summaryrefslogtreecommitdiff
path: root/arch/Kconfig
AgeCommit message (Collapse)Author
2020-05-25sandbox: move compression option to KconfigMichael Walle
CONFIG_BZIP2 and CONFIG_GZIP_COMPRESSED are Kconfig options. Select them by CONFIG_SANDBOX instead of setting them in configs/sandbox.h. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-04-16sandbox: implement ft_board_setup()Heinrich Schuchardt
Currently we are not able to test reservations created by ft_board_setup(). Implement ft_board_setup() to create an arbitrary reservation and enable OF_BOARD_SETUP. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromum.org>
2019-12-15x86: Enable pinctrl in SPL and TPLSimon Glass
If these phases are used we typically want to enable pinctrl in then, so that pad setup and GPIO access are possible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15x86: Don't imply libfdt or SPI flash in TPLSimon Glass
We don't want to pull in libfdt if of-platdata is being used, since it reduces the available code-size saves. Also, SPI flash is seldom needed in TPL. Drop these options. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15x86: Move UCLASS_IRQ into a separate fileSimon Glass
Update this uclass to support the needs of the Apollo Lake ITSS. It supports four operations. Move the uclass into a separate directory so that sandbox can use it too. Add a new Kconfig to control it and enable this on x86. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-15x86: sandbox: Add a PMC emulator and testSimon Glass
Add a simple PMC for sandbox to permit tests to run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-02sh: r2dplus: Enable OF controlMarek Vasut
Enable OF control for SH4 R2Dplus board. This is necessary, because the PCI uclass is designed in a way that makes it depend on DT and disallows instanciating devices without DT (e.g. with platdata). Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2019-08-26riscv: add SPL supportLukas Auer
U-Boot SPL on the generic RISC-V CPU supports two boot flows, directly jumping to the image and via OpenSBI firmware. In the first case, both U-Boot SPL and proper must be compiled to run in the same privilege mode. Using OpenSBI firmware, U-Boot SPL must be compiled for machine mode and U-Boot proper for supervisor mode. To be able to use SPL, boards have to provide a supported SPL boot device. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Anup Patel <anup.patel@wdc.com>
2019-08-19sysreset: move stm32mp sysreset poweroff implementation to sysreset uclassUrja Rannikko
This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF to signal when we need it. Enable it from the STPMIC1 config and in sandbox. The config flag is transitionary, that is it can be removed after all poweroff implementations use sysreset, and just have CMD_POWEROFF depend on sysreset. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-18test: dm: add a test for MDIO MUX DM uclassAlex Marginean
Adds a test using a makeshift MDIO MUX. The test is based on the existing MDIO test. It uses the last emulated PHY register to verify MUX selection. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-15test: dm: add MDIO testAlex Marginean
A very simple test for DM_MDIO, mimicks a register write/read through the sandbox bus to a dummy PHY. Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-07-11pci_ep: add pci endpoint sandbox driverRamon Fried
Add a dummy PCI endpoint for sandbox. Supporting only a single function, it allows setting and reading header configuration. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-13Kconfig: Add SPI / SPI_FLASH as dependenciesTom Rini
In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-05-24m68k: add OF control support to m68kAngelo Dureghello
Add SUPPORT_OF_CONTROL at this stage, to avoid to break build bisectability. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
2019-05-09Merge tag 'rockchip-for-v2019.07-rc1' of git://git.denx.de/u-boot-rockchipTom Rini
Improvements and new features: - split more rockchip pinctrl_core feature into per SoC - enable TPL for evb-rk3399 board - enable TPL/SPL for evb-px5 board - enable TPL and OP-TEE support for evb-rk3229 - update fix in arm common assembly start code for rockchip header file - update default SPL_FIT_GENERATOR for rockchip - rk3399 boards update to use '-u-boot.dtsi' - add new rk3399 boards: Nanopi M4, Nanopc T4 - enable sound for chromebook_minnie
2019-05-08sysreset: enable driver support in SPL/TPLKever Yang
SPL/TPL also need use sysreset for some feature like panic callback. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08x86: Enable the RTC on all boardsSimon Glass
With the move to Kconfig this option should be set in Kconfig, not in the config header file. Move it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-08x86: Support SPL and TPLSimon Glass
At present only chromebook_link64 supports SPL. It is useful to eb able to support both TPL and SPL to implement verified boot on x86. Enable the options for both along with some suitable default options needed to boot through these phases. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-05arch: armv8: Provide a way to disable cache maintenance opsVignesh Raghavendra
On AM654 SoC(arm64) which is IO coherent and has L3 Cache, cache maintenance operations being done to support non-coherent platforms causes issues. For example, here is how U-Boot prepares/handles a buffer to receive data from a device (DMA Write). This may vary slightly depending on the driver framework: Start DMA to write to destination buffer Wait for DMA to be done (dma_receive()/dma_memcpy()) Invalidate destination buffer (invalidate_dcache_range()) Read from destination buffer The invalidate after the DMA is needed in order to read latest data from memory that’s updated by DMA write. Also, in case random prefetch has pulled in buffer data during the “wait for DMA” before the DMA has written to it. This works well for non-coherent architectures. In case of coherent architecture with L3 cache, DMA write would directly update L3 cache contents (assuming cacheline is present in L3) without updating the DDR memory. So invalidate after “wait for DMA” in above sequence would discard latest data and read will cause stale data to be fetched from DDR. Therefore invalidate after “wait for DMA” is not always correct on coherent architecture. Therefore, provide a Kconfig option to disable cache maintenance ops on coherent architectures. This has added benefit of improving the performance of DMA transfers as we no longer need to invalidate/flush individual cache lines(especially for buffer thats several KBs in size). In order to facilitate use of same Kconfig across different architecture, I have added the symbol to top level arch/Kconfig file. Patch currently disables cache maintenance ops for arm64 only. flush_dcache_all() and invalidate_dcache_all() are exclusively used during enabling/disabling dcache and hence are not disabled. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2019-02-27riscv: Enable create symlink using kconfigAnup Patel
We select CREATE_ARCH_SYMLINK for RISC-V so that we can have include/asm/arch linked to include/asm/arch-xyz. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-02-20x86: sandbox: pch: Add a CONFIG option for PCHSimon Glass
At present this uclass is selected only on x86. In order to add a test for it, it must also support sandbox. Create a new CONFIG_PCH option and enable it on x86 and sandbox. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-12-13dm: sound: Create an option to use driver model for soundSimon Glass
The U-Boot sound system provides basic support for beeping. At present it does not use driver model, but it needs to be converted. Add an option to enable driver model for sound. For now it is not connected to anything. Future work will add drivers which use this option. It will then be removed once everything is converted. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-26test: Add a simple test for bloblistSimon Glass
Add a unit test for the bloblist functionality and enable bloblist for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-14test: dm: virtio: Add test cases for virtio uclassBin Meng
Now that we have a sandbox virtio transport driver, add some test cases to test virtio uclass driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-11-14x86: Implement arch-specific io accessor routinesBin Meng
At present the generic io{read,write}{8,16,32} routines only support MMIO access. With architecture like x86 that has a separate IO space, these routines cannot be used to access I/O ports. Implement x86-specific version to support both PIO and MMIO access, so that drivers for multiple architectures can use these accessors without the need to know whether it's MMIO or PIO. These are ported from Linux kernel lib/iomap.c, with slight changes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-07Kconfig: sandbox: enable cmd_avb and dependenciesJens Wiklander
Enables cmd_avb and its dependencies need to run the AVB tests. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> [trini: Disable for sandbox_noblk] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-07sandbox: imply CONFIG_TEE (TEE uclass)Jens Wiklander
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-03riscv: kconfig: Imply DM support for some common driversBin Meng
This implies DM support for some common drivers that are used on RISC-V. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-10-03riscv: kconfig: Select DM and OF_CONTROLBin Meng
RISC-V is a pretty new architecture and should support DM and OF_CONTROL by default. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de>
2018-10-03riscv: kconfig: Normalize architecture name spellingBin Meng
It's RISC-V that is the official name, not RISCV. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Reviewed-by: Rick Chen <rick@andestech.com>
2018-09-29dm: test: Add "/firmware" node scan testRajan Vaja
Add a test which verifies that all subnodes under "/firmware" nodes are scanned. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Added 'imply FIRMWARE' to sandbox Kconfig to fix test failures, fixed ordering of lines in arch/sandbox/dts/test.dts and test/dm/Makefile, updated #if condition in drivers/firmware/firmware-uclass.c: Signed-off-by: Simon Glass <sjg@chromium.org>
2018-09-18sandbox: Enable bitrev library buildBin Meng
Imply CONFIG_BITREVERSE for Sandbox. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-30dm: Change CMD_DM enablingMichal Simek
CMD_DM is used for debug purpose and it shouldn't be enabled by default via Kconfig. Unfortunately this is in the tree for quite a long time that's why solution is to use imply DM for all targets which are enabling DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
2018-07-30Kconfig: Sort bool, default, select and imply optionsMichal Simek
Fix Kconfig bool, default, select and imply options to be alphabetically sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2018-07-20x86: Switch to use DM sysreset driverBin Meng
This converts all x86 boards over to DM sysreset. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-04-27Convert CONFIG_SPI to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-08Move most CONFIG_HAVE_BLOCK_DEVICE to KconfigAdam Ford
config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-30Convert CONFIG_SYS_BOOT_GET_{CMDLINE, KBD} to KconfigDerald D. Woods
This converts the following to Kconfig: CONFIG_SYS_BOOT_GET_CMDLINE CONFIG_SYS_BOOT_GET_KBD Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
2018-01-12riscv: Modify generic codes to support RISC-VRick Chen
Support common commands bdinfo and image format, also modify common generic flow for RISC-V. Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Rick Chen <rickchen36@gmail.com> Signed-off-by: Greentime Hu <green.hu@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-09-08usb: net: migrate USB Ethernet adapters to KconfigChris Packham
This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-08usb: net: migrate CONFIG_USB_HOST_ETHER to KconfigChris Packham
CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-24x86: kconfig: Imply CMD_PCIBin Meng
Let's imply the 'pci' command to access the de facto interconnect bus in an x86 system. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
2017-08-11Convert CONFIG_CMD_ZBOOT to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_ZBOOT Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-11Convert CONFIG_CMD_SF_TEST to KconfigSimon Glass
This converts the following to Kconfig: CONFIG_CMD_SF_TEST Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-08-01x86: Switch all boards to use DM SCSIBin Meng
After MMC is converted to DM, convert to use DM SCSI as well for all x86 boards and imply BLK for both MMC and SCSI drivers. CONFIG_SCSI_DEV_LIST is no longer used. Clean them up. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: Convert MMC to driver modelSimon Glass
Convert the pci_mmc driver over to driver model and migrate all x86 boards that use it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: remove DM_MMC from edison_defconfig] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-08-01x86: kconfig: Move USB to platform KconfigBin Meng
Like other peripheral drivers, move USB related drivers to platform Kconfig as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Imply DM uclass driversBin Meng
Now that all x86 boards have been converted to use DM, we can imply these uclass drivers (DM_ETH, DM_RTC, DM_USB, DM_VIDEO) from the top level. Previously DM_GPIO, DM_KEYBOARD, DM_SERIAL, DM_SPI, DM_SPI_FLASH are selected. Change to use 'imply' to allow them to be removed. Note with this change, chromebook_link64 build fails: common/built-in.o:(.data.env_htab+0xc): undefined reference to 'env_flags_validate' lib/built-in.o: In function `hsearch_r': lib/hashtable.c:380: undefined reference to 'env_callback_init' lib/hashtable.c:382: undefined reference to 'env_flags_init' make[1]: *** [spl/u-boot-spl] Error 1 CONFIG_SPL_ENV_SUPPORT is required for chromebook_link64 to build again. This is just a workaround as it is not needed at all. See commit bda40d5 "x86: qemu: Add a config for 64-bit U-Boot" for the same issue seen on QEMU 64-bit target. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Select OF_CONTROLBin Meng
This is a must have for all x86 boards. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-01x86: kconfig: Select PCI and DM_PCIBin Meng
PCI is the de facto interconnect bus in an x86 system. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit (git 2.34.1) at 2024-12-23 23:07:04 +0000