summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)Author
2019-10-16Merge tag 'dm-pull-15oct19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman enhancements: - Dropping some test Elf files and building them from source instead - Refactoring of x86 16-bit entries - Support for SPL symbols within sections - Handle the 'notes' sections and hidden symbols in recent binutils - Improved error reporting with a tool fails libfdt and documentation fixes vboot required-key test driver model power-domain controls patman Message-Id enhancement
2019-10-16Makefile: Skip symbolic links to files for cscopeAndy Shevchenko
cscope complains that it can't find files that appears to be symbolic links cscope: cannot find file tools/binman/test/u_boot_binman_syms_bad.c cscope: cannot find file tools/version.h `find -L` tests properties, but name, and cscope can't cope with symbolic links (a lot of bugs in upstream were simple closed as kinda invalid). To work around the problem, exclude symbolic links from the cscope.files. Note, it's done in two pass to speed up the process (`-exec realpath ...` approach is not portable and introduces a 3x delay). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-15binman: x86: Separate out 16-bit reset and init codeSimon Glass
At present these two sections of code are linked together into a single 2KB chunk in a single file. Some Intel SoCs like to have a FIT (Firmware Interface Table) in the ROM and the pointer for this needs to go at 0xffffffc0 which is in the middle of these two sections. Make use of the new 'reset' entry and change the existing 16-bit entry to include just the 16-bit data. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-10-13spl, Makefile: Take external offset into account for fit imagesSjoerd Simons
When building a FIT image for SPL to load also take into account the configured external offset. This allows the SPL to load the u-boot FIT image correctly when configuring SECURE_BOOT on i.mx6 is enabled (with CONFIG_FIT_EXTERNAL_OFFSET=0x3000). Note this doesn't allow secure booting; but it does allow an unsigned SPL/u-boot with secure boot support eanbled to boot on open device. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
2019-10-09Merge tag 'u-boot-imx-20191009' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191009 ------------------- Travis : https://travis-ci.org/sbabic/u-boot-imx/builds/595148532 - MX6UL / ULZ - Toradex board - Allow to set OCRAM for MX6Q/D - MX7ULP - MX8: (container image, imx8mq_mek), SCU API - fix several board booting from SD/EMMC (cubox-i for example) - pico boards [trini: display5 merged manually] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-08imx: replace CONFIG_SECURE_BOOT with CONFIG_IMX_HABStefano Babic
CONFIG_SECURE_BOOT is too generic and forbids to use it for cross architecture purposes. If Secure Boot is required for imx, this means to enable and use the HAB processor in the soc. Signed-off-by: Stefano Babic <sbabic@denx.de>
2019-10-08imx: add container targetPeng Fan
To support SPL loading container file, add a new Makefile target, and introduce a new Kconfig file to source the cfg file which will be parsed by mkimage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2019-10-08spl: Convert CONFIG_SPL_SIZE_LIMIT to hexSimon Glass
This is currently a decimal value which is not as convenient or meaningful. Also U-Boot tends to use hex everywhere. Convert this option to hex and add a comment for the size_check macro. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct the typo in the commit title] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Allow selection of logging verbositySimon Glass
Support a new BINMAN_VERBOSE option to the build, to allow passing the -v flag to binman. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-08binman: Pass the toolpath to binman from the main MakefileSimon Glass
Pass in the toolpath in case binman needs to use tools compiled in the U-Boot tools/ directory. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-07Prepare v2019.10Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-04Makefile: mrproper should remove *.pyc filesHeinrich Schuchardt
*.pyc files contain compiled Python bytecode. 'make mrproper' should remove them. Removing *.pyc files helps for instance sometimes when running into an error "binman: Unknown entry type 'blob' in node '/binman/blob'". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-10-04Makefile: Fix typo around CONFIG_SPL_FIT_SOURCEMichal Simek
Trivial fix. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2019-09-23Prepare v2019.10-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-09-19dm: MIGRATION: Add migration plan for CONFIG_DMHeinrich Schuchardt
For many sub-systems we already require the driver model to be used. Yet there is still a handful of boards that do not have CONFIG_DM enabled. We should make CONFIG_DM compulsory with release v2020.01 Conversion dates for CONFIG_DM_SPL and CONFIG_DM_TPL are yet to be defined. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-09-11rockchip, Makefile: add idbloader.img targetMatwey V. Kornilov
Many Rockchip platforms require the same u-boot deploy procedure when TPL and SPL both enabled. The following examples are taken from doc/README.rockchip and board/theobroma-systems/lion_rk3368/README: RK3288: ./tools/mkimage -n rk3288 -T rksd -d ./tpl/u-boot-tpl.bin out cat ./spl/u-boot-spl-dtb.bin >> out sudo dd if=out of=/dev/mmcblk0 seek=64 RK3328: ./tools/mkimage -n rk3328 -T rksd -d ./tpl/u-boot-tpl.bin idbloader.img cat ./spl/u-boot-spl.bin >> idbloader.img sudo dd if=idbloader.img of=/dev/mmcblk0 seek=64 RK3368: ./tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img cat spl/u-boot-spl-dtb.bin >> spl-3368.img dd if=spl-3368.img of=/dev/sdb seek=64 RK3399: ./tools/mkimage -n rk3399 -T rksd -d ./tpl/u-boot-tpl-dtb.bin out cat ./spl/u-boot-spl-dtb.bin >> out sudo dd if=out of=/dev/sdc seek=64 Here, we introduce generic idbloader.img target which is the TPL image followed by the SPL binary. Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-04network: set timeline for CONFIG_DM_ETH conversionHeinrich Schuchardt
The driver model has been supported for network drivers since 2015. It is time to convert the remaining boards. Set July 2020 as a timeline. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-31Makefile: fix newline escaping for CONFIG_DEFAULT_ENV_FILERasmus Villemoes
I wanted this to be compatible with mkenvimage, including the ability to embed newlines in variables by escaping them. But I failed to check that it works more than once. Fixes: f3d8f7dd73a (Allow providing default environment from file) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2019-08-30Makefile: clean build generated SPL binary for TI AM65xSuniel Mahesh
TI AM65x platforms (evm and HS) generate an SPL image 'tispl.bin*' and there is no rule for cleanup. Added entry for cleanup in clean target. Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
2019-08-27Merge https://gitlab.denx.de/u-boot/custodians/u-boot-mpc85xxTom Rini
Support of device tree model for T2080RDB, T4240RDB, T1024RDB, T1042D4RDB, P1020RDB, P2020RDB, P2041RDB, P3041DS, P4080DS, P5040DS and MPC8548CDS. Also support of i2c dm model.
2019-08-26Prepare v2019.10-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-08-26powerpc: mpc85xx: Add device tree support option for PBL boot imageHou Zhiqiang
The current Makefile always use u-boot.bin to generate PBL boot image (u-boot.pbl), this patch changes it to use u-boot-with-dtb.bin to support device tree when CONFIG_OF_SEPARATE is enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-26Makefile: support building SPL FIT images without device treesLukas Auer
When building a U-Boot FIT image, the device trees specified by the board are unconditionally built for inclusion in the FIT image. However, not all device tree providers, such as CONFIG_OF_PRIOR_STAGE, require a device tree to be built and bundled with the U-Boot binary. They rely on other mechanisms to provide the device tree to U-Boot. Compilation on boards with these device tree providers fails, because they do not specify a device tree. Change the makefile rules to conditionally build the device trees if CONFIG_OF_SEPARATE, CONFIG_OF_EMBED, or CONFIG_OF_HOSTFILE is selected as device tree provider. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-13Prepare v2019.10-rc2Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-29Prepare v2019.10-rc1Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-07-29Merge tag 'dm-pull-29jul19' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-dm binman support for replacing files
2019-07-29i2c: remove i2c driver-model compatibility layerBartosz Golaszewski
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon remove it altogether. Stop building it in sandbox mode. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
2019-07-29Makefile: fix implementation of BINMAN_DEBUGStephen Warren
binman only accepts the -D argument early on the command-line, yet the Makefile currently passes it near the end. This causes the build to fail if this feature is used. Re-order the command-line to fix this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-07-24binman: Convert to use ArgumentParserSimon Glass
This class is the new way to handle arguments in Python. Convert binman over to use it. At the same time, introduce commands so that we can separate out the different parts of binman functionality. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-10arm64: add an option to switch visibility of CONFIG_SYS_INIT_SP_BSS_OFFSETMasahiro Yamada
By default, CONFIG_SYS_INIT_SP_BSS_OFFSET was made invisible by not giving a prompt to it. The only way to define it is to hard-code an extra entry in SoC/board Kconfig, like arch/arm/mach-tegra/tegra{186,210}/Kconfig. Add a prompt to it in order to allow defconfig files to specify the value of CONFIG_SYS_INIT_SP_BSS_OFFSET. With this, CONFIG_SYS_INIT_SP_BSS_OFFSET would become always visible. So, we need a new bool option to turn it off by default. I move the 'default 524288' to the common place. This value is not too big, but is big enough to avoid the overwrap of DT in most platforms. If 512KB is not a suitable choice for your platform, you can change it from your defconfig or menuconfig etc. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2019-07-08Prepare v2019.07Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-26rockchip: rk3399: Get bl31.elf via BL31Jagan Teki
Right now rockchip platform need to copy bl31.elf into u-boot source directory to make use of building u-boot.itb. So, add environment variable BL31 like Allwinner SoC so-that the bl31.elf would available via BL31. If the builds are not exporting BL31 env, the make_fit_atf.py explicitly create dummy bl31.elf in u-boot root directory to satisfy travis builds and it will show the warning on console as WARNING: BL31 file bl31.elf NOT found, resulting binary is non-functional WARNING: Please read Building section in doc/README.rockchip Note, that the dummy bl31 files were created during not exporting BL31 case would be removed via clean target in Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-26Makefile: clean bl31_*.binJagan Teki
Rockchip platform has its python script that would generate various bl31_*bin for creating u-boot.itb file by taking bl31.elf as input. These bl31_*.bin files are generated in u-boot root directory and have no rule to clean it up. so add support for it by adding in command entry of clean target in Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-26Makefile: clean image.mapJagan Teki
binman tools for creating single image build will create image.map at the end, which has information about binman image node details. current u-boot, is unable to clean this image.map so add a command entry in clean target in Makefile. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-06-20doc: Remove duplicated documentation directoryBreno Matheus Lima
Commit ad7061ed742e ("doc: Move device tree bindings documentation to doc/device-tree-bindings") moved all device tree binding documentation to doc/device-tree-bindings directory. The current U-Boot project still have two documentation directories: - doc/ - Documentation/ Move all documentation and sphinx files to doc directory so all content can be in a common place. Signed-off-by: Breno Lima <breno.lima@nxp.com>
2019-06-17Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
- Drop zipitz2 board (Tom) - Add DEPRECATED option (Tom) - Mark legacy or non-dm drivers as DEPRECATED (Jagan)
2019-06-13Makefile: Trigger a warning for legcay spi driversJagan Teki
We have a warning text for non dm converted spi drivers, but the plan is to mark all these respective drivers with CONFIG_DEPRECATED. So, trigger a warning saying that these driver configurations and associated code will remove in v2019.07 (earlier plan is to remove it from v2019.04) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-13Makefile: Trigger a Warning if DEPRECATED is definedJagan Teki
If configured target has deprecated configs enabled, trigger a warning about this. Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [trini: Change from BROKEN to DEPRECATED] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-11Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imxTom Rini
u-boot-imx-20190612 -------------------- - Board fixes: - imx6logic - wandboard - mx6sabre boots again - imx8qm_mek - pico-* boards - Toradex apalis / colibri - engicam imx6 (environment) - KP MX53 - opos6ul - Switch to DM: - vining2000 - dh MX6 - Toradex colibri i.MX7 - Novena - Security : fix CSF size for HAB - Other: - imx: fix building for i.mx8 without spl - pcie and switch to DM mx6sabreauto: Enable SPL SDP support
2019-06-11arm, imx, Makefile: fix u-boot-dtb.imx build in CONFIG_MULTI_DTB_FIT caseHeiko Schocher
in case CONFIG_MULTI_DTB_FIT is set and u-boot-dtb.imx image is build, currently u-boot-dtb.bin is used for generating the u-boot-dtb.imx binary, which is wrong, as it contains only a dtb blob not the fit.blob Use instead the u-boot-fit-dtb.bin for generating u-boot-dtb.imx which contains the fit.blob. Signed-off-by: Heiko Schocher <hs@denx.de>
2019-06-10Prepare v2019.07-rc4Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-07spl: add overall SPL size checkSimon Goldschmidt
This adds a size check for SPL that can dynamically check generated SPL binaries (including devicetree) for a size limit that ensures this image plus global data, heap and stack fit in initial SRAM. Since some of these sizes are not available to make, a new host tool 'spl_size_limit' is added that dumps the resulting maximum size for an SPL binary to stdout. This tool is used in toplevel Makefile to implement the size check on SPL binaries. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-06-07configs: define CONFIG_SPL_SIZE_LIMITHeinrich Schuchardt
A new configuration variable CONFIG_SPL_SIZE_LIMIT is introduced to define the board specific maximum size for the SPL file. Use Makefile function size_check() to implement the test. Depending on the size of CONFIG_SPL_SIZE_LIMIT an error like the following is thrown: spl/u-boot-spl.bin exceeds file size limit: limit: 30720 bytes actual: 33426 bytes excess: 2706 bytes make: *** [Makefile:1663: spl/u-boot-spl.bin] Error 1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-06-07imx: move BOARD_SIZE_CHECK to main MakefileHeinrich Schuchardt
We currently have duplicate definitions for BOARD_SIZE_CHECK in Makefile and arch/arm/mach-imx/Makefile. Move the board size check from arch/arm/mach-imx/Makefile to Makefile. Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like an error like the following is thrown: u-boot-dtb.imx exceeds file size limit: limit: 503696 bytes actual: 509720 bytes excess: 6024 bytes make: *** [Makefile:1051: u-boot-dtb.imx] Error 1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2019-06-07Makefile: reusable function for BOARD_SIZE_CHECKHeinrich Schuchardt
Carve out function size_check from macro BOARD_SIZE_CHECK. This will allow us to reuse the function for other file size checks. Depending on the value of CONFIG_BOARD_SIZE_LIMIT an error like the following is thrown: u-boot-dtb.img exceeds file size limit: limit: 409516 bytes actual: 444346 bytes excess: 34830 bytes make: *** [Makefile:1212: u-boot-dtb.img] Error 1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-27Prepare v2019.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-21ARM: rmobile: Add recovery SPL for R-Car Gen3Marek Vasut
Build an SPL which can be started via SCIF download mode on R-Car Gen3 and allows loading and executing U-Boot uImage with the next stage code. This is also useful for starting e.g. ATF BL2, which inits the hardware and returns to the U-Boot SPL, which can then load e.g. U-Boot proper. The H3, M3-W, M3-N SoCs have plenty of SRAM for storing the U-Boot SPL while the payload, e.g. ATF BL2, executes, so there is no problem here. However, E3 and D3 have much less SRAM, hence the loader uses a trick where it copies itself beyond the area used by BL2 and executes from there. That area is 32kiB large and not enough to hold U-Boot SPL, BSS, stack and malloc area, so the later two are placed at +0x4000 offset from start of SRAM, another area not used by ATF BL2. To make things even more complicated, the SCIF loader cannot load to the upper 32kiB of the SRAM directly, hence the copying approach. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-05-19Revert "Makefile: Prioritize external dtb if defined"Tom Rini
This is causing unexpected size growth in the normal case and is likely to have been mis-applied by myself. This reverts commit 3eaf6dcd9362b56e3217559401287dd8fa35b5b2. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-18Makefile: Prioritize external dtb if definedMichal Simek
Prioritize external dtb if its passed via EXT_DTB than the dtb that was built in the tree. With this patch it appends the specified external dtb to the u-boot image. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-24 16:59:24 +0000