Age | Commit message (Collapse) | Author |
|
Synchronize R-Car Gen3 device trees with Linux 5.6.2,
commit 9fbe5c87eaa9b72db08425c52c373eb5f6537a0a .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Backport and squash below Linux 5.2 commits for R-Car Gen3:
Commit id * Summary line
6fffb98645e67b5 arm64: dts: renesas: r8a77990: ebisu: Add GPIO expander
b068ed6efe6244d arm64: dts: renesas: r8a77990: Fix SPDX license identifier style
96c25882252704d ! arm64: dts: renesas: r8a7796: remove unneeded sound #address/size-cells
71ac75dffdae2f8 arm64: dts: renesas: r8a77990: ebisu: Enable LVDS1 encoder
9a0ff5c727b60a3 arm64: dts: renesas: r8a77995: draak: Enable LVDS1 encoder
9130c15829846fa arm64: dts: renesas: ebisu: Fix adv7482 hexadecimal register address
191f7dcd1f5ea1f arm64: dts: renesas: r8a77965: add SSIU support for sound
a8f6110e64422d5 arm64: dts: renesas: ebisu: Enable VIN5
4162aa9db3d4469 arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1
af965ba3248edde arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40
1f4c123a98098cc arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC
474706117c2baa6 arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
e2fa79de7ecbef4 arm64: dts: renesas: Update Ebisu and Draak bootargs
de8e8daaf7190ef arm64: dts: renesas: salvator-common: Sort node label
05f1d882d28b871 arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii
7a516e49d975311 arm64: dts: renesas: use extended audio dmac register
e3414b8c45afa5c arm64: dts: renesas: salvator-common: Add GPIO keys support
720066d17c973fd arm64: dts: renesas: r8a7795: Add CMT device nodes
99cb95103e2d058 arm64: dts: renesas: r8a77965: Add CMT device nodes
28a5c61b5136d58 arm64: dts: renesas: r8a77990: Add CMT device nodes
32d622f3290b2a1 arm64: dts: renesas: r8a77965: Remove reg-names of display node
(*) Patch id mismatch between Linux and U-Boot commit.
[!] Dropped changes in arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts,
since the file doesn't exist in the U-Boot tree.
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
|
|
Synchronize R-Car Gen3 device trees with Linux 5.0,
commit 1c163f4c7b3f621efff9b28a47abb36f7378d783 .
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Synchronize DTs with mainline Linux 4.19.6 ,
commit 96db90800c06d3fe3fa08eb6222fe201286bb778
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
|
|
The SDHI nodes are missing features supported in upstream U-Boot,
like mode support properties. Pull the extras into U-Boot specific
DT until it hits mainline Linux, to make syncing of DTs easier.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
|
|
Enable the HS400 support in DT on H3, M3W, M3N Salvator-X(S)
and ULCB boards as well as E3 Ebisu board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Enable SDR104 modes on M3W and H3 boards. With the SDHI fixes
in place, it is now possible to use SDR104.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Add pinmux entry for the eMMC DS line, as it is connected on these boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Sync the DTs with Linux v4.17.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
This patch got dropped during the update of DTs to 4.14, re-add it
back. This adds reset GPIOs to the ethernet PHYs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.14,
commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . This includes both M3
and H3 ULCB and Salvator-X boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
The eMMC is 1V8 device only and the signaling is always 1V8,
fix the DT for Salvator-X/XS to describe the hardware correctly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Add DT nodes to enable SDR104/HS200 modes on Salvator-X boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
The PHY reset GPIOs were missing from the DT, add them.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.13,
commit 569dbb88e80deb68974ef6fdd6a13edb9d686261 . This includes both M3
and H3 ULCB and Salvator-X boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|