summaryrefslogtreecommitdiff
path: root/arch/arm/dts/zynq-7000.dtsi
AgeCommit message (Collapse)Author
2018-05-07SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-01-30arm: zynq: Fix pmu register description coding styleMichal Simek
Drop the space before/after '<' and '>'; and separate the entries to be a bit more readable. Reported-by: Julia Cartwright <julia@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-11-28arm: zynq: Sync location of DT properties with LinuxMichal Simek
This is trival change which only ensures the same location with Linux kernel. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-08-02arm: zynq: Label whole PL part as fpga_full regionMichal Simek
This will simplify dt overlay structure for the whole PL. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
2017-02-17zynq: Move zynq to clock frameworkStefan Herbrechtsmeier
Move the zynq to clock framework and remove unused functions as well as the CONFIG_ZYNQ_PS_CLK_FREQ configuration. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2017-01-10ARM: zynq: Remove spi-max-frequencyMichal Simek
spi-max-frequency for spi bus depends on devices which are connected to it. Remove this parameter from dtsi file. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-12-20ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.Moritz Fischer
By adding labels to the cpu nodes in the dtsi, a dts that includes it can change the OPPs by referencing the cpu0 through the label. [Based on linux (400b6a0cbef55d1ae32808eaa1ef1c28820bf6ac)] Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: u-boot@lists.denx.de Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-11-15ARM: zynq: Remove DTC 1.4.2 warningsMichal Simek
DTC 1.4.2 reports these warnings: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name, but no reg property This patch is fixing them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-05-24ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-busMasahiro Yamada
Commit 9f56917ab88a ("dm: core: make simple-bus compatible to simple-mfd") made possible to import the following commit: Linux commit: bc5ba9b98435bf76d92e0954da1784695aa449f1 The SLCR (System-Level Control Registers) block is an MFD (Multi Function Device) rather than a bus. "simple-mfd" seems a more suitable compatible string than "simple-bus". Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Align devcfg nodeMichal Simek
- Have compatible string as the first property - Sync with Linux kernel dtsi - Add missing interrupt properties Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: dts: Updated devicetree bindings for Zynq 7000 platformMoritz Fischer
Added addtional bindings required for FPGA Manager operation of the Xilinx Zynq Devc configuration interface. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.Moritz Fischer
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Add interrupt-controller property to gpio nodesMichal Simek
GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-01-27ARM: zynq: Clean DTSI coding styleMichal Simek
Fix minor indentation problems. Signed-off-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-04arm: zynq: dts: Add U-Boot device tree additionsSimon Glass
We need to mark some device tree nodes so that they are available before relocation. This enables driver model to find these automatically. In the case of SPL it ensures that these nodes will be retained in SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-10-25dts: zynq: Add zynq qspi controller nodesJagan Teki
This patch adds zynq qspi controller nodes in zynq-7000.dtsi. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: Simon Glass <sjg@chromium.org> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
2015-07-28ARM: zynq: DT: Add missing interrupt for L2 pl310Michal Simek
Add pl310 interrupt to the Zynq devicetree. Signed-off-by: Alex Wilson <alex.david.wilson@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Get rid of ps-clk-frequencyMichal Simek
ps-clk-frequency is platform specific setting and shouldn't be the part of DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Update years in copyrightMichal Simek
Trivial. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Add reference to bus nodeMichal Simek
For adding OCM memory in platform DTS is necessary to have reference to amba bus. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Add pinctrl nodeMichal Simek
Add pinctrl node to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Cleanup address-cells and size-cellsMichal Simek
Remove unneeded address-cells form intc node because it is already setup in parent node. Add missing address-cells and size-cells to eth node to be shared for every platform DTSes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Clean up timer device tree nodesMichal Simek
Separate IRQ cells from each other for easier reading. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Use the zynq binding with macbMichal Simek
Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Also allow the compatible cadence gem binding that won't disable half duplex but works otherwise. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Fix GEM register area sizeMichal Simek
The size of the GEM's register area is only 0x1000 bytes. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28spi: Fix zynq SPI bindingMichal Simek
Zynq is using Cadence IP where binding is documented in the Linux kernel and there is no reason to use different binding. Synchronize it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Remove 222 MHz OPPMichal Simek
Due to dependencies between timer and CPU frequency, only changes by powers of two are allowed. The clocksource driver prevents other changes, but with cpufreq and its governors it can result in being spammed with error messages constantly. Hence, remove the 222 MHz OPP. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Migrate UART to Cadence bindingMichal Simek
The Zynq UART is Cadence IP and the driver has been renamed accordingly. Migrate the DT to use the new binding for the UART driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Add a fixed regulator for CPU voltageMichal Simek
To silence the warning cpufreq_cpu0: failed to get cpu0 regulator: -19 from the cpufreq driver regarding a missing regulator, add a fixed regulator to the DT. Zynq does not support voltage scaling and the CPU rail should always be supplied with 1 V, hence it is added in the SOC-level dtsi. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Add missing nodes to DTSIMichal Simek
Add ADC, CAN, GPIO, MC, DMA, DEVCFG, USB, Watchdog IPs to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28ARM: zynq: DT: Use the right names for nodesMichal Simek
Based on SPEC you right names with addresses. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-01spi: zynq_spi: Add fdt support in driverJagan Teki
Now zynq spi driver platform data is controlled by devicetree, enable the status by saying "okay" on respective board dts to use the devicetree generated platdata. Ex: &spi1 { status = "okay"; }; Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
2015-07-01dts: zynq: Add zynq spi controller nodesJagan Teki
This patch adds zynq spi controller nodes in zynq-7000.dtsi. Signed-off-by: Jagan Teki <jteki@openedev.com> Acked-by: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Tested-by: Jagan Teki <jteki@openedev.com>
2014-05-15zynq: import zynq-7000.dtsi from Linux KernelMasahiro Yamada
Our current motivation is to use OF initialization for RAM and UART. But adding full DTS would be helpful in future, for instance, for OF configuration of Ethernet, MMC, USB, etc. This commit imports arch/arm/boot/dts/zynq-7000.dtsi from Linux 3.15-rc5 and adjusts the license comment block for SPDX. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-01-10dts: zynq: Add basic fdt supportJagannadha Sutradharudu Teki
This patch provides a basic fdt support for zynq u-boot. zynq-7000.dtsi-> initial arch dts file zynq-zed.dts -> initial zed board dts file more devices should be added in subsequent patches. u-boot build: once configuring of a board done for building dtb with zynq-zed.dts as an input zynq-uboot> make DEVICE_TREE=zynq-zed Enabled CONFIG_OF_SEPARATE for building dtb separately. There is a new binary called u-boot-dtb.bin which is a u-boot with devicetree supported. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
generated by cgit (git 2.34.1) at 2024-12-29 20:05:17 +0000