summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv8/zynqmp/Kconfig
AgeCommit message (Collapse)Author
2018-03-01mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQVipul Kumar
This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Fix misspelled choice defaultUlf Magnusson
There is no JTAG symbol in the "Boot mode" choice. JTAG_MODE was probably intended. No functional changes. Kconfig choices fall back on using the first (visible) symbol in the choice as the default if the default symbol is not visible. Discovered in Kconfiglib (https://github.com/ulfalizer/Kconfiglib), which prints the following warning: warning: the default selection JTAG (undefined) of <choice> (defined at arch/arm/cpu/armv8/zynqmp/Kconfig:107) is not contained in the choice I've added a corresponding warning to the C tools too, which is currently in linux-next: https://patchwork.kernel.org/patch/9983667/ Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-01-30arm64: zynqmp: Provide a config to not map DDR region in MMU tableSiva Durga Prasad Paladugu
DDR less systems are possible for configuration like mini qspi and making DDR region as normal memory may cause speculative access which results u-boot hang if DDR is absent. So, this patch fixes the issue by not making DDR memory region entry into MMU table. Future solution is to prepare MMU table per memory node in dts instead of hard code DDR addresses. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28arm64: zynqmp: Add SD1 level shifter mode to alternative selectionMichal Simek
Extend Kconfig to cover SD1 level shifter mode. Reported-by: Jason Wu <jason.hy.wu@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28arm64: zynqmp: Enable config DEFINE_TCM_OCM_MMAP if CONFIG_MP definedSiva Durga Prasad Paladugu
This modifies default value of config DEFINE_TCM_OCM_MMAP to yes if CONFIG_MP is defined MP supports needs OCM and TCM part of memory map. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28tools: mkimage: Extend mkimage to also include pmufwMichal Simek
The patch is adding external pmufw "Platform Management Unit firmware" to boot.bin image. Boot.bin is a Xilinx format which bootrom is capable to read and boot the system. pmufw is copied to the header data section follows by u-boot-spl.bin. pmufw is consumed by PMU unit (Microblaze) and SPL runs on a53-0. This is generated command line when PMUFW_INIT_FILE is setup. ./tools/mkimage -T zynqmpimage -R ./"" -n ./"board/xilinx/zynqmp/pmufw.bin" -d spl/u-boot-spl.bin spl/boot.bin Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-11-28arm64: zynqmp: Provide a Kconfig option to use specified memory for MMU tableSiva Durga Prasad Paladugu
This patch provides a Kconfig option to use specified memory for MMU table using reserve_mmu platform specific routine. Here we used TCM space for MMU table. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Add Kconfig option for adding psu_init to binaryMichal Simek
There is a need to include psu_init also in mini u-boot configuration that's why handle psu_init via Kconfig property. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm64: zynqmp: Provide a Kconfig option to define OCM and TCM in MMUSiva Durga Prasad Paladugu
This patch provides an option to include OCM and TCM memory into MMU table with corresponding memory attributes. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-04-08spl: Kconfig: SPL_MMC_SUPPORT depends on GENERIC_MMCAlexandru Gagniuc
spl_mmc.c calls mmc_initialize(). This symbol is provided in drivers/mmc/mmc.c when CONFIG_GENERIC_MMC is enabled. The sunxi Kconfig case is an oddball because it redefines SPL_MMC_SUPPORT. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> [trini: Update arch/arm/cpu/armv8/zynqmp/Kconfig] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-10ARM: zynqmp: Make SYS_VENDOR configurableMike Looijmans
Add a string description for SYS_VENDOR to allow configuring boards from other vendors than just "xilinx". Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-20ARM64: zynqmp: Add missing SPL dependency for boot.bin generationMichal Simek
boot.bin file is generated only when SPL is selected. Reflect this depency in Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02ARM64: zynqmp: List secondary software boot modesMichal Simek
Using alternative bootmode field to support automatic secondary boot modes. It is purely software setting where SW modes are using free bootmode combinations. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-02ARM64: zynqmp: Force certain bootmode for SPLMichal Simek
ZynqMP provides an option to overwrite bootmode setting which can change SPL behavior. For example: boot SPL via JTAG and then SPL loads images from SD. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15tools: mkimage: Add support for initialization table for Zynq and ZynqMPMike Looijmans
The Zynq/ZynqMP boot.bin file contains a region for register initialization data. Filling in proper values in this table can reduce boot time (e.g. about 50ms faster on QSPI boot) and also reduce the size of the SPL binary. The table is a simple text file with register+data on each line. Other lines are simply skipped. The file can be passed to mkimage using the "-R" parameter. It is recommended to add reg init file to board folder. For example: CONFIG_BOOT_INIT_FILE="board/xilinx/zynqmp/xilinx_zynqmp_zcu102/reg.int Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-22ARM64: zynqmp: Force certain bootmode for SPLMichal Simek
ZynqMP provides an option to overwrite bootmode setting which can change SPL behavior. For example: boot SPL via JTAG and then SPL loads images from SD. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-09-16Convert CONFIG_SPL_SPI_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_SPI_FLASH_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_SERIAL_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_MMC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBGENERIC_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBDISK_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_LIBCOMMON_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-09-16Convert CONFIG_SPL_FAT_SUPPORT to KconfigSimon Glass
Move this option to Kconfig and tidy up existing uses. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-07-27zynq: Increase the early malloc() sizeSimon Glass
This is needed to support driver-model conversion of USB and block devices. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-04-04ARM64: zynqmp: Select SYS_CONFIG_NAME via KconfigMichal Simek
This option enable adding new platform suport just by adding defconfig and DTS file which will target generic configuration for SoC. Make no sense to extend Kconfig just create a pointer between DTS and configuration file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27ARM64: zynqmp: Use the same U-Boot version with/without ATFMichal Simek
Remove SECURE_IOU option which is not needed. U-Boot itself can detect which EL level it is on and based on that use do platform setup. It also simplify usage because one Kconfig entry is gone. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19zynqmp: usb: Add usb dwc3 driver support for zynqmpSiva Durga Prasad Paladugu
Added usb dwc3 driver support for zynqmp this also supports the DFU and LTHOR to download the linux images on to RAM and cen be booted from those linux images. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-08-19zynqmp: Enable U-Boot run in EL3Michal Simek
Enable Secure IOU setup to enable U-Boot to run in EL3 without setting from ATF. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28zynqmp: Define ep config for ZynqMPSiva Durga Prasad Paladugu
Define a new config "zynqmp_ep" for ZynqMP instead of xilinx_zynqmp. This defconfig supports all emulation platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP to ARCH_ZYNQMP. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28zynqmp: Kconfig: Move zynqmp KconfigSiva Durga Prasad Paladugu
Move the zynqmp Kconfig from board to arch as there may be different boards under same architecture. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-16 10:16:59 +0000