summaryrefslogtreecommitdiff
path: root/arch/arm/dts
AgeCommit message (Collapse)Author
2016-04-13ARM64: zynqmp: Fix coding style for pcieMichal Simek
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Extend pcie node to support legacy interruptsBharat Kumar Gogada
Modifying device tree node to support legacy interrupts. Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add interrupt-controller property to gpio nodesMichal Simek
GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add ddrc node in dtsNaga Sureshkumar Relli
This patch adds ddrc memory controller node in dts. size mentioned in dts is 0x30000, because we need to access DDR_QOS INTR registers located at fd090208 from this driver. Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Added clocks to DTVNSL Durga
ZynqMP DMA's main clock and apb clock are added in zynqmp DT. Signed-off-by: VNSL Durga <vnsldurg@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
2016-04-13ARM64: zynqmp: Add CCI-400 nodeMichal Simek
Add CCI-400 node to DTSI. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add missing interrupt-parent to PMU nodeMichal Simek
ZynqMP is not using global interrupt-parent setting that's why it has to be listed in every node separately. PMU node missed it and this patch is adding it. Reported-by: John Linn <John.Linn@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: DT: Add power domainsSoren Brinkmann
Add power-domains to the DT and attach devices to them. The power-domains are all logical domains as understood by firmware. Each PD is identified by a unique identifier that the platform firmware understands. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodesP L Sai Krishna
This patch adds broken-tuning property to SD and eMMC nodes. Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Sync GEM nodes with LinuxMichal Simek
Remove jumbo properties which are handled in the driver directly and use mainline compatible string which is already handled by the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Hook up the GEMs to the SMMUEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Correct IRQ nr for the SMMUEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add 8-bit bus width property.P L Sai Krishna
This patch add 8-bit bus width property to eMMC node. Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: dt: Change qspi node compatible stringRanjit Waghmode
This patch makes compatible string as "m25p80" for qspi node in ep108 device tree file Signed-off-by: Ranjit Waghmode <ranjit.waghmode@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Add missing mmc aliasesMichal Simek
Add missing mmc aliases. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM64: zynqmp: Use C pre-processor for includes in dtsAlistair Francis
Change the dtsi include code to use the C pre-processor #include instead of the device tree /include/. This brings all ZynqMP device trees inline with each other. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Fix usb phy node for ZyboMichal Simek
Compatible property should be the first. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Extend microzed board supportMichal Simek
Add missing DT nodes and enable USB. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13ARM: zynq: Add missing qspi for xm013Michal Simek
Add missing qspi node and make qspi as spi0. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Create empty line below headersMichal Simek
Sync with others zynq DTS files. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Align spi and qspi node locationsMichal Simek
Keep nodes alphabelitally sorted. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
2016-04-13ARM: zynq: zc706: Add adv7511 on i2c busChristian Kohn
Add missing adv7511 and configure to match Base TRD. Signed-off-by: Christian Kohn <christian.kohn@xilinx.com> Reviewed-by: Nathan Rossi <nathan@nathanrossi.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: zc702: Add adv7511 on i2c busChristian Kohn
Add bindings for adv7511. Signed-off-by: Christian Kohn <christian.kohn@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: DT: Add ethernet phy reset informationPunnaiah Choudary Kalluri
Added phy reset gpio information for gem0. Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Fix bootargs in board dtsiMichal Simek
- Sync with Linux kernel - Remove rootfs - Remove earlyprintk Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Align devcfg nodeMichal Simek
- Have compatible string as the first property - Sync with Linux kernel dtsi - Add missing interrupt properties Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: dts: Updated devicetree bindings for Zynq 7000 platformMoritz Fischer
Added addtional bindings required for FPGA Manager operation of the Xilinx Zynq Devc configuration interface. Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.Moritz Fischer
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com> Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13ARM: zynq: Add interrupt-controller property to gpio nodesMichal Simek
GPIO driver supports an input interrupt that's why gpio node itself can be labeled as interrupt controller. Reported-by: John Linn <linnj@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-12sunxi: Add defconfig and dts file for Orange Pi One SBCHans de Goede
The Orange Pi One SBC, is a stripped down version of the popular Orange Pi PC. The one is a H3 based SBC, with 512M of RAM, micro-sd slot, 1 host usb, 1 otg usb, hdmi and 100Mbit ethernet. The dts is identical to the dts submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-12sunxi: Enable usb ports on the Sinovoip BPI M3Hans de Goede
DLDO3 is used to provide Port-D power and PD is used for the usb-hub / sata-5v enable pins. The 2.5V comes from the schematic and matches the factory image fex file. The dts changes are the minimal changes needed for u-boot to pick-up the usb host controllers. The upstream kernel does not (yet) have usb host support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
2016-04-04arm: mvebu: Add basic support for Armada 375 eval board db-88f6720Stefan Roese
This patch adds basic support for the Marvell A375 eval board. Tested are the following interfaces: - I2C - SPI - SPI NOR - Ethernet (mvpp2), port 0 & 1 Currently the A375 SerDes and DDR3 init code is not intergrated. So the SPL U-Boot is not fully functional. Right now, this A375 mainline U-Boot can only be used by chainloading it via the original Marvell U-Boot. This can be done via this command: => tftpboot 00800000 a375/u-boot-dtb.bin;go 00800000 Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
2016-04-01board: Add Qualcomm Dragonboard 410C supportMateusz Kulikowski
This commit add support for 96Boards Dragonboard410C. It is board based on APQ8016 Qualcomm SoC, complying with 96boards specification. Features (present out of the box): - 4x Cortex A53 (ARMv8) - 2x USB Host port - 1x USB Device port - 4x LEDs - 1x HDMI connector - 1x uSD connector - 3x buttons (Power, Vol+, Vol-/Reset) - WIFI, Bluetooth with integrated antenna - 8GiB eMMC U-Boot boots chained with fastboot in 64-bit mode. For detailed build instructions see readme.txt in board directory. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-04-01sunxi: Add Pine64+ supportSiarhei Siamashka
The Pine64+ is a system based on the Allwinner A64 SoC. It is capable of running AArch64 code and thus is the first of its kind for the sunxi target. This patch adds a defconfig and device tree chunks for it. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: Change patch description] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Add support for Allwinner A64 SoCsSiarhei Siamashka
The Allwinner A64 SoC is used in the Pine64. This patch adds all bits necessary to compile U-Boot for it running in AArch64 mode. Unfortunately SPL is not ready yet due to legal problems, so we need to boot using the binary boot0 for now. Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> [agraf: remove SPL code, move to AArch64] Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Enable USB nodes for H8Homlet v2Chen-Yu Tsai
This provides the minimal changes to the H8Homlet v2 dts to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Enable USB on Cubietruck PlusChen-Yu Tsai
This provides the minimal changes to the Cubietruck Plus dts to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01sunxi: Add USB and R_PIO nodes to sun8i-a83t.dtsiChen-Yu Tsai
This provides the minimal changes to the A83T dtsi to enable USB in U-boot. It is not what will be submitted to the kernel. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-04-01ARM: uniphier: enable eMMC on PH1-sLD3 reference boardMasahiro Yamada
On PH1-sLD3, eMMC and NAND are assigned to different I/O pins. Both devices can be enabled at the same time. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01ARM: dts: uniphier: add NAND pinmux nodeMasahiro Yamada
This will be used to set up pin-muxing for the NAND controller. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-04-01ARM: dts: uniphier: add clock-frequency to serial nodes of LD11/LD20Masahiro Yamada
Since no clock driver is implemented for peripherals in U-Boot yet, this property is needed for the serial driver to set up the divisor register. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-29Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini
2016-03-29armv8/ls1043aqds: dts: Set SPI mode for DSPIQianyu Gong
Clock phase and polarity for DSPI flash need to be set. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2016-03-27Fix typo in chosen parameter of pcm052.dtsAlexander Merkle
Fix typo "choosen" instead of "chosen" in pcm052.dts. Not tested but should fix boot process and terminal output. Signed-off-by: Alexander Merkle <alexander.merkle@lauterbach.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-27Fix typo in chosen parameter in vf610-twr.dtsAlexander Merkle
Fix typo "choosen" instead of "chosen" in vf610-twr.dts. Fixes boot process and terminal output for Vybrid series. Signed-off-by: Alexander Merkle <alexander.merkle@lauterbach.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-25Merge git://www.denx.de/git/u-boot-marvellTom Rini
2016-03-24arm: mvebu: theadorable: Add StratixV FPGA programming supportStefan Roese
This patch adds support for Altera StratixV bitstream programming. 2 FPGAs are connected to the SPI busses. This patch uses board specific write code to program the bitstream via SPI direct write mode. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Stefan Roese <sr@denx.de>
2016-03-23Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini
2016-03-23sunxi: Add defconfig and dts for Orange Pi 2 SBCHans de Goede
The Orange Pi 2 is a SBC based on the Allwinner H3 SoC with a uSD slot, 4 USB ports connected via a USB-2 hub, a 10/100M ethernet port using the SoC's integrated PHY, Wifi via a RTL8189ETV sdio wifi chip, USB OTG, HDMI, a TRRS headphone jack for stereo out and composite out, a microphone, an IR receiver, a CSI connector, 2 LEDs, a 3 pin UART header and a 40-pin GPIO header. The added dts file is identical to the one submitted to the upstream kernel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
generated by cgit (git 2.34.1) at 2025-01-08 04:14:47 +0000