summaryrefslogtreecommitdiff
path: root/arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
AgeCommit message (Collapse)Author
2020-02-13ARM: dts: stm32m1: add reg for pll nodesPatrick Delaunay
Fix the following DT dtc warnings for stm32mp1 boards: Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@1: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@2: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/rcc@50000000/st,pll@3: node has a unit name, but no reg property Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32mp1: move FDCAN to PLL4_RAntonio Borneo
LTDC modifies the clock frequency to adapt it to the display. Such frequency change is not detected by the FDCAN driver that instead cache the value at probe and pretend to use it later. Keep the LTDC alone on PLL4_Q by moving the FDCAN to PLL4_R. Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1Patrick Delaunay
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1. - update slew-rate for pin configuration - update "vqmmc-supply" - remove "st,sig-dir" - add mandatory "pinctrl-names" - add "mmc-ddr-3_3v" This patch solve the eMMC detection issue for command "mmc dev 1". Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-06-06board: stm32mp1: Add Avenger96 board supportManivannan Sadhasivam
Add support for Avenger96 board from Arrow Electronics based on STM32MP157 MPU. This board is one of the Consumer Edition (CE) boards of the 96Boards family and has the following features: SoC: STM32MP157AAC PMIC: STPMIC1A RAM: 1024 Mbyte @ 533MHz Storage: eMMC v4.51: 8 Gbyte microSD Socket: UHS-1 v3.01 Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac Bluetooth®v4.2 (BR/EDR/BLE) USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4 LED: 4x User LED, 1x WiFi LED, 1x BT LED More information about this board can be found in 96Boards website: https://www.96boards.org/product/avenger96/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>