summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2018-10-18ARM: dts: rmobile: Build -u-boot variants of DTsMarek Vasut
Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: r8a77990: Add USB2.0(EHCI) DT nodes on EbisuHiroyuki Yokoyama
Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-16arm: zynq: Add efuse node for Zynq-7000S devicesMichal Simek
Add access to efuse for Zynq-7000S device detection. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm: zynq: Add support for DLC20 boardMichal Simek
Xilinx DLC20 has I2C0 with EEPROM(1KB), UART1, GPIO, SD0 (EMMC 4GB), USB0 device, ENET0, QSPI (16MB) and DDR(two of 256MB each). Boards have mix of Winbond/ST QSPIs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-10Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-10ARM: meson: Add Khadas VIM2 board DTLoic Devulder
This adds Device Tree for the Khadas VIM2 board. The meson-gxm-khadas-vim2.dts is synchronized from Linux 4.18.10. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-10ARM: dts: stm32mp1: Add usbotg_hs regulator for stm32mp157c-ev1Patrice Chotard
Add usbotg_hs regulator to allow to use the USB mass-storage feature on OTG usb port. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-10-09ARM: dts: rmobile: Reinstate missing CPLD on ULCBMarek Vasut
The CPLD is used to reset the ULCB and it was removed during DT sync with Linux 4.17. Reinstate it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-07arm: dt: hikey: Add optee nodeJens Wiklander
Sync with 14e21cb8f811 ("arm64: dt: hikey: Add optee node" from Linux kernel. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
2018-10-06ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 TorpedoAdam Ford
With the device trees doing most of the work of pin-muxing and DM doing much of the peripheral initialization, this creates new defconfig files for each of the Logic PD variants with proper register settings/pin-muxing. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-06ARM: DTS: Add support for Logic PD OMAP35 Torpedo & SOM-LVAdam Ford
The baseboards and SOM's are virtually identical to their DM37 counterparts, but OMAP36/37 and OMAP3 have some minor register differences. With the boards being mostly driven by device trees now, this synchronizes their respective device trees with linux-omap for-next branch destined for 4.20 (or whatever the version after 4.19 will be called) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: Remove unnecessary u-boot.dtsi options from omap3/36xxAdam Ford
With the introduction of the omap serial driver, the need for some of these U-Boot specific modifications is gone. This cleans up this unnneeded stuff. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-06ARM: DTS: LogicPD-SOM-LV & Torpedo: Resync DTS with KernelAdam Ford
The device tree entries are from linux-omap's for-next branch destined to me put into 4.20 (or whatever the version is after 4.19) Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-05Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-03ARM: dts: rmobile: Reinstate missing i2c6 on PorterMarek Vasut
The I2C6 is used to communicate with the PMIC and it was removed during DT sync with Linux 4.17. Reinstate it. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2018-10-02rockchip: rk3188: explicitly set vcc_sd0 pin to gpio on rk3188-radxarockHeiko Stuebner
It is good practice to make the setting of gpio-pinctrls explicitly in the devicetree, and in this case even necessary. Rockchip boards start with iomux settings set to gpio for most pins and while the linux pinctrl driver also implicitly sets the gpio function if a pin is requested as gpio that is not necessarily true for other drivers. The issue in question stems from uboot, where the sdmmc_pwr pin is set to function 1 (sdmmc-power) by the bootrom when reading the 1st-stage loader. The regulator controlled by the pin is active-low though, so when the dwmmc hw-block sets its enabled bit, it actually disables the regulator. By changing the pin back to gpio we fix that behaviour. [picked from the identical linux patch https://patchwork.kernel.org/patch/10609253/] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-10-02rockchip: rk3188: add u-boot-specific mmc propertiesHeiko Stuebner
The dwmmc controllers on rk3188 do not have idma support, so need to use the fifo-mode and it my tests they became confused and stopped working if the frequency was to high. While I only tested in somewhat bigger steps, 32MHz for example hung the controller, while reducing it to 16MHz worked just fine and is reasonably fast to load a kernel from mmc. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-09-30dts: db410c: Add bindings for MSM USB phyRamon Fried
Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-30dts: db410c: add alias for USBRamon Fried
Alias is required so req-seq will be filled. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
2018-09-29Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini
2018-09-29Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
Switch to driver model for eSDHC on Layerscape SoCs including LS1021A, LS1043A, LS1046A, LS1088A, LS2088A. Switch to driver model for SATA on LS1021A and LS1043A. Add support for LS1012AFRWY rev C board. Enable SMMU for LS1043A.
2018-09-29ARM: DTS: various omap3: Remove cd-inverted from u-boot.dtsiAdam Ford
With the omap_mmc driver no longer supporting cd-inverted, this patch removes all these references since they are not needed. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-28ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eepromEugen Hristev
Add onewire node in device tree for TM series LCDs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A23/A33/r16 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commits. A23: commit bc3bd041fe766219a44688b182c260064007f0cc Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:02 2018 +0200 ARM: dts: sun8i: a23/a33: declare NAND pins A33: commit 88fe315d2c0a397ef42d7639addab0e021ae911d Author: Maxime Ripard <maxime.ripard@bootlin.com> Date: Wed Apr 4 11:57:15 2018 +0200 ARM: dts: sun8i: a33: Add the DSI-related nodes r16: commit 9621d0bd1b0d61167e1853ac68cf4869c31bcc96 Author: Miquel Raynal <miquel.raynal@bootlin.com> Date: Tue Apr 24 17:55:03 2018 +0200 ARM: dts: nes: add Nintendo NES/SuperNES Classic Edition support Note: - Drop pinctrl from sun8i-r16-nintendo-nes-classic-edition.dts since sun8i-a23-a33.dtsi is added with Linux sync. - Don't sync non U-Boot supported dts files sun8i-a23-ippo-q8h-v1.2.dts sun8i-a23-ippo-q8h-v5.dts sun8i-a33-et-q8-v1.6.dts sun8i-a33-ippo-q8h-v1.2.dts sun8i-r16-nintendo-nes-classic.dts sun8i-r16-nintendo-super-nes-classic.dts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 5d9ef839f874f4e3923c8a9ae7b136c6c3912cd5 Author: Stefan Mavrodiev <stefan@olimex.com> Date: Wed May 16 14:38:08 2018 +0300 ARM: dts: sun7i: Add Olimex A20-SOM-EVB-eMMC board Note: - Update sun7i-a20-primo73.dts as per Linux, since this dts is U-Boot specific. - Drop sun7i-a20-olimex-som-evb-emmc.dts since no board added for this. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A31/A31s devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit b240b419db5d624ce7a5a397d6f62a1a686009ec Merge: 9c2dd8405c0c 518d2f43c358 Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Thu Apr 5 21:18:09 2018 -0700 Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10s/A13/gr8/r8devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 190e3138f9577885691540dca59c2f07540bde04 Merge: cafc87023b0d a7affb13b271 Author: Arnd Bergmann <arnd@arndb.de> Date: Tue Mar 27 14:58:00 2018 +0200 Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-28ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3Jagan Teki
Update all A10 devicetree dtsi and dtsi files from Linux-v4.18-rc3 with below commit: commit 590b0c0cfc6162aeebbf43eaafb9753b56df1532 Author: Pascal Roeleven <dev@pascalroeleven.nl> Date: Fri Apr 20 12:21:12 2018 +0200 ARM: dts: sun4i: Fix incorrect clocks for displays Note: Update pinctrl-0 for sun4i-a10-inet-3f.dts, sun4i-a10-inet-3w.dts like other dts file since there dts file are U-Boot specific. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
2018-09-27armv7: dts: fsl-ls1021a: add sata node support enable sata for ls1021a-qds ↵Peng Ma
and ls1021a-twr Add sata node to support this feature. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: dts: fsl-ls1043a: add sata node supportPeng Ma
Add sata node to support ls1043a. Signed-off-by: Peng Ma <peng.ma@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv7: ls1021a: enable esdhcYinbo Zhu
This patch is to enable eSDHC for ls1021a. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1046a: add eSDHC nodeYinbo Zhu
This patch is to add eSDHC node for ls1046a. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1043a: add eSDHC nodeYinbo Zhu
This patch is to add eSDHC node for ls1043a. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls1088a: add eSDHC nodeYinbo Zhu
This patch is to add eSDHC node for ls1088a. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-27armv8: ls2088a: add eSDHC nodeYinbo Zhu
This patch is to add eSDHC node for ls2088a. Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-09-25ARM: dts: stm32mp1: Add EHCI support for stm32mp157c-ev1 boardPatrice Chotard
Add DT nodes to enable EHCI support Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-09-25ARM: dts: stm32mp1: Add usb gadget support for stm32mp157c-ev1 boardPatrice Chotard
Add DT nodes to enable DWC2 gadget support Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-09-19board: turris_mox: Fixup U-Boot's device tree if PCIe connectedMarek Behún
If PCIe Mox module is connected we want to have PCIe node enabled in U-Boot's device tree. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19dts: mvebu: mcbin: drop redundant SD slot nodeBaruch Siach
Commit 61dccf73d302 (dts: mvebu: a80x0: Enable SD/eMMC interfaces) added a redundant DT node for SD card slot. Drop it. Cc: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-19arch/arm/dts: Update Turris Mox device treeMarek Behún
Remove smi_pins definition since it is already in armada-37xx.dtsi. Add assigned-clocks definitions to spi0. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
2018-09-11ARM: dts: da850-evm-u-boot: Remove redundant entriesAdam Ford
With the re-sync from Linux 4.18, several entries in da850-evm-u-boot.dtsi are no longer necessary, so this patch removes them. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-11arm: dts: da850: Re-sync da850-evm.dts from Linux 4.18Adam Ford
Signed-off-by: Adam Ford <aford173@gmail.com>
2018-09-11Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini
2018-09-11arm64: dts: k3: Add u-boot specific nodesLokesh Vutla
Add the minimum dt nodes required to boot. These nodes will get deleted as kernel gets these nodes added in the main dts files. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11arm64: dts: k3: Add Support for AM654 SoCLokesh Vutla
Add initial DT support for AM654 EVM that runs on A53. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2018-09-11mmc: uniphier-sd: sync with LinuxMasahiro Yamada
Sync with the driver code and the binding recently merged in Linux. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit (git 2.34.1) at 2024-12-28 18:35:46 +0000