summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
AgeCommit message (Collapse)Author
2020-01-02pci: layerscape: move PCIE related CONFIG to PCI KconfigPankaj Bansal
move the PCIE related config from arch Kconfig to PCI Kconfig. As the PCI_LAYERSCAPE driver is being used in platform other than fsl-layerscape platforms like ls102xa. Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26fsl-lsch3: soc: Enable AHB read support for Flexspi controllerKuldeep Singh
Enable AHB support for Flexspi controller interface meaning memory can be accessed via md command using absolute addresses Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajat Srivastava <rajat.srivastava@nxp.com> Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-12-26armv8: Add workaround for USB erratum A-050106Ran Wang
USB3.0 Receiver needs to enable fixed equalization for each of PHY instances in an SOC. This is similar to erratum A-009007, but this one is for LX2160A, and the register value is different. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08freescale/layerscape: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal
Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-08armv8: ls1028a: add erratum A-050382 workaroundLaurentiu Tudor
Erratum A-050382 states that the eDMA ICID programmed in the eDMA_AMQR register in DCFG is not correctly forwarded to the SMMU. The workaround consists in programming the eDMA ICID in the eDMA_AMQR register in DCFG to 40. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-12armv8: fsl-layerscape: Update I2C clock dividerChuanhua Han
By default, i2c input clock is programmed at platform clk / 2 in u-boot, but this is not correct for all the platforms, Update I2C clock divider's default values as per SoC (LS1012A, LS1028A, LX2160A and LS1088A). Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-09-04drivers/fsl-mc: Create Kconfig file to manage driver specific configs betterFlorinel Iordache
Create drivers/net/fsl-mc/Kconfig and move fsl-mc specific configs from arch/arm/cpu/armv8/fsl-layerscape/Kconfig to this new Kconfig Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2019-08-22armv8: kconfig: Fix some platforms incorrect I2C clock dividerChuanhua Han
By default, i2c input clock is platform clk / 2, but some of the platform of i2c clock divider does not meet this kind of circumstance, so alone to set default values for these platforms. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: ls1088a: Enable DM support for pcf2127 rtcChuanhua Han
Enable related configs on all ls1088aqds boards to support pcf2127 rtc DM function. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: ls2088a: Enable DM support for ds3231 rtcChuanhua Han
Enable related configs on all ls2088aqds boards to support ds3231 rtc DM function. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: ls1028a: Enable DM support for pcf2127 rtcChuanhua Han
Enable related configs on all ls1028aqds boards to support pcf2127 rtc DM function. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Reviewed-by: Alex Marginean <alexm.osslist@gmail.com> Tested-by: Alex Marginean <alexm.osslist@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-08-22configs: lx2160: enable DM support for pcf2127 rtcChuanhua Han
Enable related configs on all lx2160ardb boards to support pcf2127 rtc DM feature. Also remove SYS_I2C_MXC_I2Cx, where x is from 1 to 8 from Kconfig. Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-07-18arm: move CONFIG_TFABOOT to generic KconfigAKASHI Takahiro
Currently, CONFIG_TFABOOT is located in armv8/fsl-layerscape Kconfig, but it will be also useful for other targets if some additional configuration are necessary. So move it to arch/arm/Kconfig. Please note that CONFIG_TFABOOT still depends on CONFIG_ARCH_SUPPORT_TFABOOT and so the menu won't come up if any target doesn't need its own customization for TF-A boot. This will maintain the compatibility. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Rajesh Bhagat <rajesh.bhagat@nxp.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Sriram Dash <sriram.dash@nxp.com> Cc: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Cc: Peng Ma <peng.ma@nxp.com> Cc: Yuantian Tang <andy.tang@nxp.com> Cc: Pankit Garg <pankit.garg@nxp.com>
2019-06-19armv8: ls1028a: enable workaround for USB erratum A-008997Ran Wang
Enable workaround for USB erratum A-008997. Here PCSTXSWINGFULL registers has been moved to DSCR as compared to other Layerscape SoCs where it was in SCFG. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22armv8: ls1028a: Add NXP LS1028A SoC supportYuantian Tang
Ls1028a SoC is based on Layerscape Chassis Generation 3.2 architecture with features: 2 ARM v8 Cortex-A72 cores, CCI400, SEC, DDR3L/4, LCD, GPU, TSN ENETC, 2 USB 3.0, 2 eSDHC, 2 FlexCAN, 2 SPI, SATA, 8 I2C controllers, 6 LPUARTs, GPIO, SAI, qDMA, eDMA, GIC, TMU etc. Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com> Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-05-22kconfig: add dependency PCIE_LAYERSCAPE_GEN4 for FSL_PCIE_COMPATHou Zhiqiang
The LX2160A PCIe is using driver PCIE_LAYERSCAPE_GEN4 instead of PCIE_LAYERSCAPE. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: ls1043a: move SCSI_AHCI and SCSI to arm/KconfigPeng Ma
remove SCSI and SCSI_AHCI configs for ls1043ardb due to no sata interface support. this changed is to fixed the ls1043ardb compile warning as fallows: ===================== WARNING ====================== This board does not use CONFIG_DM_SCSI. Please update the storage controller to use CONFIG_DM_SCSI before the v2019.07 release. Failure to update by the deadline may result in board removal.See doc/driver-model/MIGRATION.txt for more info. ==================================================== Signed-off-by: Peng Ma <peng.ma@nxp.com> [PK: reword the patch subject] Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: layerscape: move CONFIG_LAYERSCAPE to KconfigRajesh Bhagat
Moves CONFIG_LAYERSCAPE for all NXP Layerscape platforms. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: layerscape: move TZASC and TZPC configs to KconfigRajesh Bhagat
Moves FSL_TZASC_400 and FSL_TZPC_BP147 configs to Kconfig for LS1088A and LS2088A platforms. Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-02-19armv8: emc2305: add support for fan controllerMeenakshi Aggarwal
Add support for fan controller emc2305. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2019-01-17armv8: ls2088ardb: Add TFABOOT supportRajesh Bhagat
TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2019-01-17armv8: ls1088ardb: Add TFABOOT supportPankit Garg
TFABOOT support includes: - ls1088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: lx2160a: Add LX2160A SoC SupportPriyanka Jain
LX2160A Soc is based on Layerscape Chassis Generation 3.2 architecture with features: 16 ARM v8 Cortex-A72 cores in 8 cluster, CCN508, SEC, 2 64-bit DDR4 memory controller, RGMII, 8 I2C controllers, 3 serdes modules, USB 3.0, SATA, 4 PL011 SBSA UARTs, 4 TZASC instances, etc. SoC personalites: LX2120A is SoC with Twelve 64-bit ARM v8 Cortex-A72 CPUs LX2080A is SoC with Eight 64-bit ARM v8 Cortex-A72 CPUs Signed-off-by: Bao Xiaowei <xiaowei.bao@nxp.com> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8:fsl-layerscape: Add support for Chassis 3.2Priyanka Jain
NXP layerscape architecture Chassis 3.2 builds upon chassis3 architecture with changes like DDR Memory map change, removal of IFC and support of upto 8 I2C controller. Patch add README.lsch3_2 and the above changes under macro CONFIG_NXP_LSCH3_2. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: lsch3: Add support of serdes3 modulePriyanka Jain
Some lsch3 based SoCs like lx2160a contains three serdes modules. Add support for third serdes protocol in lsch3 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: remove EL3 specific erratas for TFABOOTRajesh Bhagat
Removes EL3 specific erratas for TFABOOT, And now taken care in TFA. ARM_ERRATA_855873, SYS_FSL_ERRATUM_A008850, SYS_FSL_ERRATUM_A008511, SYS_FSL_ERRATUM_A008336, SYS_FSL_ERRATUM_A009663, SYS_FSL_ERRATUM_A009803, SYS_FSL_ERRATUM_A009942, SYS_FSL_ERRATUM_A010165 Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-12-06armv8: layerscape: Add TFABOOT supportRajesh Bhagat
Adds TFABOOT support config option and add generic code to enable execution from DDR. Signed-off-by: York Sun <york.sun@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
2018-06-08board: Kconfig: Re-Arrangement of PPA firmware and header addressesBhaskar Upadhaya
PPA firmware and header address may vary depending upon different boards, configure ppa firmware and header address in board specific Kconfig. Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-05-09armv8/fsl-lsch2: correct QMAN clockHou Zhiqiang
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-04-28distro: use imply to enable DISTRO_DEFAULTS as SoC defaultMasahiro Yamada
The default of DISTRO_DEFAULTS is messy. Using the 'imply' keyword is equivalent and cleaner. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-03-29drivers: i2c: mxc: Update SYS_I2C_MXC_I2C support in KconfigSriram Dash
NXP layerscape platforms like ls1088a, ls2088a uses MXC I2C Controller. -Remove dependency of MX6 for the same. Update related configs to use Kconfig file. -Add SYS_I2C_MXC_I2C1,_I2C2,_I2C3,_I2C4 in Kconfig -Add CONFIG_SYS_MXC_I2C1_SPEED,_I2C2_,_I2C3_,_I2C4_ in Kconfig -Add CONFIG_SYS_MXC_I2C1_SLAVE,_I2C2_,_I2C3_,_I2C4_ in Kconfig Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2018-02-09armv8: Remove dependency of SERDES for LSCH2 and LSCH3Sriram Dash
Remove dependency of SYS_HAS_SERDES for Layerscape Chasis 2 and Layerscape Chasis 3. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10armv8: Implement workaround for Cortex-A53 erratum 855873Alison Wang
855873: An eviction might overtake a cache clean operation Workaround: The erratum can be avoided by upgrading cache clean by address operations to cache clean and invalidate operations. For Cortex-A53 r0p3 and later release, this can be achieved by setting CPUACTLR.ENDCCASCI to 1. This patch is to implement the workaround for this erratum. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10armv8: ls1088 : MC alignment should always be fixed to 512MBAshish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-26Move CONFIG_PANIC_HANG to KconfigMasahiro Yamada
Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-12ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen
And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-12-06armv8: LS1088A_QSPI: SECURE_BOOT: Images validationUdit Agarwal
Validates PPA, MC, DPC, Bootscript, DPL and Kernel images in ESBC phase using esbc_validate command. Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment Add header address for PPA to be validated during ESBC phase for LS1088A platform based on LAyerscape Chasis 3. Moves sec_init prior to ppa_init as for validation of PPA sec must be initialised before the PPA is initialised. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-06armv8: Workaround for USB erratua on LS1012ARan Wang
This is suplement for patch which handle below errata: A-009007, A-009008, A-008997, A-009798 Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-11-15armv8: ls1088: Enable SATA for ls1088Ashish Kumar
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-27arm64: layerscape: Move CONFIG_HAS_FSL_XHCI_USB to KconfigRan Wang
Use Kconfig to select QE-HDLC and USB pin-mux. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-10-09armv8: Apply workaround for USB erratum A-009007 to LS1088ARan Wang
Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-009007Ran Wang
Rx Compliance tests may fail intermittently at high jitter frequencies using default register values. Program register USB_PHY_RX_OVRD_IN_HI in certain sequence to make the Rx compliance test pass. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.bhagat@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-008997Ran Wang
Low Frequency Periodic Signaling(LFPS) Peak-to-Peak Differential Output Voltage Test Compliance fails using default transmitter settings Change config of transmitter signal swings by setting register PCSTXSWINGFULL to 0x47 to pass compliance tests. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-009798Ran Wang
The default setting for USB High Speed Squelch Threshold results in a threshold close to or lower than 100mV. This leads to Receiver Compliance test failure for a 100mV threshold. Shift the threshold from ~100mV towards ~130mV by setting SQRXTUNE to 0x0 to pass USB High Speed Receiver Sensitivity Compliance test. Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: Add workaround for USB erratum A-009008Ran Wang
USB High Speed (HS) EYE Height Adjustment USB HS speed eye diagram fails with the default value at many corners, particularly at a high temperature Optimal eye at TXREFTUNE value to 0x9 is observed, change set the same value. Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [YS: Reordered Kconfig options] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: fsl-layerscape: Support to add RGMII for ls1088aqdsAshish Kumar
This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: ls1088ardb: Add support for LS1088ARDB platformAshish Kumar
LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Disabled NAND in board header file] Reviewed-by: York Sun <york.sun@nxp.com> WIP: disable NAND for LS1088ARDB
2017-09-11armv8: ls1088a: Add NXP LS1088A SoC supportAshish Kumar
LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11armv8: fsl-lsch3: Make CCN-504 related code conditionalAshish Kumar
LS2080 family has CCN-504 cache coherent interconnet. Other SoCs in LSCH3 family may have differnt interconnect. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> [YS: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
2017-09-11LS2080ARDB: QSPI boot: Secure Boot image validationUdit Agarwal
Adds header address for PPA to be validated during ESBC phase for ARCH_LS2088 and QSPI_BOOT. Moves sec_init prior to ppa_init(). It must be initialized before the PPA. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> [YS: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit (git 2.34.1) at 2025-01-04 03:51:43 +0000