summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-08-01binman: Rename 'position' to 'offset'Simon Glass
After some thought, I believe there is an unfortunate naming flaw in binman. Entries have a position and size, but now that we support hierarchical sections it is unclear whether a position should be an absolute position within the image, or a relative position within its parent section. At present 'position' actually means the relative position. This indicates a need for an 'image position' for code that wants to find the location of an entry without having to do calculations back through parents to discover this image position. A better name for the current 'position' or 'pos' is 'offset'. It is not always an absolute position, but it is always an offset from its parent offset. It is unfortunate to rename this concept now, 18 months after binman was introduced. However I believe it is the right thing to do. The impact is mostly limited to binman itself and a few changes to in-tree users to binman: tegra sunxi x86 The change makes old binman definitions (e.g. downstream or out-of-tree) incompatible if they use the 'pos = <...>' property. Later work will adjust binman to generate an error when it is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-27Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-07-26tegra: beaver/apalis: Fix DTC warningTom Warren
Fix warning when compiling tegra30-beaver/-apalis.dts with latest DTC: "Warning (avoid_unnecessary_addr_size): /pci/pch@1f,0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property" Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-07-26armv8: dts: fsl-ls1012a: add sata node supportYuantian Tang
One ls1012a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization. Add sata node to support this feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-25ARM: dts: socfpga: Adjust NAND register layout on Arria10Marek Vasut
Adjust the NAND register size on Arria10 to reflect reality. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-07-23ARM: DTS: am3517-evm-u-boot: Mark MMC1 with cd-invertedAdam Ford
In order to use the device tree for MMC, the card-detect pin needs to be inverted. This patch places this into the am3517-evm-u-boot.dtsi file to keep the main DTS and DTSI files clean and in-sync with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: dts: am3517-evm-uboot: Add reg-shift for UARTAdam Ford
With the resync of the omap3.dtsi file, the reg-shift was removed so it breaks the UART. Adding the reg-shift into the am3517-evm-u-boot.dtsi keeps the reg-shift for U-Boot, but keeps the dts/dtsi files clean from Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync Logic PD SOM-LV 37xx devkit with Linux 4.18-RC4Adam Ford
There have been some significant changes to the DM37 SOM-LV device tree. This patch re-syncs it with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.18-RC4Adam Ford
There have been some refactoring of the DTS files for the Logic PD DM37 Torpedo. This patch re-sync's the DTS files with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4Adam Ford
There have been several minor changes to the OMAP3.dtsi, so this patch re-syncs it with Linux. An addition include/dt-binding was also brought with it. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync am3517-evm.dts with Linux 4.18-rc4Adam Ford
Several changes have been made to the AM3517-evm and the underlying am3517.dtsi file. This patch re-sync's the DTS and DTSI files with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23board: toradex: add Colibri iMX6ULL supportStefan Agner
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23ARM: dts: imx6ull: use same compatible string as Linux is usingStefan Agner
The GPMI NAND IP seems to be the same as used in i.MX 6Quad. Use the fsl,imx6q-gpmi-nand compatible string like Linux devices trees are. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-20ARM64: meson: Sync DT with Linux 4.17.5Loic Devulder
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.5 (Linux commit 54fb3c180d05e9dfda892a93413514e99f0cbb19). This will enable HDMI_5V for USB Amlogic Meson GXL P212 based boards. Signed-off-by: Loic Devulder <ldevulder@suse.de>
2018-07-20stm32mp1: clock tree updatePatrick Delaunay
Configure clock tree for all the devices. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20stm32mp1: add support for stm32mp157c-ev1 boardPatrick Delaunay
Add support of stm32mp157c-ev1, the evaluation board with pmic stpmu1 (ev1 = mother board + daughter ed1) with device tree. EV1 is the selected board by default in basic defconfig. PS: CONFIG_PINCTRL_FULL activation avoid to increase SYS_MALLOC_F_LEN (Early malloc usage: 2034) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20dts: import stm32mp1 device tree from linux kernelPatrick Delaunay
This patch rebase the stm32mp1 device tree source from linux kernel v4.18-rc1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-19board/BuR/brppt1: convert brppt1 boards to driver modelHannes Schmelzer
- add a devicetree for each variant (mmc, spi, nand) - drop unneeded code from board and bur/common - drop unneeded stuff from config header files - minor adaptions to be compliant with driver model (requesting gpio,..) - harmonize the commandset over all brppt1 targets Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19dts: am33xx: add u-boot, dm-spl to ocp busHannes Schmelzer
This is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19dts: db820c: added smem nodesRamon Fried
Added necessary nodes for Qualcomm smem driver. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19dts: db410c: added smem nodesRamon Fried
Added necessary nodes for Qualcomm smem driver. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19boards: amlogic: Add FriendlyElec NanoPi K2 board supportThomas McKahan
This adds platform code for the FriendlyElec NanoPi K2 board based on a Meson GXBB (S905) SoC with the Meson GXBB configuration. This initial submission only supports: - UART - MMC/SDCard - Ethernet - Reset Controller - Clock controller Cc: Yuefei Tan <yftan@friendlyarm.com> Signed-off-by: Thomas McKahan <tonymckahan@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-19ARM: dts: sync meson-gxbb-nanopi-k2 from Linux 4.17Neil Armstrong
Get the meson-gxbb-nanopi-k2.dts file from Linux 4.17. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-19arm64: zynqmp: Add QSPI flash mini u-boot configurationSiva Durga Prasad Paladugu
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19arm: zynq: Add parallel NOR flash mini u-boot configuration for zynqSiva Durga Prasad Paladugu
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint OCM memory. This configuration only has required parallel nor flash support. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19arm: zynq: Add Nand flash mini u-boot configuration for zynqSiva Durga Prasad Paladugu
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of memory. This configuration has only required nand flash support. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19arm64: xilinx: Setup default number of chipselects for zcu100Michal Simek
There is only one chipselect on each connector. Define it directly in board dts file. There should be an option to use more chipselects via gpios. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-17Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-07-17sunxi: Enable eMMC on Libre Computer Board ALL-H3-CC boardsChen-Yu Tsai
The Libretech ALL-H3-CC has a high density connector for attaching an eMMC module. The module form factor and connection is specific to Libretech, and has provisions for split vmmc/vqmmc (core and I/O) voltage supplies, but this board does not wire the vqmmc side. The H2+/H3/H5 SoCs do not support alternate I/O voltages for eMMC either. Only 3.3V is supported. A specific module that ties vqmmc to vmmc, with both at 3.3V, must be used. Given that a) eMMC is not designed to be hotplugged, b) power is always provided on the pins, and c) MMC controllers can deal with missing cards, we can enable this by default. If a module is attached it will be picked up by the system. The device tree change was also submitted to the Linux Kernel and has already been queued up for 4.19. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16zynqmp: zcu102: Add qspi driver support for ZynqMP zcu102 boardsSiva Durga Prasad Paladugu
This patch adds qspi driver support for all ZynqMP ZCU102 boards. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
2018-07-16configs: Bananapi_M2_Ultra: enable gigabit ethernetLothar Felten
Enable the gigabit ethernet for the Bananapi M2 Ultra board. Tested on BananaPi M2 Berry (R40), custom board (V40) Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2018-07-16sunxi: R40: add gigabit ethernet devicetree nodeLothar Felten
Add a device tree node for the Allwinner R40/V40 GMAC gigabit ethernet interface. The R40 SoC does not use the syscon register for GMAC settings. The gigabit ethernet interface can only be routed to a fixed set of pins. Updated to match the Linux kernel's device tree. Signed-off-by: Lothar Felten <lothar.felten@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
2018-07-16sunxi: DT: A64: add proper SoPine baseboard device treeAndre Przywara
When the defconfig for the SoPine baseboard was added, there wasn't any proper DT for the board yet, so we used the Pine64 DT as a placeholder. Copy the DT file(s) meanwhile added in Linux over to U-Boot, and use them in our defconfig. This is as of v4.18-rc3, exactly Linux commit: commit 7d556bfc49adddf2beb0d16c91945c3b8b783282 Author: Jagan Teki <jagannadh.teki@gmail.com> Date: Mon Dec 4 10:23:07 2017 +0530 arm64: allwinner: a64-sopine: Fix to use dcdc1 regulator instead of vcc3v3 Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-16sunxi: DT: H3: update board .dts files from LinuxAndre Przywara
Update the .dts file for the various boards with an Allwinner H3 SoC. This is as of v4.18-rc3, exactly Linux commit: commit 721afaa2aeb860067decdddadc84ed16f42f2048 (HEAD) Merge: 7c00e8ae041b 87815dda5593 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Mon Jun 11 17:57:38 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc This also includes the OrangePi Zero .dts, which technically has an Allwinner H2+ SoC. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-16sunxi: DT: H5: update board .dts files from LinuxAndre Przywara
Update the .dts file for the various boards with an Allwinner H5 SoC. This is as of v4.18-rc3, exactly Linux commit: commit af5d05bdc99c211729cba0a3d5417bccfa308caf Author: Neil Armstrong <narmstrong@baylibre.com> Date: Tue Apr 24 13:47:14 2018 +0200 arm64: dts: allwinner: Add dts file for Libre Computer Board ALL-H3-CC H5 ver. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-16sunxi: DT: update device tree files for Allwinner H3 and H5 SoCsAndre Przywara
Update the device tree files from the Linux tree as of v4.18-rc3, exactly Linux commit: commit 55c5ba5e49a0a124ed416880e8227b493474495e Author: Chen-Yu Tsai <wens@csie.org> Date: Tue Apr 24 19:34:22 2018 +0800 arm64: dts: allwinner: h5: Add cpu0 label for first cpu Since the H3 and H5 are very similar (aside from the actual ARM cores), they share most the SoC .dtsi and thus have to be updated together. One tiny change is the removal of the "arm/" prefix from the include path in the sun50i-h5.dtsi, which is needed because we don't share the same sophisticated DT directory layout of Linux. Also we need to fix up the board .dts files already, since the .dtsi removes some pins, so the .dts can't reference them anymore. This is to maintain bisectability. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-16sunxi: DT: A64: update board .dts files from LinuxAndre Przywara
Update the .dts files for the various boards with an Allwinner A64 SoC. This is as of v4.18-rc3, exactly Linux commit: commit 818668055c9d588c9a9d151e3b258ed1adacba0b Author: Jagan Teki <jagan@amarulasolutions.com> Date: Mon Apr 23 12:02:39 2018 +0530 arm64: dts: allwinner: a64: bananapi-m64: add usb otg It updates the existing DT files, adds the newly added axp803.dtsi and removes our temporary kludge file to get Ethernet support in U-Boot. I left the amarula-relic alone, as this DT has not reached mainline yet. The changes are not critical anyway, and the next sync will fix this. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-16sunxi: DT: A64: update device tree file for Allwinner A64 SoCAndre Przywara
Updates the device tree file from the the Linux tree as of v4.18-rc3, exactly Linux commit: commit c1cff65f9b16b31e731e2e75bbe06638c86e1996 Author: Harald Geyer <harald@ccbib.org> Date: Thu Mar 15 16:25:08 2018 +0000 arm64: dts: allwinner: a64: add simplefb for A64 SoC This also pulls in the newly required include files for the clock and reset bindings, also removes the now redundant part from our *-u-boot.dtsi overlay file. I kept the PWM node from U-Boot, as we recently gained this explicitly for U-Boot's own usage and I don't want to regress here. This node is in the queue for mainline Linux already, so the next sync will make it all equal again. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-12arm: dts: socfpga: stratix10: Fix memory nodeLey Foon Tan
Commit 5dfd5607af2114047bd ("ARM: socfpga: Pull DRAM size from DT") get memory size from DT. So, we need to update memory size in memory node. Otherwise, it cause U-boot hang. Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2018-07-12ARM: socfpga: Make DRAM node available in SPLMarek Vasut
The SPL can also parse the DRAM configuration node to figure out the memory layout, make sure it is available. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-07-09arm: dts: bubblegum_96: Enable UART5 for serial consoleManivannan Sadhasivam
This commit enables UART5 found in S900 SoC for serial console support. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-07-09arm: dts: s900: Add UART nodeManivannan Sadhasivam
This commit adds UART node for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-07-09arm: dts: s900: Add Clock Management Unit (CMU) nodesManivannan Sadhasivam
This commit adds Clock Management Unit (CMU) nodes for Actions Semi S900 SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-07-09board: Add uCRobotics Bubblegum-96 board supportManivannan Sadhasivam
This commit adds uCRobotics Bubblegum-96 board support. This board is one of the 96Boards Consumer Edition platform based on Actions Semi S900 SoC. Features: - Actions Semi S900 SoC (4xCortex A53, Power VR G6230 GPU) - 2GiB RAM - 8GiB eMMC, uSD slot - WiFi, Bluetooth and GPS module - 2x Host, 1x Device USB port - HDMI - 20-pin low speed and 40-pin high speed expanders, 6 LED, 3 buttons U-Boot will be loaded by ATF at EL2 execution level. Relevant driver support will be added in further commits. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-07-09arm: Add support for Actions Semi OWL SoC familyManivannan Sadhasivam
This commit adds Actions Semi OWL SoC family support with S900 as the first target SoC. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2018-07-03Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-07-02board/aries: RemoveTom Rini
The various Aries Embedded boards have been orphaned for a year and no one has come forward to take care of them. Remove. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-27Merge git://git.denx.de/u-boot-imxTom Rini
2018-06-27imx6ul: geam: Fix fdt_file mismatchJagan Teki
fdt_file is looking for imx6ul-geam-kit.dtb but Linux has imx6ul-geam.dtb, since Linux skipped -kit on file name by below commit. "ARM: dts: imx6ul-geam: Skip suffix -kit from dts name" (sha1: 182de5ebce71e469cfa686fcdf08c9cbe11ece97) So, due to this mismatch U-Boot failed to pick the proper dtb which eventually break the Linux boot. This patch fixed this mismatch by - renaming dts files - update config option to use new dtb file - update fdt_file to new dtb file name Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
2018-06-27arm: dts: imx7: colibri: add raw NAND supportStefan Agner
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
generated by cgit (git 2.34.1) at 2024-12-29 13:09:48 +0000