summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
AgeCommit message (Collapse)Author
2010-10-13orion5x: optimize window size computationAlbert Aribaud
Signed-off-by: Chris Moore <moore@free.fr> Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-10-13Kirkwood: print_cpuinfo fixed for valid devid revidPrafulla Wadaskar
Earlier Device Identification register was used to detect the type for SoC, considering 88F6282 support to be added, It is not possible to detect the same using current algorithm. With this patch, device ID is being read using PCIE devid register, also valid chip revision ID will also be read and displayed Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-10-11orion5x: fix relocation-incompatible codeAlbert Aribaud
Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-10-11arm: bugfix: replace ble with blo in start.S filesAlbert Aribaud
Generalized misuse of ble within relocation and bss initialization loops caused one iteration too many. Instead of ble ('branch if lower or equal'), use blo ('branch if lower'). While we're at it, fix all 'addreee' typos. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-10-11Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk
2010-10-05at91: Add arch_preboot_os which disables PIT in a faster wayAlexander Stein
When disabled the PIT runs until it reaches the CPIV value. The Linux PIT driver stops the PIT and waits until it stopped. This can take over 100ms. Simply stopping in u-boot isn't sufficient as the PIT will still be running when Linux is waiting until it stopped. So, we stop it in u-boot by setting the compare value to a value slightly greater than the current running counter to make the PIT stopped in short time. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
2010-10-05AT91: convert cpu.c to struct SoC accessReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-09-29ARM: Use syslib functions for all CORTEXA8Stefano Babic
The OMAP3 cpu directory contains a syslib file with some utilities that can be shared by all targets using arm cortexa8 processors, not only OMAP. Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-09-28Merge branch 'next' of /home/wd/git/u-boot/nextWolfgang Denk
Conflicts: include/ppc4xx.h Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-28ARMV7: OMAP4: Calculate SDRAM sizeAneesh V
Calculate the SDRAM size from DMM configuration registers instead of using hard-coded values. This gives correct values for all different boards. It's assumed that DMM sections do not overlap memory areas. Signed-off-by: Aneesh V <aneesh@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-28ixp/npe: Remove duplicated commentThomas Weber
Signed-off-by: Thomas Weber <weber@corscience.de>
2010-09-19ARM: implement relocation for arm1176Heiko Schocher
Change the implementation for arm1176 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for arm720tHeiko Schocher
Change the implementation for arm720t to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for arm_intcmHeiko Schocher
Change the implementation for arm_intcm to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for lh7a40xHeiko Schocher
Change the implementation for lh7a40x to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for s3c44b0Heiko Schocher
Change the implementation for s3c44b0 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for sa1100Heiko Schocher
Change the implementation for sa1100 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for ixpHeiko Schocher
Change the implementation for ixp to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for pxaHeiko Schocher
Change the implementation for pxa to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for ARM946Heiko Schocher
Change the implementation for arm946 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for ARM925Heiko Schocher
Change the implementation for arm925 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for ARM920Heiko Schocher
Change the implementation for arm920 to relocate the code to an arbitrary address in RAM. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for ARM926Heiko Schocher
Change the implementation for arm926 to relocate the code to an arbitrary address in RAM. Adapt the TX25 (i.MX25), magnesium board to test the changes. On the tx25 board TEXT_BASE is set to the final relocation address to prevent one more copying of u-boot code when relocating. More info see: doc/README.arm-relocation da850 board: Tested-by: Ben Gardiner <bengardiner@nanometrics.ca> Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca>
2010-09-19ARM: implement relocation for ARM V7 (OMAP)Heiko Schocher
Change the implementation for ARM V7 to relocate the code to an arbitrary address in RAM. Adapt the Beagle board (Cortex A8) to test the changes. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM: implement relocation for ARM11Heiko Schocher
Change the implementation for ARM11 to relocate the code to an arbitrary address in RAM. Tested on the qong board. Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM (ARM11): add data cache support, test on Qong boardHeiko Schocher
Add data cache support for arm1136 systems. Enable "cache" command on Qong board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- QONG (ARM11) 177s 95s 43s = x 4.1 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- QONG (ARM11) 1.54s 0.95s 0.18s = x 8.6 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de>
2010-09-19ARM V7 (OMAP): add data cache support, test on Beagle boardHeiko Schocher
Add data cache support for ARM V7 systems. Used cache flush functions from linux:arch/arm/mm/cache-v7.S developed from Catalin Marinas. Enable "cache" command on Beagle board and test performance. Test 1: Loading 127 MB of data from NAND flash into RAM: Instr. Cache off on on Data Cache off off on -------------------------------------------------- Beagle (Cortex A8) 116s 106s 30.3s = x 3.8 Test 2: uncompressing a gzipped image from RAM to RAM (size compressed: 6.5 MiB, uncompressed: 35 MiB): Instr. Cache off on on Data Cache off off on -------------------------------------------------- Beagle (Cortex A8) 1.84s 1.64s 0.12s = x 15.3 Portions of this work were supported by funding from the CE Linux Forum. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Ben Gardiner<bengardiner@nanometrics.ca>
2010-09-19Prepare v2010.09-rc2Wolfgang Denk
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-10Prepare v2010.09-rc1Wolfgang Denk
Coding style cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-09Merge branch 'master' of git://git.denx.de/u-boot-tiWolfgang Denk
2010-09-08ARMV7: OMAP3: Remove erroneous hard coded sdram setup for 128MB/bankSteve Sakoman
Upcoming Beagle and Overo revisions use POP memory with 256MB or 512MB per bank. This patches uses the SDRC settings from x-load or the config header to set up timing properly. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP3: Fix broken reset command on OMAP36XX/37XX and OMAP4Steve Sakoman
Using the reset command on OMAP36XX/37XX and OMAP4 caused a hang. This patch uses the reset bit appropriate for each CPU architecture. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP3: Apply Cortex-A8 errata workarounds only on affected revisionsMans Rullgard
The workarounds for errata 621766 and 725233 should only be applied on affected Cortex-A8 revisions. Recent chips use r3px cores where these have been fixed. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP3: Convert setup_auxcr() to pure asmMans Rullgard
This function consists entirely of inline asm statements, so writing it directly in a .S file is simpler. Additionally, the inline asm is not safe as is, since registers are not guaranteed to be preserved between asm() statements. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP3: Fix and clean up L2 cache enable/disable functionsMans Rullgard
On OMAP34xx ES1.0, the L2 enable bit can only be set in secure mode, so an SMC call to the ROM monitor is required. On later versions, and on newer devices, this bit is banked and we can set it directly. The code checked only the ES revision of the chip, and hence incorrectly used the ROM call on ES1.0 versions of other devices. This patch adds a check for chip family as well as revision, and also removes some code duplication between the enable and disable functions. Signed-off-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP3: Add clock setup for OMAP36XX/37XXSteve Sakoman
This patch configures clocks properly when a 36XX/37XX processor is detected. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP3: Update CPU type detection for AM35XX/OMAP36XX/37XXSteve Sakoman
TI has added new processors to the OMAP3 family. This patch enhances the code in sysinfo.c to detect which family member is present. Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08ARMV7: OMAP: Move syslib.c to omap-common since it can be shared by OMAP3 ↵Steve Sakoman
and OMAP4 The functions in syslib.c can be shared, so this patch moves it from cpu/omap3 to cpu/omap-common Signed-off-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2010-09-08Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk
2010-09-08Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk
2010-09-03AT91: add option to enable pullups in at91sam9260_devices.cReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-09-03AT91: reset.c: fix comments, add optionReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-09-03AT91SAM9XE: add embedded flash supportReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-09-03AT91: MCI: add SD/MMC driver using mmc frameworkReinhard Meyer
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-08-31AT91 Fix: return value of get_tbclkJens Scharsig
* Fix: return value of get_tbclk * this fixes issue with prematurely restart/retry, if BOOT_RETRY_TIMEOUT is used Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
2010-08-30ARMV7: S5P: separate the peripheral clocksMinkyu Kang
Because of peripheral devices can select clock sources, separate the peripheral clocks. (pwm, uart and so on) It just return the pclk at s5pc1xx SoC, but s5pc210 SoC must be calculated by own clock register setting. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-08-26Kirkwood: bugfix: window size (mis)calculationPrafulla Wadaskar
Fixed kw_winctrl_calcsize() off-by-1 bug which caused mapping windows size to be cut by half. This corrected all windows address configuration Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
2010-08-26Orion5x: bugfix: window size (mis)calculationAlbert Aribaud
Fix orion5x_winctrl_calcsize() off-by-1 bug which caused mapping windows to be cut by half. This afected all windows including NOR flash (causing half the flash to be unaccessible) but DRAM was and still is fine as its size is determined otherwise. Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
2010-08-23ARMV7: S5P: rename from s5pc1xx to s5pMinkyu Kang
Because of these are common files around s5p Socs, rename from s5pc1xx to s5p. And getting cpu_id is SoC specific, so move to SoC's header file. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2010-08-23ARMV7: S5P: make s5p-common for sharing the code between s5pc1xx and s5pc2xxMinkyu Kang
This patch adds basic support for s5pc210. s5p-common will be used by all of s5p SoCs. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
generated by cgit (git 2.34.1) at 2024-12-26 06:29:49 +0000