summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-06-27arm: dts: imx7: sync with LinuxStefan Agner
Sync with Linux commit 60cc43fc8884 ("Linux 4.17-rc1"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-06-23ARM: dts: uniphier: enable SD card for PXs3 reference boardMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-23ARM: dts: uniphier: sync DT with Linux 4.18-rc1Masahiro Yamada
Now that the clock-frequency information has been moved to the driver, more DT sync is possible. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-21Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-19configs: dragonboard410c: remove env partition offsetRamon Fried
BOOT2 is not partitioned, no need for partition offset. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-19ARM: dts: rmobile: Add HS200 support to E3 EbisuMarek Vasut
Add regulator nodes and pinmux settings to the SDHI3 on E3 Ebisu and enable HS200 mode on it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-19ARM: dts: rmobile: Move the PHY reset GPIOs into PHY nodesMarek Vasut
Both the RAVB and SH ether driver now support parsing the PHY reset GPIOs from both the PHY nodes and the MAC nodes, move the reset GPIOs back into the PHY nodes to minimize DT difference between U-Boot and Linux. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-19ARM: dts: rmobile: Move the PHY reset GPIO backMarek Vasut
The current state of RAVB driver expects the PHY reset GPIO in the RAVB mode, move it back from the PHY node to avoid breakage. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-18.gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignoreMasahiro Yamada
Follow Linux commit 10b62a2f785a (".gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore"). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-06-18db410c: fix alignment of dts fileRamon Fried
Alignment was wrong, missing one tab. fix it. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-18board: Add support for KEY1 status detection on K+P's HSC|DDC boardsLukasz Majewski
This code provides information if the K+P's imx53 boards had KEY1 pressed. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-18board: imx53: Always disable display before starting kernelLukasz Majewski
This patch prevents from the situation where we may end up with garbage displayed on the LCD panel. Such situation occurs when one performs "reboot -f" in Linux and then stop in U-boot (or observe the garbage on the screen during boot up). To prevent from such situation - the PWM pin is configured as GPIO and set to LOW. Signed-off-by: Lukasz Majewski <lukma@denx.de>
2018-06-17Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-16sun50i: h5: Add initial Orange Pi Zero Plus supportHauke Mehrtens
Orange Pi Zero Plus is an open-source single-board computer using the Allwinner H5 SOC. H5 Orangepi Zero Plus has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot - 16MBit SPI Nor flash - Debug TTL UART - 1GBit/s Ethernet (RTL8211E) - Wifi (RTL8189FTV) - USB 2.0 Host - USB 2.0 OTG + power supply The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-16sun8i: h2: Add initial Orange Pi R1 supportHauke Mehrtens
Orange Pi R1 is an open-source single-board computer using the Allwinner H2+ SOC. H2+ Orange Pi R1 has - Quad-core Cortex-A7 - 256MB DDR3 - micrSD slot - 128MBit SPI Nor flash - Debug TTL UART - 100MBit/s Ethernet (H2+) - 100MBit/s Ethernet (RTL8152B) - Wifi (RTL8189ETV) - USB 2.0 OTG + power supply This board is very similar to the Orange Pi Zero. The device tree file is copied from the Linux kernel 4.17. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-06-16ARM: dts: rmobile: Add AVB PHY reset on V3M EagleMarek Vasut
Add EtherAVB PHY reset on V3M Eagle to let the AVB driver unreset the PHY. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-16ARM: dts: rmobile: Add AVB pinmux on V3M EagleMarek Vasut
Add EtherAVB pinmux node on V3M Eagle to set the pinmux configuration. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-16ARM: dts: rmobile: Enable SDHI on E3 EbisuMarek Vasut
Enable SDHI on R8A77990 E3 Ebisu in DT. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-16ARM: dts: rmobile: Add initial SDHI nodes to R8A77990 E3Marek Vasut
Add SDHI nodes to R8A77990 E3 SoC to allow SDHI operation. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-16ARM: dts: rmobile: Add SCIF2 pinmux to E3 EbisuMarek Vasut
Add SCIF2 pinmux nodes to R8A77990 E3 Ebisu. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-16ARM: dts: rmobile: Add Renesas RPC HF/QSPI DT node to R8A77990Marek Vasut
Add device tree nodes for the Renesas RPC HF/QSPI controller to R8A77990 E3. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-15arm: zynq: Drop #address-cells and #size-cells from gpio-keysMichal Simek
dtc is showing some warnings and this change was also done in the Linux kernel as "Input: gpio-keys - clean up device tree binding example" with this fragment in commit message "Drop #address-cells and #size-cells, which are not required by the gpio-keys binding documentation, as button sub-nodes are not devices." Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-15arm64: zynqmp: Split emmc configuration into emmc0 and emmc1Siva Durga Prasad Paladugu
This patch splits the current mini emmc configuration into emmc0 and emmc1 configurations because emmc is probed at boot time and on systems which have only one interface mini configuration is failing on unused interface. This patch also adds required clock node in dts and enables CONFIG_MMC_SDHCI_ZYNQ through defconfig. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-06-14ARM: rmobile: Sync Gen3 DTS with Linux v4.17Marek Vasut
Sync the DTs with Linux v4.17. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-14ARM: rmobile: Sync Gen2 DTS with Linux v4.17Marek Vasut
Sync the DTs with Linux v4.17. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-13ARM: DTS: resync a3517.dtsi with Linux 4.17Adam Ford
Linux 4.17 was just released with some minor changes to the am3517.dtsi. This patch re-syncs the file. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-06-13ARM64: meson: Sync DT with Linux 4.17Neil Armstrong
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.0 This will enable USB on Amlogic Meson GXL Boards like Khadas VIM, P212 or LibreTech-CC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-06-12Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-06-12arm: mvebu: Add Helios4 Armada 38x initial supportDennis Gilmore
The helios4 is built on the SolidRun Armada 38x SOM. The port os based on the ClearFog board, using information from https://github.com/helios-4/u-boot-marvell as well as dtb input from https://github.com/helios-4/linux-marvell Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-11board: ls1012a: FRWY-LS1012A board supportBhaskar Upadhaya
FRWY-LS1012A belongs to LS1012A family with features 2 1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, QuadSPI, Audio, UART. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> [yorks: rebase and fix SPDX tag] [yorks: fix board/freescale/ls1012afrdm/Kconfig] Reviewed-by: York Sun <york.sun@nxp.com>
2018-06-06Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2018-06-05ARM: add SBx81LIFKW boardChris Packham
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GS24a, SBx81XS6, SBx81XS16 and SBx81GT40 cards collectively referred to as SBx81LIFKW in u-boot. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05arm: kirkwood: lsxl: Add SPI driver model supportMichael Walle
This patch shows how to enable driver model support for the LS-CHLv2 and LS-XHL boards. There are a couple of open questions: - do I need the u-boot,dm-pre-reloc tags in the device tree? - should mach/config.h define CONFIG_DM_SEQ_ALIAS? - how can we split this patch or are there any other pending patches which does the same and I didn't catch these. This patch is based on the http://git.denx.de/u-boot-marvell.git (master branch) and needs the following patches, which are still pending: https://patchwork.ozlabs.org/patch/909618/ https://patchwork.ozlabs.org/patch/909617/ https://patchwork.ozlabs.org/patch/909973/ Signed-off-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05arm: mvebu: switch clearfog to use device-tree i2c and gpioJon Nettleton
This switches the clearfog boards to use DM based gpio and i2c drivers. The io expanders are configured via their device-tree entries. Signed-off-by: Jon Nettleton <jon@solid-run.com> [baruch: add DT i2c aliases] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-04db410c: Added pre-relocation attribute to pinctrlRamon Fried
u-boot,dm-pre-reloc was missing from pinctrl and it's children node. causing failure to configure pin mux before relocation. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-06-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-06-04board: sun50i: Add Amarula A64-Relic initial supportJagan Teki
Amarula A64-Relic is A64 based IoT device, which support - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 1GB DDR3 RAM - 8GB eMMC - AP6330 Wifi/BLE - MIPI-DSI - CSI: OV5640 sensor - USB OTG - 12V DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-06-02Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-06-01Merge tag 'xilinx-for-v2018.07-2' of git://www.denx.de/git/u-boot-microblazeTom Rini
Xilinx changes for v2018.07 second pull zynqmp: - Show reset reason - Remove emulation platform - Update pmufw version - Simplify mmc bootmode - Remove dc2 useless configuration file - Cleanup mini config - Defconfig syncup - zcu100, zcu104 and zcu111 dts fixes xilinx: - Use live-tree functions in some drivers - Add support for Avnet Minized and Antminer S9 fpga: - Add secure bitstream loading support mmc: - Add hs200 mode support usb xhci: - Header fix
2018-06-01ARM: dts: rmobile: Sync R8A77990 Ebisu DTS with LinuxMarek Vasut
Import the R8A77990 and Ebisu DTS from linux-next to get the latest version. This makes AVB ethernet work in U-Boot since the ethernet node is now present in DT, as well as GPIOs. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: renesas: Add R8A77990 E3 Ebisu boardMarek Vasut
Add support for the R8A77990 Ebisu board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: dts: rmobile: Add Renesas Ebisu board supportTakeshi Kihara
Basic support for the Renesas Ebisu board based on R-Car E3: - Memory, - Main crystal, - Serial console, Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [shimoda: rebase and add SPDX-License-Identifier] Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-06-01ARM: dts: rmobile: Add Renesas R8A77990 SoC supportYoshihiro Shimoda
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC: - PSCI - CPU (single) - Cache controller - Main clocks and controller - Interrupt controller - Timer - PMU - Reset controller - Product register - System controller - UART for console Inspried by a patch by Takeshi Kihara in the BSP. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-05-31arm64: zynqmp: Add TTC clocksRajan Vaja
PS clock(LPD_APB_CLK) is default clock for TTC. Add this clock entry in TTC nodes. Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Disable WP on zcu111Michal Simek
On this board there is SD slot without WP connected. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Remove broken-cd from zcu100-revCMichal Simek
Card detect bit was broken on revA and it is working fine with revC board that's why this property can be removed. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Fix address for tca6416_u97 chip on zcu104Michal Simek
I2c address is not 0x21 but 0x20. This patch is fixing both revA and revC boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm64: zynqmp: Add ina226 to zcu104 revCMichal Simek
Add new ina226 chip present on i2c bus which wasn't on revA. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm: zynq: Add support for Bitmain Antminer S9 control boardEzequiel Garcia
This is control board on Bitmain Antminer S9. There are 3 board variables with 256MB, 512MB and 1024MB DDR. DDR memory is automatically detected with using get_with using get_ram_size(). Bitmain is using 16MB space for FPGA which is handled via reserved-memory. Also U-Boot is allocating 16B for storing bootcounts. Watchdog is started but never service in U-Boot. SPL MMC is working. SPL NAND is not working because it is not supported as of now. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-05-31arm: zynq: Add initial support for Avnet MiniZedIbai Erkiaga
Initial support for Avnet MiniZed board. Tested UART1 (serial console), QSPI(Flash), SDHCI1 (eMMC), USB. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-01 10:20:31 +0000