summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-08-13ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all R40/V40 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: R40: commit c36fd5a48bd20820855e3e91a89297eeaa31836e Author: Chen-Yu Tsai <wens@csie.org> Date: Wed May 2 00:12:25 2018 +0800 ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller V40: commit c5f0bb472795170ab5c33be12e29ce7465fb31ed Author: Icenowy Zheng <icenowy@aosc.io> Date: Fri Apr 6 22:03:44 2018 +0800 ARM: sun8i: v40: enable USB host ports for Banana Pi M2 Berry Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # BPI-M2-Ultra, BPI-M2-Berry
2018-08-13ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A83T devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 221cb9fd2ee3042689fe0e6613d0f34eb46a5af6 Author: Mylène Josserand <mylene.josserand@bootlin.com> Date: Fri May 4 21:05:44 2018 +0200 ARM: dts: sun8i: Add enable-method for SMP support for the A83T SoC Note: bananapi-m3 and cubietruck-plus board dts files has usb_otg enabled in U-Boot which were not present in Linux. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-08-07Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini
2018-08-07Merge tag 'xilinx-for-v2018.09-rc2' of git://git.denx.de/u-boot-microblazeTom Rini
Xilinx fixes for v2018.09-rc2 xilinx: - Add support for zybo z7 and ultra96 - Tune zynq and zynqmp mini configurations - Move SYS_MALLOC_LEN to Kconfig fdt - make static funcs gpio: - Fix soft gpio driver - Fix Zynq gpio driver by using platdata microblaze: - Fix Kconfig entry spi - Move ISSI to Kconfig
2018-08-07arm: zynq: dts: add spi flash node to zedboardLuis Araneda
Add a flash node to fix the detection of the memory IC. With the changes introduced with commit 8fee8845e754 ("enf_sf: reuse setup_flash_device instead of open coding it") the SPI speed is now read from device-tree or a default value is applied. This replaced the old behavior of setting the SPI speed to CONFIG_ENV_SPI_MAX_HZ. As this board didn't have a flash node, the default value was applied to the SPI speed, producing an error when probing the flash memory (speed too slow). Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-07ARM: kirkwood: add SBx81LIFXCAT boardChris Packham
This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07arm: mvebu: clearfog: add u-boot, dm-spl tag for spiJon Nettleton
This is required so SPL and u-boot can boot from spi flash devices that use the dm drivers. Signed-off-by: Jon Nettleton <jon@solid-run.com> [baruch: use -u-boot.dtsi] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07arm: mvebu: helios4: remove duplicate sdhci pins nodeBaruch Siach
The same pinctrl node appears in the solidrun-microsom dtsi. Use that instead. Cc: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Dennis Gilmore <dennis@ausil.us> Tested-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07arm: mvebu: Better align Clearfog dts file with Linux kernelJon Nettleton
This makes changes so the u-boot dts file is structured more similar to the mainline linux dtsi file. It provides a minimal common dts that can work for most boards based on the ClearFog platform. Ethernet support is only supported for eth0 however all devices are left enabled so u-boot can generate and provide mac addresses for all of the network interfaces. Signed-off-by: Jon Nettleton <jon@solid-run.com> [baruch: rebase on recent changes] Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Dennis Gilmore <dennis@ausil.us> Tested-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07arm: mvebu: clearfog: use the microsom .dtsiBaruch Siach
Use hardware description from the recently introduced microsom .dtsi file to reduce duplication. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Dennis Gilmore <dennis@ausil.us> Tested-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-07arm: mvebu: solidrun-microsom: update SPI flash compatibleBaruch Siach
Add the "spi-flash" compatible string so that the generic sf_probe driver can probe the SPI flash on the SolidRun SOM. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-08-06arm64: zynqmp: Add support for Avnet Ultra96Michal Simek
Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynq: add support for the zybo z7 boardLuis Araneda
The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynq: Fix indentation for zynq-cse targetsMichal Simek
Trivial DT style fixes. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynq: Remove fclk-enable property for cse-nor targetMichal Simek
Mini cse NOR configuration is running without PL that's why there is no reason to enable clock to PL. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: zynqmp: Fix sdhci clock in emmc1 mini configurationMichal Simek
Add missing clocks property with fix clock-names property to be aligned with emmc0 configuration and binding doc. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-08-06arm: spring: fix alias of mmc correctlyMinkyu Kang
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06arm: exynos5: fix warning of dtsMinkyu Kang
remove this warning: avoid_unnecessary_addr_size Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-06arm: exynos4: fix warning of dtsMinkyu Kang
remove this warning: avoid_unnecessary_addr_size Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2018-08-04Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-08-03ARM: dts: stm32: remove cd-inverted for stm32429i-evalPatrice Chotard
As cd-inverted property is no more used by arm_pl180_mmci driver, remove it. Update cd-gpios active level accordingly. Reported-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-08-01binman: Rename 'position' to 'offset'Simon Glass
After some thought, I believe there is an unfortunate naming flaw in binman. Entries have a position and size, but now that we support hierarchical sections it is unclear whether a position should be an absolute position within the image, or a relative position within its parent section. At present 'position' actually means the relative position. This indicates a need for an 'image position' for code that wants to find the location of an entry without having to do calculations back through parents to discover this image position. A better name for the current 'position' or 'pos' is 'offset'. It is not always an absolute position, but it is always an offset from its parent offset. It is unfortunate to rename this concept now, 18 months after binman was introduced. However I believe it is the right thing to do. The impact is mostly limited to binman itself and a few changes to in-tree users to binman: tegra sunxi x86 The change makes old binman definitions (e.g. downstream or out-of-tree) incompatible if they use the 'pos = <...>' property. Later work will adjust binman to generate an error when it is used. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-07-31board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki
OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2018-07-31sunxi: add support for Pine H64 boardIcenowy Zheng
Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-31sunxi: add support for Allwinner H6 SoCIcenowy Zheng
Allwinner H6 is a new SoC from Allwinner features USB3 and PCIe interfaces. This patch adds support for it. The corresponding DTSI file, from Linux next-20180720, is also introduced. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-27Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini
2018-07-26tegra: beaver/apalis: Fix DTC warningTom Warren
Fix warning when compiling tegra30-beaver/-apalis.dts with latest DTC: "Warning (avoid_unnecessary_addr_size): /pci/pch@1f,0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property" Signed-off-by: Tom Warren <twarren@nvidia.com>
2018-07-26armv8: dts: fsl-ls1012a: add sata node supportYuantian Tang
One ls1012a, there is one SATA 3.0 advanced host controller interface which is a high-performance SATA solution that delivers comprehensive and fully-compliant generation 3 (1.5 Gb/s - 6.0 Gb/s) serial ATA capabilities, in accordance with the serial ATA revision 3.0 of Serial ATA International Organization. Add sata node to support this feature. Signed-off-by: Tang Yuantian <andy.tang@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-25ARM: dts: socfpga: Adjust NAND register layout on Arria10Marek Vasut
Adjust the NAND register size on Arria10 to reflect reality. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org>
2018-07-23ARM: DTS: am3517-evm-u-boot: Mark MMC1 with cd-invertedAdam Ford
In order to use the device tree for MMC, the card-detect pin needs to be inverted. This patch places this into the am3517-evm-u-boot.dtsi file to keep the main DTS and DTSI files clean and in-sync with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: dts: am3517-evm-uboot: Add reg-shift for UARTAdam Ford
With the resync of the omap3.dtsi file, the reg-shift was removed so it breaks the UART. Adding the reg-shift into the am3517-evm-u-boot.dtsi keeps the reg-shift for U-Boot, but keeps the dts/dtsi files clean from Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync Logic PD SOM-LV 37xx devkit with Linux 4.18-RC4Adam Ford
There have been some significant changes to the DM37 SOM-LV device tree. This patch re-syncs it with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.18-RC4Adam Ford
There have been some refactoring of the DTS files for the Logic PD DM37 Torpedo. This patch re-sync's the DTS files with Linux Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: dts: Resync OMAP3 and omap36xx with Linux 4.18-RC4Adam Ford
There have been several minor changes to the OMAP3.dtsi, so this patch re-syncs it with Linux. An addition include/dt-binding was also brought with it. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23ARM: DTS: Resync am3517-evm.dts with Linux 4.18-rc4Adam Ford
Several changes have been made to the AM3517-evm and the underlying am3517.dtsi file. This patch re-sync's the DTS and DTSI files with Linux. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-07-23board: toradex: add Colibri iMX6ULL supportStefan Agner
Add support for the Colibri iMX6ULL module which comes with on-board raw NAND. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-23ARM: dts: imx6ull: use same compatible string as Linux is usingStefan Agner
The GPMI NAND IP seems to be the same as used in i.MX 6Quad. Use the fsl,imx6q-gpmi-nand compatible string like Linux devices trees are. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
2018-07-20ARM64: meson: Sync DT with Linux 4.17.5Loic Devulder
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.5 (Linux commit 54fb3c180d05e9dfda892a93413514e99f0cbb19). This will enable HDMI_5V for USB Amlogic Meson GXL P212 based boards. Signed-off-by: Loic Devulder <ldevulder@suse.de>
2018-07-20stm32mp1: clock tree updatePatrick Delaunay
Configure clock tree for all the devices. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20stm32mp1: add support for stm32mp157c-ev1 boardPatrick Delaunay
Add support of stm32mp157c-ev1, the evaluation board with pmic stpmu1 (ev1 = mother board + daughter ed1) with device tree. EV1 is the selected board by default in basic defconfig. PS: CONFIG_PINCTRL_FULL activation avoid to increase SYS_MALLOC_F_LEN (Early malloc usage: 2034) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-20dts: import stm32mp1 device tree from linux kernelPatrick Delaunay
This patch rebase the stm32mp1 device tree source from linux kernel v4.18-rc1. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2018-07-19board/BuR/brppt1: convert brppt1 boards to driver modelHannes Schmelzer
- add a devicetree for each variant (mmc, spi, nand) - drop unneeded code from board and bur/common - drop unneeded stuff from config header files - minor adaptions to be compliant with driver model (requesting gpio,..) - harmonize the commandset over all brppt1 targets Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19dts: am33xx: add u-boot, dm-spl to ocp busHannes Schmelzer
This is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
2018-07-19dts: db820c: added smem nodesRamon Fried
Added necessary nodes for Qualcomm smem driver. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19dts: db410c: added smem nodesRamon Fried
Added necessary nodes for Qualcomm smem driver. Signed-off-by: Ramon Fried <ramon.fried@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-19boards: amlogic: Add FriendlyElec NanoPi K2 board supportThomas McKahan
This adds platform code for the FriendlyElec NanoPi K2 board based on a Meson GXBB (S905) SoC with the Meson GXBB configuration. This initial submission only supports: - UART - MMC/SDCard - Ethernet - Reset Controller - Clock controller Cc: Yuefei Tan <yftan@friendlyarm.com> Signed-off-by: Thomas McKahan <tonymckahan@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-19ARM: dts: sync meson-gxbb-nanopi-k2 from Linux 4.17Neil Armstrong
Get the meson-gxbb-nanopi-k2.dts file from Linux 4.17. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-07-19arm64: zynqmp: Add QSPI flash mini u-boot configurationSiva Durga Prasad Paladugu
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of internal memory. This configuration has only required qspi flash support and it uses DCC as serial. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19arm: zynq: Add parallel NOR flash mini u-boot configuration for zynqSiva Durga Prasad Paladugu
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint OCM memory. This configuration only has required parallel nor flash support. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-07-19arm: zynq: Add Nand flash mini u-boot configuration for zynqSiva Durga Prasad Paladugu
Add configuration files/dtses for mini u-boot configuration which runs on smaller footprint of memory. This configuration has only required nand flash support. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit (git 2.34.1) at 2025-01-06 08:49:37 +0000