summaryrefslogtreecommitdiff
path: root/arch/arm/dts/stm32mp157c-ed1.dts
AgeCommit message (Collapse)Author
2020-06-16dts: ARM: stm32mp15: add OP-TEE node in u-boot DTSIEtienne Carriere
Add OP-TEE firmware node in stm32mp15 U-Boot DTSI. This node is needed since commit [1] that changed U-Boot/stm32mp15 to detect OP-TEE availability by probing the resource instead of relying on U-Boot configuration. The software sequence implemented by [1] is fine but U-Boot DTS/DTSI files were not updated accordingly since, hence OP-TEE presence is never detected by U-Boot, preventing Linux kernel from using OP-TEE resources. For consistency and to synchronize stm32mp15 DTSI files (excluding U-Boot specific DTSI files) with the Linux kernel ones, this change also moves the OP-TEE reserved memory nodes from board generic DTSI files to U-Boot specific board DTSI files. Link: [1] commit 43df0a159df6 ("stm32mp1: dynamically detect op-tee presence") Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14ARM: dts: stm32mp1: DT alignment with Linux 5.7-rc2Patrick Delaunay
DT alignment with Linux 5.7-rc2, including the kernel commits 431c89e6f323 ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards 79e965053872 ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards 877db62ea516 ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards 7519e95ba5f8 ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards f68e2dbc591a ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 d6210da4f8bf ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x b65b6fc56925 ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c 1c1cf5996cfb ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 bef15fc0fad9 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 b7fc0a87b9ac ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx a5e557655285 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards 8bc631b650a6 ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 fccd6a577bb3 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board cc775a83db65 ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 c5fae093511b ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 9879e2165758 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 82ac8a81f985 ARM: dts: stm32: add USB OTG full support on stm32mp151 8714b26e2863 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node a7959919709e ARM: dts: stm32: Add UART8 pins A pinmux entry on stm32mp1 4d7c53a684da ARM: dts: stm32: Add USART3 pins A pinmux entry on stm32mp1 80ab128332ee ARM: dts: stm32: Add SAI2A pins B pinmux entry on stm32mp1 ab7f98c0c546 ARM: dts: stm32: Add Ethernet0 RMII pins A pinmux entry on stm32mp1 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-05-14board: stm32mp1: reserve memory for OP-TEE in device treePatrick Delaunay
Add reserve memory for OP-TEE in U-Boot and in kernel device tree: - no more reduce the DDR size in "memory" node: CONFIG_SYS_MEM_TOP_HIDE is no more used - U-Boot device-tree defines the needed "reserved-memory" for OP-TEE and U-Boot should not use this reserved memory: board_get_usable_ram_top use lmb lib to found the first free region, the not reserved memory, enough to relocate U-Boot: the needed size of U-Boot is estimated with gd->mon_len + CONFIG_SYS_MALLOC_LEN. - the optee node ("optee@...": firmware with compatible "linaro,optee-tz") and the associated "reserved-memory" are deactivated in kernel device tree when OP-TEE is not detected by U-Boot to prevent kernel issue (memory is reserved but not used, optee driver probe failed). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-03-24ARM: dts: stm32mp1: DT alignment with Linux 5.6-rc1Patrick Delaunay
This commit manages diversity for STM32M15x SOCs with: - dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. - new files to manage security diversity on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information: -Y = A means no cryp IP and no secure boot. -Y = C means cryp IP + secure boot. - stm32mp157 pinctrl files to better manage package diversity. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Acked-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13ARM: dts: stm32mp1: DT alignment with kernel v5.5-rc7Patrick Delaunay
Device tree and binding alignment with kernel v5.5-rc7 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-02-13stm32mp1: pwr: use the last binding for pwrPatrick Delaunay
Update the driver to use the latest binding from kernel v5.5-rc1: no more use syscon or regmap to access to pwr register and only one pwr_regulators node with the compatibility "st,stm32mp1,pwr-reg" is available. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26ARM: dts: stm32: update eMMC configuration for stm32mp157c-ev1Patrick Delaunay
Update the sdmmc2 node for eMMC support on eval board stm32mp157c-ev1. - update slew-rate for pin configuration - update "vqmmc-supply" - remove "st,sig-dir" - add mandatory "pinctrl-names" - add "mmc-ddr-3_3v" This patch solve the eMMC detection issue for command "mmc dev 1". Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-11-26ARM: dts: stm32: DT alignment with kernel v5.4-rc4Patrick Delaunay
Device tree and binding alignment with kernel v5.4-rc4 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-11-26ARM: dts: stm32: DT alignment with kernel v5.3Patrick Delaunay
Device tree and binding alignment with kernel v5.3 and converted to SPDX. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-08-27stm32mp1: Add remoteproc support for m4 coprocessorPatrick Delaunay
Alignment with kernel patch proposal for binding: [PATCH v4 0/8] stm32 m4 remoteproc on STM32MP157c https://lkml.org/lkml/2019/5/14/159 Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27stm32mp1: board: Update the way vdd-supply is retrieved from DTPatrick Delaunay
Due to kernel DT alignment, pwr-supply is renamed to vdd-supply and is a subnode of pwr-regulators. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-08-27ARM: dts: stm32mp1: sync device tree with v5.3-rc2Patrick Delaunay
Synchronize device tree with v5.3-rc2 label and update the associated u-boot dtsi. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-07-12ARM: dts: stm32mp1: sync device tree with v5.2-rc4Patrick Delaunay
Synchronize device tree with v5.2-rc4 label and update the associated u-boot dtsi. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
2019-07-12ARM: dts: stm32: Add ipcc mailbox support on stm32mp1Fabien Dessenne
Add IPCC mailbox support on stm32mp157 eval and disco boards. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-24Merge tag 'u-boot-stm32-mcu-20190423' of https://github.com/pchotard/u-bootTom Rini
STM32 MCUs update: - DT rework and alignment with DT kernel v4.20 - mmc: arm_pl180_mmci: Synchronize compatible with kernel v4.20 - mmc: stm32_sdmmc2: Synchronize properties with kernel v4.20 - configs: update for F746/769 boards
2019-04-23ARM: dts: stm32: Update sdmmc binding for stm32mp157c-ed1Patrice Chotard
Update some sdmmc properties which have been updated with v4.19 DT bindings: - st,dirpol becomes st,sig-dir - st,negedge becomes st,neg-edge - st,pin-ckin becomes st,use-ckin Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-21phy: usbphyc: Binding update of vdda supplyPatrick Delaunay
Move supply vdda1v1 and vdda1v8 in usbphyc node and no more in port Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-04-12ARM: dts: stm32: Synchronize DT with kernel onePatrice Chotard
This patch synchronizes U-boot DT with kernel one This is based on https://patchwork.kernel.org/cover/10797115/ This patch adds initial support of STM32MP157 discovery boards: - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1). This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Several connections are available on this boards: 4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ... - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2). This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a) and Murata wifi/BT combo is added. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2019-04-12power: rename stpmu1 to official name stpmic1Patrick Delaunay
Alignment with kernel driver name & binding introduced by https://patchwork.kernel.org/cover/10761943/ to use the final marketing name = STPMIC1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2019-04-12power: stpmu1: rename files to stpmic1Patrick Delaunay
Prepare file modification for kernel alignment and rename driver to stpmic1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-12-06pinctrl: stm32: make pinctrl use hwspinlockBenjamin Gaignard
Protect configuration registers with a hardware spinlock. If a hwspinlock is defined in the device-tree node used it to be sure that none of the others processors on the SoC could change the configuration at the same time. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-12-06hwspinlock: add stm32 hardware spinlock supportBenjamin Gaignard
Implement hardware spinlock support for STM32MP1. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2018-10-10ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1Patrice Chotard
Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-07-20dts: import stm32mp1 device tree from linux kernelPatrick Delaunay
This patch rebase the stm32mp1 device tree source from linux kernel v4.18-rc1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-05-08ARM: dts: stm32mp157c-ed1: Add regulator nodePatrice Chotard
Add regulator nodes needed by stpmu1 regulator driver Add vmmc-supply and vqmmc-supply regulator property for sdmmc1 and sdmmc2. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-04-06stm32mp1: add eMMC support for ED1Patrick Delaunay
Add command GPT support Add EMMC boot support Add the 2 other SDMMC instances for ED1: - SDMMC2 = mmc 1, eMMC on the ED1 board - SDMMC3 = extension connector, deactivated by default Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-03-19dts: add device tree for STM32MP157C-ED1 boardPatrick Delaunay
Add minimal devicetree for STM32MP157C-ED1 board, with only the devices to allow boot from SDCARD: - RCC for clock and reset - UART4 for console - I2C and PMIC - DDR - SDMMC0 for SDCard Waiting Kernel upstream for alignment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
generated by cgit (git 2.34.1) at 2025-02-03 21:54:53 +0000