involves adding the image definition to the device tree and using it in the Makefile. The existing ifdtool features are no-longer needed. Note that the u-boot.dtsi file is common and is used for all x86 boards which use microcode. A separate emulation-u-boot-dtsi is used for the others. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-12-20sunxi: Use binman for sunxi boardsSimon Glass
Move sunxi boards to use binman. This involves adding the image definition to the device tree and using it in the Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-12-20binman: Add a build rule for binmanSimon Glass
Add a standard command definition for binman so that it can be used in makefiles. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-12-05Prepare v2017.01-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-12-02Makefile: Add a target to create the .cfg filesSimon Glass
A common requirement when converting CONFIG options to Kconfig is to check that the effective configuration has not changed due to the conversion. Add a target which creates this configuration (in the form of u-boot.cfg) but does not build U-Boot. This speeds up the checking. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-11-14x86: Move efi .S files into the 'lib' directorySimon Glass
These files now need to be in a standard place so that they can be located by generic Makefile rules. Move them to the 'lib' directory. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14efi: Makefile: Export variables for use with EFISimon Glass
When building an EFI app we need three things: - start-up code - relocation code - link script These are all different for each architecture. We also need special compiler flags in some cases. Add top-level Makefile variables for these along with documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2016-11-14Prepare v2016.11Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-31Prepare v2016.11-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-30sunxi: Rename CONFIG_SUNXI to CONFIG_ARCH_SUNXIJagan Teki
CONFIG_SUNXI -> CONFIG_ARCH_SUNXI and removed CONFIG_SUNIX from config_whitelist.txt Cc: Simon Glass <sjg@chromium.org> Cc: Ian Campbell <ijc@hellion.org.uk> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-10-17Prepare v2016.11-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-08Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini
2016-10-07kbuild: generate u-boot.cfg as a byproduct of include/autoconf.mkMasahiro Yamada
Our build system still parses ad-hoc CONFIG options in header files and generates include/autoconf.mk so that Makefiles can reference them. This gimmick was introduced in the pre-Kconfig days and will be kept until Kconfig migration is completed. The include/autoconf.mk is generated like follows: [1] Preprocess include/common.h with -DDO_DEPS_ONLY and retrieve macros into include/autoconf.mk.tmp [2] Reformat include/autoconf.mk.dep into include/autoconf.mk with tools/scripts/define2mk.sed script [3] Remove include/autoconf.mk.tmp Here, include/autoconf.mk.tmp is similar to u-boot.cfg, which is also generated by preprocessing include/config.h with -DDO_DEPS_ONLY. In other words, there is much overlap among include/autoconf.mk and u-boot.cfg build rules. So, the idea is to split the build rule of include/autoconf.mk into two stages. The first preprocesses headers into u-boot.cfg. The second parses the u-boot.cfg into include/autoconf.mk. The build rules of u-boot.cfg in Makefile and spl/Makefile will be gone. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-07kbuild: move no_new_adhoc_configs_check to "all" target commandMasahiro Yamada
I am going to move the build rule of u-boot.cfg. Before that, no_new_adhoc_configs_check must be tweaked to not depend on it. The ad-hoc option check can be done at the end of build, along with other checks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-10-06tools: mkimage: add support for Vybrid image formatAlbert ARIBAUD \(3ADEV\)
This format can be flashed directly at address 0 of the NAND FLASH, as it contains all necessary headers. Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
2016-10-03Prepare v2016.11-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-26Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-22Makefile: rm u-boot.cfg dependencies are missingStephen Warren
Prior to the previous patch, a freshly created .u-boot.cfg.cmd may not correctly represent all dependencies for u-boot.cfg. The previous change only solved this issue for fresh builds; when performing an incremental build, the deficient .u-boot.cfg.cmd is already present, so u-boot.cfg is not rebuilt, and hence .u-boot.cfg.cmd is not rebuilt with the correct content. Solve this by explicitly detecting when the dependency file .u-boot.cfg.d has not been integrated into .u-boot.cfg.cmd, and force u-boot.cfg to be rebuilt in this case by deleting it first. This is possible since if_changed_dep will always delete .u-boot.cfg.d when it executes successfully, so its presence means either that the previous build was made by a source tree that contained a Makefile that didn't include the previous patch, or that the build failed part way through executing if_changed_dep for u-boot.cfg. Forcing a rebuild of u-boot.cfg is required in the former case, and will cause no additional work in the latter case, since the file would be rebuilt anyway for the same reason it was being rebuilt by the previous build. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-09-22Makefile: use if_change_dep for u-boot.cfgStephen Warren
cmd_cpp_cfg generates a dependency output, but because it's invoked using if_changed rather than if_changed_dep, that dependency file is ignored. This results in Kbuild not knowing about which files u-boot.cfg depends on, so it may not be rebuilt when required. A practical result of this is that u-boot.cfg may continue to reference CONFIG_ options that no longer exist in the source tree, and this can cause the adhoc config options check to fail. This change modifies Makefile to use if_changed_dep, which in turn causes all dependencies to be known to the next make invocation. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2016-09-16Makefile: Give a build error if ad-hoc CONFIG options are addedSimon Glass
New CONFIG options should be added via Kconfig. To help prevent new ad-hoc CONFIGs from being added, give a build error when these are detected. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
2016-09-14driver/ddr/fsl: Add general MMDC driver and reuse common MMDC driver for ls1012aShengzhou Liu
This general MMDC driver adds basic support for Freescale MMDC (Multi Mode DDR Controller). Currently MMDC is integrated on ARMv8 LS1012A SoC for DDR3L, there will be a update to this driver to support more flexible configuration if new features (DDR4, multiple controllers/chip selections, etc) are implimented in future. Meantime, reuse common MMDC driver for LS1012ARDB/LS1012AQDS/ LS1012AFRDM. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-09-12Prepare v2016.09Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-22Prepare v2016.09-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-08-20Makefile: Remove tags file on mrproperVignesh R
make tags creates a symbolic link called tags to ctags. Remove this file on make mrproper or make distclean. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-20tests: Introduce DT overlay testsMaxime Ripard
This adds a bunch of unit tests for the "fdt apply" command. They've all been run successfully in the sandbox. However, as you still require an out-of-tree dtc with overlay support, this is disabled by default. Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-08-15xtensa: add support for the xtensa processor architecture [1/2]Chris Zankel
The Xtensa processor architecture is a configurable, extensible, and synthesizable 32-bit RISC processor core provided by Cadence. This is the first part of the basic architecture port with changes to common files. The 'arch/xtensa' directory, and boards and additional drivers will be in separate commits. Signed-off-by: Chris Zankel <chris@zankel.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-08-05Makefile: Allow 'make tests' to run testsSimon Glass
Add this shortcut for running tests. Unfortunately 'make test' cannot be used as it is an existing directory. Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Teddy Reed <teddy.reed@gmail.com>
2016-07-27Add a power domain framework/uclassStephen Warren
Many SoCs allow power to be applied to or removed from portions of the SoC (power domains). This may be used to save power. This API provides the means to control such power management hardware. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
2016-07-25Prepare v2016.09-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-15Merge git://git.denx.de/u-boot-dmTom Rini
2016-07-14dm: Makefile: Build of-platdata before SPLSimon Glass
Since SPL needs the of-platdata structures, build these before starting to build any SPL components. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14sandbox: Don't print a warning for CONFIG_I2C_COMPATSimon Glass
Sandbox includes this code to provide build coverage. While we retain this feature we should have sandbox build it. Sandbox does not in fact use the I2C compatibility mode. Showing a warning for sandbox is just confusing, since no conversion is expected. Drop the warning for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-14tools: Allow building with debug enabledSimon Glass
Sometimes it is useful to build tools with debugging information included so that line-number information is available when run under gdb. Add a Kconfig option to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-07-11Prepare v2016.07Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-07-01Prepare v2016.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-24kbuild: avoid race between dtbs and dt/dt.dtb targetsMasahiro Yamada
If the final targets depend on both "dtbs" and "dts/dt.dtb", and -j option is given to the command line, multiple threads descend into the dts/ directory, which causes build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Andreas Dannenberg <dannenberg@ti.com>
2016-06-24Use C locale when setting CC_VERSION_STRING and LD_VERSION_STRING.Vagrant Cascadian
The output reported may be locale-dependent, which results in unreproducible builds. $ LANG=C ld --version | head -n 1 GNU ld (GNU Binutils for Debian) 2.26 $ LANG=it_CH.UTF-8 ld --version | head -n 1 ld di GNU (GNU Binutils for Debian) 2.26 Forcing LC_ALL=C ensures the output is consistant regardless of the build environment. Thanks to HW42 for debugging the issue: https://lists.alioth.debian.org/pipermail/reproducible-builds/Week-of-Mon-20160606/005722.html For more information about reproducible builds: https://reproducible-builds.org/ Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-06-20Prepare v2016.07-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-06-06Prepare v2016.07-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-27Remove/update old generic-board documentation and warningSimon Glass
Remove the warning from the Makefile, since boards that do not use generic board will no longer build. Also update documentation. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andreas Bießmann <andreas@biessmann.org>
2016-05-23acpi: Clean IASL generated intermediate filesBin Meng
For boards that support ACPI, there are dsdt.aml, dsdt.asl.tmp and dsdt.c in the board directory after a successful build. These are intermediate files generated by IASL, and should be removed during a 'make clean'. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-16Prepare v2016.05Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-05-02mkimage: fix argument parsing on BSD systemsAndreas Bießmann
The getopt(3) optstring '-' is a GNU extension which is not available on BSD systems like OS X. Remove this dependency by implementing argument parsing in another way. This will also change the lately introduced '-b' switch behaviour. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-25Prepare v2016.05-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-21Prepare v2016.05-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-11Prepare v2016.05-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2024-12-28 08:19:29 +0000